linux-toradex.git/drivers/scsi/ipr.h, branch v2.6.19-rc2

[SCSI] ipr: Support attaching SATA devices

2006-09-26T16:23:18+00:00

Adds support to attach SATA devices to ipr SAS adapters.

Signed-off-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: Bump driver version to 2.1.4

2006-08-06T20:51:12+00:00

Bump the ipr driver version to 2.1.4.

Signed-off-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: Add some hardware defined types for SATA

2006-08-06T20:49:40+00:00

Add some hardware defined types for SATA. This is required
by future patches to add SATA support to ipr.

Signed-off-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: Bump version

2006-04-13T15:13:30+00:00

Bump ipr driver version to 2.1.3

Signed-off-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: printk macro cleanup/removal

2006-04-13T15:13:29+00:00

Remove some unused printk macros, make some more robust, and
convert some to use standard printk macros when possible.

Signed-off-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: Fixup device type check

2006-04-13T15:13:28+00:00

Fixup a check used by the ipr driver to determine if a given
device is a SCSI disk. Due to the addition of support for
attaching SATA devices, this check needs to be more robust.

Signed-off-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: Disk remove path cleanup

2006-04-13T15:13:28+00:00

Instead of NULLing the resource entry pointer when a disk
goes away to prevent any new commands being sent to it,
set the adapter resource handle to an invalid value so
new ops getting sent to it will fail with a selection timeout
response. This patch is needed for future SATA patches.

Signed-off-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: Fix adapter initialization failure

2006-02-12T17:05:44+00:00

Since scsi core is always sending scatterlists now, remove
some code which was written with the bad assumption that
a small transfer would not be sent down in a scatterlist.
Without this fix, the ipr driver ends up sending garbage
data to the adapter following a reset, causing it to
fail the reset and take the adapter offline.

Signed-off-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: Driver initialization fix for kexec/kdump

2005-12-14T01:10:58+00:00

When kexec booting a kernel when the previous kernel did not
call ipr's shutdown method, the ipr adapter does not get
properly initialized, which can result in the ipr adapter
completing commands issued by the previous kernel. Fix ipr
to detect this scenario by reading the adapter's interrupt
mask register and the microprocessor interrupt register.
If the interrupt mask register indicates that interrupts
are enabled or the reset alert bit is set when the card is
probed, this means the card is in an unknown state and we
hard reset the card.

Signed-off-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: Driver version 2.1.0

2005-11-06T19:13:11+00:00

Bump the driver version.

Signed-off-by: Brian King 
Signed-off-by: James Bottomley