linux-toradex.git/drivers/scsi/libsas, branch tegra Linux kernel for Apalis and Colibri modules libsas: set sas_address and device type of rphy 2011-11-11T17:42:30+00:00 Jack Wang jack_wang@usish.com 2011-09-23T06:32:32+00:00 0c70e4fdd745b267179f8a9d3d03c656dfb251dc commit bb041a0e9c31229071b6e56e1d0d8374af0d2038 upstream. Libsas forget to set the sas_address and device type of rphy lead to file under /sys/class/sas_x show wrong value, fix that. Signed-off-by: Jack Wang <jack_wang@usish.com> Tested-by: Crystal Yu <crystal_yu@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit bb041a0e9c31229071b6e56e1d0d8374af0d2038 upstream.

Libsas forget to set the sas_address and device type of rphy lead to file
under /sys/class/sas_x show wrong value, fix that.

Signed-off-by: Jack Wang <jack_wang@usish.com>
Tested-by: Crystal Yu <crystal_yu@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[SCSI] libsas: fix panic when single phy is disabled on a wide port 2011-10-02T18:28:55+00:00 Mark Salyzyn mark_salyzyn@us.xyratex.com 2011-09-22T15:32:23+00:00 a73914c35b05d80f8ce78288e10056c91090b666 When a wide port is being utilized to a target, if one disables only one of the phys, we get an OS crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000238 IP: [<ffffffff814ca9b1>] mutex_lock+0x21/0x50 PGD 4103f5067 PUD 41dba9067 PMD 0 Oops: 0002 [#1] SMP last sysfs file: /sys/bus/pci/slots/5/address CPU 0 Modules linked in: pm8001(U) ses enclosure fuse nfsd exportfs autofs4 ipmi_devintf ipmi_si ipmi_msghandler nfs lockd fscache nfs_acl auth_rpcgss 8021q fcoe libfcoe garp libfc scsi_transport_fc stp scsi_tgt llc sunrpc cpufreq_ondemand acpi_cpufreq freq_table ipv6 sr_mod cdrom dm_mirror dm_region_hash dm_log uinput sg i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support e1000e mlx4_ib ib_mad ib_core mlx4_en mlx4_core ext3 jbd mbcache sd_mod crc_t10dif usb_storage ata_generic pata_acpi ata_piix libsas(U) scsi_transport_sas dm_mod [last unloaded: pm8001] Modules linked in: pm8001(U) ses enclosure fuse nfsd exportfs autofs4 ipmi_devintf ipmi_si ipmi_msghandler nfs lockd fscache nfs_acl auth_rpcgss 8021q fcoe libfcoe garp libfc scsi_transport_fc stp scsi_tgt llc sunrpc cpufreq_ondemand acpi_cpufreq freq_table ipv6 sr_mod cdrom dm_mirror dm_region_hash dm_log uinput sg i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support e1000e mlx4_ib ib_mad ib_core mlx4_en mlx4_core ext3 jbd mbcache sd_mod crc_t10dif usb_storage ata_generic pata_acpi ata_piix libsas(U) scsi_transport_sas dm_mod [last unloaded: pm8001] Pid: 5146, comm: scsi_wq_5 Not tainted 2.6.32-71.29.1.el6.lustre.7.x86_64 #1 Storage Server RIP: 0010:[<ffffffff814ca9b1>] [<ffffffff814ca9b1>] mutex_lock+0x21/0x50 RSP: 0018:ffff8803e4e33d30 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000238 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff8803e664c800 RDI: 0000000000000238 RBP: ffff8803e4e33d40 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000238 R14: ffff88041acb7200 R15: ffff88041c51ada0 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000238 CR3: 0000000410143000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process scsi_wq_5 (pid: 5146, threadinfo ffff8803e4e32000, task ffff8803e4e294a0) Stack: ffff8803e664c800 0000000000000000 ffff8803e4e33d70 ffffffffa001f06e <0> ffff8803e4e33d60 ffff88041c51ada0 ffff88041acb7200 ffff88041bc0aa00 <0> ffff8803e4e33d90 ffffffffa0032b6c 0000000000000014 ffff88041acb7200 Call Trace: [<ffffffffa001f06e>] sas_port_delete_phy+0x2e/0xa0 [scsi_transport_sas] [<ffffffffa0032b6c>] sas_unregister_devs_sas_addr+0xac/0xe0 [libsas] [<ffffffffa0034914>] sas_ex_revalidate_domain+0x204/0x330 [libsas] [<ffffffffa00307f0>] ? sas_revalidate_domain+0x0/0x90 [libsas] [<ffffffffa0030855>] sas_revalidate_domain+0x65/0x90 [libsas] [<ffffffff8108c7d0>] worker_thread+0x170/0x2a0 [<ffffffff81091ea0>] ? autoremove_wake_function+0x0/0x40 [<ffffffff8108c660>] ? worker_thread+0x0/0x2a0 [<ffffffff81091b36>] kthread+0x96/0xa0 [<ffffffff810141ca>] child_rip+0xa/0x20 [<ffffffff81091aa0>] ? kthread+0x0/0xa0 [<ffffffff810141c0>] ? child_rip+0x0/0x20 Code: ff ff 85 c0 75 ed eb d6 66 90 55 48 89 e5 48 83 ec 10 48 89 1c 24 4c 89 64 24 08 0f 1f 44 00 00 48 89 fb e8 92 f4 ff ff 48 89 df <f0> ff 0f 79 05 e8 25 00 00 00 65 48 8b 04 25 08 cc 00 00 48 2d RIP [<ffffffff814ca9b1>] mutex_lock+0x21/0x50 RSP <ffff8803e4e33d30> CR2: 0000000000000238 The following patch is admittedly a band-aid, and does not solve the root cause, but it still is a good candidate for hardening as a pointer check before reference. Signed-off-by: Mark Salyzyn <mark_salyzyn@us.xyratex.com> Tested-by: Jack Wang <jack_wang@usish.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
When a wide port is being utilized to a target, if one disables only one
of the
phys, we get an OS crash:

