linux-toradex.git/drivers/scsi/device_handler, branch v4.10

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2016-12-14T18:49:33+00:00

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates (ncr5380,
  lpfc, hisi_sas, megaraid_sas, ufs, ibmvscsis, mpt3sas).

  There's also an assortment of minor fixes, mostly in error legs or
  other not very user visible stuff. The major change is the
  pci_alloc_irq_vectors replacement for the old pci_msix_.. calls; this
  effectively makes IRQ mapping generic for the drivers and allows
  blk_mq to use the information"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (256 commits)
  scsi: qla4xxx: switch to pci_alloc_irq_vectors
  scsi: hisi_sas: support deferred probe for v2 hw
  scsi: megaraid_sas: switch to pci_alloc_irq_vectors
  scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devices
  scsi: be2iscsi: set errno on error path
  scsi: be2iscsi: set errno on error path
  scsi: hpsa: fallback to use legacy REPORT PHYS command
  scsi: scsi_dh_alua: Fix RCU annotations
  scsi: hpsa: use %phN for short hex dumps
  scsi: hisi_sas: fix free'ing in probe and remove
  scsi: isci: switch to pci_alloc_irq_vectors
  scsi: ipr: Fix runaway IRQs when falling back from MSI to LSI
  scsi: dpt_i2o: double free on error path
  scsi: cxlflash: Migrate scsi command pointer to AFU command
  scsi: cxlflash: Migrate IOARRIN specific routines to function pointers
  scsi: cxlflash: Cleanup queuecommand()
  scsi: cxlflash: Cleanup send_tmf()
  scsi: cxlflash: Remove AFU command lock
  scsi: cxlflash: Wait for active AFU commands to timeout upon tear down
  scsi: cxlflash: Remove private command pool
  ...

Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-block

2016-12-13T18:19:16+00:00

Pull block layer updates from Jens Axboe:
 "This is the main block pull request this series. Contrary to previous
  release, I've kept the core and driver changes in the same branch. We
  always ended up having dependencies between the two for obvious
  reasons, so makes more sense to keep them together. That said, I'll
  probably try and keep more topical branches going forward, especially
  for cycles that end up being as busy as this one.

  The major parts of this pull request is:

   - Improved support for O_DIRECT on block devices, with a small
     private implementation instead of using the pig that is
     fs/direct-io.c. From Christoph.

   - Request completion tracking in a scalable fashion. This is utilized
     by two components in this pull, the new hybrid polling and the
     writeback queue throttling code.

   - Improved support for polling with O_DIRECT, adding a hybrid mode
     that combines pure polling with an initial sleep. From me.

   - Support for automatic throttling of writeback queues on the block
     side. This uses feedback from the device completion latencies to
     scale the queue on the block side up or down. From me.

   - Support from SMR drives in the block layer and for SD. From Hannes
     and Shaun.

   - Multi-connection support for nbd. From Josef.

   - Cleanup of request and bio flags, so we have a clear split between
     which are bio (or rq) private, and which ones are shared. From
     Christoph.

   - A set of patches from Bart, that improve how we handle queue
     stopping and starting in blk-mq.

   - Support for WRITE_ZEROES from Chaitanya.

   - Lightnvm updates from Javier/Matias.

   - Supoort for FC for the nvme-over-fabrics code. From James Smart.

   - A bunch of fixes from a whole slew of people, too many to name
     here"

* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
  blk-stat: fix a few cases of missing batch flushing
  blk-flush: run the queue when inserting blk-mq flush
  elevator: make the rqhash helpers exported
  blk-mq: abstract out blk_mq_dispatch_rq_list() helper
  blk-mq: add blk_mq_start_stopped_hw_queue()
  block: improve handling of the magic discard payload
  blk-wbt: don't throttle discard or write zeroes
  nbd: use dev_err_ratelimited in io path
  nbd: reset the setup task for NBD_CLEAR_SOCK
  nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
  nvme-fabrics: Add target support for FC transport
  nvme-fabrics: Add host support for FC transport
  nvme-fabrics: Add FC transport LLDD api definitions
  nvme-fabrics: Add FC transport FC-NVME definitions
  nvme-fabrics: Add FC transport error codes to nvme.h
  Add type 0x28 NVME type code to scsi fc headers
  nvme-fabrics: patch target code in prep for FC transport support
  nvme-fabrics: set sqe.command_id in core not transports
  parser: add u64 number parser
  nvme-rdma: align to generic ib_event logging helper
  ...

scsi: scsi_dh_alua: Fix RCU annotations

2016-12-05T22:09:29+00:00

This patch avoids that sparse complains about RCU pointer dereferences.

Signed-off-by: Bart Van Assche 
Cc: Hannes Reinecke 
Cc: tang.junhui 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: scsi_dh_alua: Fix a reference counting bug

2016-11-01T17:32:24+00:00

The code at the end of alua_rtpg_work() is as follows:

	scsi_device_put(sdev);
	kref_put(&pg->kref, release_port_group);

In other words, alua_rtpg_queue() must hold an sdev reference and a pg
reference before queueing rtpg work. If no rtpg work is queued no
additional references should be held when alua_rtpg_queue() returns. If
no rtpg work is queued, ensure that alua_rtpg_queue() only gives up the
sdev reference if that reference was obtained by the same
alua_rtpg_queue() call.

Signed-off-by: Bart Van Assche 
Reported-by: Tang Junhui 
Cc: Hannes Reinecke 
Cc: Tang Junhui 
Cc: 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen

scsi: scsi_dh_alua: fix missing kref_put() in alua_rtpg_work()

2016-11-01T17:31:08+00:00

Reference count of pg leaks in alua_rtpg_work() since kref_put() is not
called to decrease the reference count of pg when the condition
pg->rtpg_sdev==NULL satisfied (actually it is easy to satisfy), it would
cause memory of pg leakage.

Signed-off-by: tang.junhui 
Cc: 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen

block: split out request-only flags into a new namespace

2016-10-28T14:45:17+00:00

A lot of the REQ_* flags are only used on struct requests, and only of
use to the block layer and a few drivers that dig into struct request
internals.

This patch adds a new req_flags_t rq_flags field to struct request for
them, and thus dramatically shrinks the number of common requests.  It
also removes the unfortunate situation where we have to fit the fields
from the same enum into 32 bits for struct bio and 64 bits for
struct request.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Shaun Tancheff 
Signed-off-by: Jens Axboe

scsi: scsi_dh_alua: Fix memory leak in alua_rtpg()

2016-09-27T00:42:38+00:00

buff should be freed before returning with SCSI_DH_RETRY in alua_rtpg().

Signed-off-by: tang.junhui 
Signed-off-by: Martin K. Petersen

Merge branch 'fixes' into misc

2016-05-18T01:12:50+00:00

scsi_dh_alua: do not fail for unknown VPD identification

2016-05-11T01:31:17+00:00

Not every device will return a useable VPD identification, but still
might support ALUA. Rather than disable ALUA support we should be
allowing the device identification to be empty and attach individual
ALUA device handler to each devices.

[mkp: Fixed typo reported by Bart]

Reported-by: Paul Mackerras 
Signed-off-by: Hannes Reinecke 
Tested-by: Paul Mackerras 
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen

scsi_dh_alua: uninitialized variable in alua_rtpg()

2016-04-30T16:24:50+00:00

It's possible to use "err" without initializing it.  If it happens to be
a 2 which is SCSI_DH_RETRY then that could cause a bug.  Bart Van Assche
pointed out that we should probably re-initialize it for every iteration
through the retry loop.

Signed-off-by: Dan Carpenter 
Reviewed-by: Hannes Reinicke 
Signed-off-by: Martin K. Petersen 
Signed-off-by: James Bottomley