linux-toradex.git/drivers/scsi/libfc/fc_exch.c, branch v3.4.26

[SCSI] libfc: fcoe_transport_create fails in single-CPU environment

2012-03-28T08:33:04+00:00

Starting fcoe fails at fcoe_transport_create when attempting to allocate a
pool of 4K exchanges on a 64-bit single-CPU environment because the call to
__alloc_percpu() is greater than the max of 32K.  This patch reduces the
number of exchanges to fit within the maximum allowed space.

[ Whitespace problems fixed by Robert Love to satisfy chechpatch.pl ]

Signed-off-by: Steven Clark 
Signed-off-by: Robert Love 
Signed-off-by: James Bottomley

[SCSI] libfc: Fix panic in fc_exch_recv

2012-02-19T15:26:07+00:00

Adding and removing the host into the zone causes this panic.

BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
IP: [] fc_exch_recv+0xc57/0xe70 [libfc]
Call Trace:
[] bnx2fc_l2_rcv_thread+0x37b/0x430 [bnx2fc]
[] ? bnx2fc_l2_rcv_thread+0x0/0x430 [bnx2fc]
[] kthread+0x96/0xa0
[] child_rip+0xa/0x20
[] ? kthread+0x0/0xa0
[] ? child_rip+0x0/0x20

During fc_exch_reset, the active exchanges are aborted and the exch is deleted.
As part of processing ABTS response, due to 'ep' being NULL, any access to ep in
fc_exch_recv_bls() causes this panic. Fixed to access 'ep' only if non-NULL.

Reviewed-by: Neerav Parikh 
Signed-off-by: Bhanu Prakash Gollapudi 
Signed-off-by: Robert Love 
Signed-off-by: James Bottomley

[SCSI] libfc: Declare local functions static

2012-01-16T08:45:48+00:00

Avoid that sparse complains about missing declarations for local
functions by declaring these static or by adding an #include directive.
Add the __percpu annotation where it is missing.

Signed-off-by: Bart Van Assche 
Reviewed-by: Yi Zou 
Signed-off-by: Robert Love 
Signed-off-by: James Bottomley

Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2011-11-07T03:44:47+00:00

* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include 
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include 
  net: sch_generic remove redundant use of 
  net: inet_timewait_sock doesnt need 
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h

scsi: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required

2011-10-31T23:31:23+00:00

For the basic SCSI infrastructure files that are exporting symbols
but not modules themselves, add in the basic export.h header file
to allow the exports.

Signed-off-by: Paul Gortmaker

[SCSI] libfc: avoid exchanges collision during lport reset

2011-10-31T09:27:19+00:00

Currently timer delay is large and is using msleep to avoid
avoid exchanges collision across lport reset, so instead
do this by initializing exches pool indexes during
reset also.

Signed-off-by: Vasu Dev 
Tested-by: Bhanu Prakash Gollapudi 
Signed-off-by: Yi Zou 
Signed-off-by: James Bottomley

[SCSI] libfc: fix checking FC_TYPE_BLS

2011-10-31T09:26:44+00:00

Its checked after skb freed, so instead have fh_type
cached and then check FC_TYPE_BLS against cached
fh_type value.

This wrong check was causing double exch locking as
reported by Bhanu at
https://lists.open-fcoe.org/pipermail/devel/2011-October/011793.html

Signed-off-by: Vasu Dev 
Tested-by: Bhanu Prakash Gollapudi 
Signed-off-by: Yi Zou 
Signed-off-by: James Bottomley

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

2011-10-28T23:44:18+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits)
  [SCSI] qla4xxx: export address/port of connection (fix udev disk names)
  [SCSI] ipr: Fix BUG on adapter dump timeout
  [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer
  [SCSI] hpsa: change confusing message to be more clear
  [SCSI] iscsi class: fix vlan configuration
  [SCSI] qla4xxx: fix data alignment and use nl helpers
  [SCSI] iscsi class: fix link local mispelling
  [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA
  [SCSI] aacraid: use lower snprintf() limit
  [SCSI] lpfc 8.3.27: Change driver version to 8.3.27
  [SCSI] lpfc 8.3.27: T10 additions for SLI4
  [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery
  [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name
  [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout
  [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes
  [SCSI] megaraid_sas: Changelog and version update
  [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic
  [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support
  [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers
  [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts
  ...

[SCSI] libfc: cache align fc_exch_pool

2011-10-02T17:56:50+00:00

fix holes and better cache aligned fields.

Signed-off-by: Vasu Dev 
Tested-by: Ross Brattain 
Signed-off-by: Yi Zou 
Signed-off-by: James Bottomley

[SCSI] libfc: fix referencing to fc_fcp_pkt from the frame pointer via fr_fsp()

2011-08-29T02:40:30+00:00

In commit 6a716a8, while releasing the DDP context in case frame_send() failed,
the frame may already be freed, so we should store the pointer to fc_fcp_pkt and
release the DDP context using the locally stored fsp instead of getting fsp from
the fr_fsp(fp) on a frame.

Signed-off-by: Yi Zou 
Reported-by: Bhanu Prakash Gollapudi 
Tested-by: Ross Brattain 
Signed-off-by: Robert Love 
Signed-off-by: James Bottomley