BUG: unable to handle kernel NULL pointer dereference at
0000000000000238
IP: [<ffffffff814ca9b1>] mutex_lock+0x21/0x50
PGD 4103f5067 PUD 41dba9067 PMD 0
Oops: 0002 [#1] SMP
last sysfs file: /sys/bus/pci/slots/5/address
CPU 0
Modules linked in: pm8001(U) ses enclosure fuse nfsd exportfs autofs4
ipmi_devintf ipmi_si ipmi_msghandler nfs lockd fscache nfs_acl
auth_rpcgss 8021q fcoe libfcoe garp libfc scsi_transport_fc stp scsi_tgt
llc sunrpc cpufreq_ondemand acpi_cpufreq freq_table ipv6 sr_mod cdrom
dm_mirror dm_region_hash dm_log uinput sg i2c_i801 i2c_core iTCO_wdt
iTCO_vendor_support e1000e mlx4_ib ib_mad ib_core mlx4_en mlx4_core ext3
jbd mbcache sd_mod crc_t10dif usb_storage ata_generic pata_acpi ata_piix
libsas(U) scsi_transport_sas dm_mod [last unloaded: pm8001]

Modules linked in: pm8001(U) ses enclosure fuse nfsd exportfs autofs4
ipmi_devintf ipmi_si ipmi_msghandler nfs lockd fscache nfs_acl
auth_rpcgss 8021q fcoe libfcoe garp libfc scsi_transport_fc stp scsi_tgt
llc sunrpc cpufreq_ondemand acpi_cpufreq freq_table ipv6 sr_mod cdrom
dm_mirror dm_region_hash dm_log uinput sg i2c_i801 i2c_core iTCO_wdt
iTCO_vendor_support e1000e mlx4_ib ib_mad ib_core mlx4_en mlx4_core ext3
jbd mbcache sd_mod crc_t10dif usb_storage ata_generic pata_acpi ata_piix
libsas(U) scsi_transport_sas dm_mod [last unloaded: pm8001]
Pid: 5146, comm: scsi_wq_5 Not tainted
2.6.32-71.29.1.el6.lustre.7.x86_64 #1 Storage Server
RIP: 0010:[<ffffffff814ca9b1>]  [<ffffffff814ca9b1>]
mutex_lock+0x21/0x50
RSP: 0018:ffff8803e4e33d30  EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000238 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8803e664c800 RDI: 0000000000000238
RBP: ffff8803e4e33d40 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000238 R14: ffff88041acb7200 R15: ffff88041c51ada0
FS:  0000000000000000(0000) GS:ffff880028200000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000238 CR3: 0000000410143000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process scsi_wq_5 (pid: 5146, threadinfo ffff8803e4e32000, task
ffff8803e4e294a0)
Stack:
 ffff8803e664c800 0000000000000000 ffff8803e4e33d70 ffffffffa001f06e
<0> ffff8803e4e33d60 ffff88041c51ada0 ffff88041acb7200 ffff88041bc0aa00
<0> ffff8803e4e33d90 ffffffffa0032b6c 0000000000000014 ffff88041acb7200
Call Trace:
 [<ffffffffa001f06e>] sas_port_delete_phy+0x2e/0xa0 [scsi_transport_sas]
 [<ffffffffa0032b6c>] sas_unregister_devs_sas_addr+0xac/0xe0 [libsas]
 [<ffffffffa0034914>] sas_ex_revalidate_domain+0x204/0x330 [libsas]
 [<ffffffffa00307f0>] ? sas_revalidate_domain+0x0/0x90 [libsas]
 [<ffffffffa0030855>] sas_revalidate_domain+0x65/0x90 [libsas]
 [<ffffffff8108c7d0>] worker_thread+0x170/0x2a0
 [<ffffffff81091ea0>] ? autoremove_wake_function+0x0/0x40
 [<ffffffff8108c660>] ? worker_thread+0x0/0x2a0
 [<ffffffff81091b36>] kthread+0x96/0xa0
 [<ffffffff810141ca>] child_rip+0xa/0x20
