linux-toradex.git/drivers/scsi/hosts.c, branch v3.6.1

[SCSI] Fix device removal NULL pointer dereference

2012-07-20T07:58:40+00:00

Use blk_queue_dead() to test whether the queue is dead instead
of !sdev. Since scsi_prep_fn() may be invoked concurrently with
__scsi_remove_device(), keep the queuedata (sdev) pointer in
__scsi_remove_device(). This patch fixes a kernel oops that
can be triggered by USB device removal. See also
http://www.spinics.net/lists/linux-scsi/msg56254.html.

Other changes included in this patch:
- Swap the blk_cleanup_queue() and kfree() calls in
  scsi_host_dev_release() to make that code easier to grasp.
- Remove the queue dead check from scsi_run_queue() since the
  queue state can change anyway at any point in that function
  where the queue lock is not held.
- Remove the queue dead check from the start of scsi_request_fn()
  since it is redundant with the scsi_device_online() check.

Reported-by: Jun'ichi Nomura 
Signed-off-by: Bart Van Assche 
Reviewed-by: Mike Christie 
Reviewed-by: Tejun Heo 
Cc: 
Signed-off-by: James Bottomley

[SCSI] properly initialize atomic_t

2012-07-20T07:58:36+00:00

Initialize atomic_t scsi_host_next_hn and ioerr_cntas per the guidelines
defined in Documentation/atomic_ops.txt

Signed-off-by: Josh Hunt 
Signed-off-by: James Bottomley

[SCSI] fix oops in all legacy host adapters caused by 6f381fa

2012-05-10T07:24:13+00:00

Commit 6f381fa344911d5a234b13574433cf23036f9467
Author: Lin Ming 

[SCSI] scsi_lib: use correct DMA device in __scsi_alloc_queue
 
Caused a regression where we oops in every legacy mode SCSI host driver
because they supply a NULL pointer to scsi_add_host().  Fix this by checking
for the NULL in scsi_add_host_with_dma() and changing the DMA device to being
the platform_bus in that case (which replicates the original behaviour).

Reported-by: Al Viro 
Signed-off-by: James Bottomley

[SCSI] Make scsi_free_queue() kill pending SCSI commands

2011-10-30T09:20:28+00:00

Make sure that SCSI device removal via scsi_remove_host() does finish
all pending SCSI commands. Currently that's not the case and hence
removal of a SCSI host during I/O can cause a deadlock. See also
"blkdev_issue_discard() hangs forever if underlying storage device is
removed" (http://bugzilla.kernel.org/show_bug.cgi?id=40472). See also
http://lkml.org/lkml/2011/8/27/6.

Signed-off-by: Bart Van Assche 
Cc: 
Signed-off-by: James Bottomley

Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6

2010-10-23T02:36:42+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (31 commits)
  driver core: Display error codes when class suspend fails
  Driver core: Add section count to memory_block struct
  Driver core: Add mutex for adding/removing memory blocks
  Driver core: Move find_memory_block routine
  hpilo: Despecificate driver from iLO generation
  driver core: Convert link_mem_sections to use find_memory_block_hinted.
  driver core: Introduce find_memory_block_hinted which utilizes kset_find_obj_hinted.
  kobject: Introduce kset_find_obj_hinted.
  driver core: fix build for CONFIG_BLOCK not enabled
  driver-core: base: change to new flag variable
  sysfs: only access bin file vm_ops with the active lock
  sysfs: Fail bin file mmap if vma close is implemented.
  FW_LOADER: fix kconfig dependency warning on HOTPLUG
  uio: Statically allocate uio_class and use class .dev_attrs.
  uio: Support 2^MINOR_BITS minors
  uio: Cleanup irq handling.
  uio: Don't clear driver data
  uio: Fix lack of locking in init_uio_class
  SYSFS: Allow boot time switching between deprecated and modern sysfs layout
  driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices
  ...

driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices

2010-10-22T17:16:43+00:00

This patch removes the old CONFIG_SYSFS_DEPRECATED_V2 config option,
but it keeps the logic around to handle block devices in the old manner
as some people like to run new kernel versions on old (pre 2007/2008)
distros.

Signed-off-by: Kay Sievers 
Cc: Jens Axboe 
Cc: Stephen Hemminger 
Cc: "Eric W. Biederman" 
Cc: Alan Stern 
Cc: "James E.J. Bottomley" 
Cc: Andrew Morton 
Cc: Alexey Kuznetsov 
Cc: Randy Dunlap 
Cc: Tejun Heo 
Cc: "David S. Miller" 
Cc: Jaroslav Kysela 
Cc: Takashi Iwai 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: David Howells 
Signed-off-by: Greg Kroah-Hartman

block/scsi: Provide a limit on the number of integrity segments

2010-09-10T18:50:10+00:00

Some controllers have a hardware limit on the number of protection
information scatter-gather list segments they can handle.

Introduce a max_integrity_segments limit in the block layer and provide
a new scsi_host_template setting that allows HBA drivers to provide a
value suitable for the hardware.

Add support for honoring the integrity segment limit when merging both
bios and requests.

Signed-off-by: Martin K. Petersen 
Signed-off-by: Jens Axboe

[SCSI] implement runtime Power Management

2010-07-28T14:07:50+00:00

This patch (as1398b) adds runtime PM support to the SCSI layer.  Only
the machanism is provided; use of it is up to the various high-level
drivers, and the patch doesn't change any of them.  Except for sg --
the patch expicitly prevents a device from being runtime-suspended
while its sg device file is open.

The implementation is simplistic.  In general, hosts and targets are
automatically suspended when all their children are asleep, but for
them the runtime-suspend code doesn't actually do anything.  (A host's
runtime PM status is propagated up the device tree, though, so a
runtime-PM-aware lower-level driver could power down the host adapter
hardware at the appropriate times.)  There are comments indicating
where a transport class might be notified or some other hooks added.

LUNs are runtime-suspended by calling the drivers' existing suspend
handlers (and likewise for runtime-resume).  Somewhat arbitrarily, the
implementation delays for 100 ms before suspending an eligible LUN.
This is because there typically are occasions during bootup when the
same device file is opened and closed several times in quick
succession.

The way this all works is that the SCSI core increments a device's
PM-usage count when it is registered.  If a high-level driver does
nothing then the device will not be eligible for runtime-suspend
because of the elevated usage count.  If a high-level driver wants to
use runtime PM then it can call scsi_autopm_put_device() in its probe
routine to decrement the usage count and scsi_autopm_get_device() in
its remove routine to restore the original count.

Hosts, targets, and LUNs are not suspended while they are being probed
or removed, or while the error handler is running.  In fact, a fairly
large part of the patch consists of code to make sure that things
aren't suspended at such times.

[jejb: fix up compile issues in PM config variations]
Signed-off-by: Alan Stern 
Signed-off-by: James Bottomley

[SCSI] scsi:hosts.c Fix warning: variable 'rval' set but not used

2010-07-27T17:03:51+00:00

The below patch fixes a warning message generated by gcc 4.6.0
  CC      drivers/scsi/hosts.o
drivers/scsi/hosts.c: In function 'scsi_host_alloc':
drivers/scsi/hosts.c:328:6: warning: variable 'rval' set but not used

Fix this by removing the rval but placing a printk warning where it
would have been set.

Signed-off-by: Justin P. Mattock 
Signed-off-by: James Bottomley

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo 
Guess-its-ok-by: Christoph Lameter 
Cc: Ingo Molnar 
Cc: Lee Schermerhorn