linux-toradex.git/drivers/scsi/eata.c, branch v3.11

[SCSI] remove cmd->serial_number litter

2011-05-01T15:22:40+00:00

Stop using cmd->serial_number in printks.

Signed-off-by: Christoph Hellwig 
Signed-off-by: James Bottomley

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi

SCSI host lock push-down

2010-11-16T21:33:23+00:00

Move the mid-layer's ->queuecommand() invocation from being locked
with the host lock to being unlocked to facilitate speeding up the
critical path for drivers who don't need this lock taken anyway.

The patch below presents a simple SCSI host lock push-down as an
equivalent transformation.  No locking or other behavior should change
with this patch.  All existing bugs and locking orders are preserved.

Additionally, add one parameter to queuecommand,
	struct Scsi_Host *
and remove one parameter from queuecommand,
	void (*done)(struct scsi_cmnd *)

Scsi_Host* is a convenient pointer that most host drivers need anyway,
and 'done' is redundant to struct scsi_cmnd->scsi_done.

Minimal code disturbance was attempted with this change.  Most drivers
needed only two one-line modifications for their host lock push-down.

Signed-off-by: Jeff Garzik 
Acked-by: James Bottomley 
Signed-off-by: Linus Torvalds

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo 
Guess-its-ok-by: Christoph Lameter 
Cc: Ingo Molnar 
Cc: Lee Schermerhorn

[SCSI] eata: fix buffer overflow

2010-01-18T16:48:07+00:00

Allows i == MAX_INT_PARAM, which is out of range.

Signed-off-by: Roel Kluin 
Signed-off-by: Andrew Morton 
Signed-off-by: James Bottomley

block: convert to pos and nr_sectors accessors

2009-05-11T07:50:54+00:00

With recent cleanups, there is no place where low level driver
directly manipulates request fields.  This means that the 'hard'
request fields always equal the !hard fields.  Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.

While at it, drop superflous blk_rq_pos() < 0 test in swim.c.

[ Impact: use pos and nr_sectors accessors ]

Signed-off-by: Tejun Heo 
Acked-by: Geert Uytterhoeven 
Tested-by: Grant Likely 
Acked-by: Grant Likely 
Tested-by: Adrian McMenamin 
Acked-by: Adrian McMenamin 
Acked-by: Mike Miller 
Cc: James Bottomley 
Cc: Bartlomiej Zolnierkiewicz 
Cc: Borislav Petkov 
Cc: Sergei Shtylyov 
Cc: Eric Moore 
Cc: Alan Stern 
Cc: FUJITA Tomonori 
Cc: Pete Zaitcev 
Cc: Stephen Rothwell 
Cc: Paul Clements 
Cc: Tim Waugh 
Cc: Jeff Garzik 
Cc: Jeremy Fitzhardinge 
Cc: Alex Dubov 
Cc: David Woodhouse 
Cc: Martin Schwidefsky 
Cc: Dario Ballabio 
Cc: David S. Miller 
Cc: Rusty Russell 
Cc: unsik Kim 
Cc: Laurent Vivier 
Signed-off-by: Jens Axboe

dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

2009-04-07T15:31:11+00:00

Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[SCSI] eata: fix the data buffer accessors conversion regression

2008-12-29T17:24:35+00:00

This fixes the regression introduced by the commit
58e2a02eb18393e76a469580fedf7caec190eb5e (eata: convert to use the
data buffer accessors), reported:

http://marc.info/?t=122987621300006&r=1&w=2

- fix DMA_NONE handling in map_dma()

- this driver can't use scsi_dma_map since host->shost_gendev.parent
is not set properly (it uses scsi_register).

Signed-off-by: FUJITA Tomonori 
Reported-by: Arthur Marsh 
Tested-by: Arthur Marsh 
Cc: stable@kernel.org
Signed-off-by: James Bottomley

[SCSI] aha152x, eata, u14-34f: minor irq handler cleanups

2008-04-25T14:52:30+00:00

- remove pointless casts from void*

- remove needless references to 'irq' function argument, when that
  information is already stored somewhere in a driver-private struct.

- where the 'irq' function argument is known never to be used, rename
  it to 'dummy' to make this more obvious

- remove always-false tests for dev_id==NULL

- remove always-true tests for 'irq == host_struct->irq'

- replace per-irq lookup functions and tables with a direct reference
  to data object obtained via 'dev_id' function argument, passed from
  request_irq()

This change's main purpose is to prepare for the patchset in
jgarzik/misc-2.6.git#irq-remove, that explores removal of the
never-used 'irq' argument in each interrupt handler.

Signed-off-by: Jeff Garzik 
Signed-off-by: James Bottomley

[SCSI] remove use_sg_chaining

2008-01-30T19:14:02+00:00

With the sg table code, every SCSI driver is now either chain capable
or broken (or has sg_tablesize set so chaining is never activated), so
there's no need to have a check in the host template.

Also tidy up the code by moving the scatterlist size defines into the
SCSI includes and permit the last entry of the scatterlist pools not
to be a power of two.
Signed-off-by: James Bottomley