 [<ffffffff81091aa0>] ? kthread+0x0/0xa0
 [<ffffffff810141c0>] ? child_rip+0x0/0x20
Code: ff ff 85 c0 75 ed eb d6 66 90 55 48 89 e5 48 83 ec 10 48 89 1c 24
4c 89 64 24 08 0f 1f 44 00 00 48 89 fb e8 92 f4 ff ff 48 89 df <f0> ff
0f 79 05 e8 25 00 00 00 65 48 8b 04 25 08 cc 00 00 48 2d
RIP  [<ffffffff814ca9b1>] mutex_lock+0x21/0x50
 RSP <ffff8803e4e33d30>
CR2: 0000000000000238

The following patch is admittedly a band-aid, and does not solve the
root cause, but it still is a good candidate for hardening as a pointer
check before reference.

Signed-off-by: Mark Salyzyn <mark_salyzyn@us.xyratex.com>
Tested-by: Jack Wang <jack_wang@usish.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] libsas: fix failure to revalidate domain for anything but the first expander child. 2011-09-22T07:23:56+00:00 Mark Salyzyn mark_salyzyn@us.xyratex.com 2011-09-01T13:11:17+00:00 24926dadc41cc566e974022b0e66231b82c6375f In an enclosure model where there are chaining expanders to a large body of storage, it was discovered that libsas, responding to a broadcast event change, would only revalidate the domain of first child expander in the list. The issue is that the pointer value to the discovered source device was used to break out of the loop, rather than the content of the pointer. This still remains non-compliant as the revalidate domain code is supposed to loop through all child expanders, and not stop at the first one it finds that reports a change count. However, the design of this routine does not allow multiple device discoveries and that would be a more complicated set of patches reserved for another day. We are fixing the glaring bug rather than refactoring the code. Signed-off-by: Mark Salyzyn <msalyzyn@us.xyratex.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
In an enclosure model where there are chaining expanders to a large body
of storage, it was discovered that libsas, responding to a broadcast
event change, would only revalidate the domain of first child expander
in the list.

The issue is that the pointer value to the discovered source device was
used to break out of the loop, rather than the content of the pointer.

This still remains non-compliant as the revalidate domain code is
supposed to loop through all child expanders, and not stop at the first
one it finds that reports a change count. However, the design of this
routine does not allow multiple device discoveries and that would be a
more complicated set of patches reserved for another day. We are fixing
the glaring bug rather than refactoring the code.

Signed-off-by: Mark Salyzyn <msalyzyn@us.xyratex.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] libsas: remove expander from dev list on error 2011-07-27T11:50:58+00:00 Luben Tuikov ltuikov@yahoo.com 2011-07-27T06:10:48+00:00 5911e963d3718e306bcac387b83e259aa4228896 If expander discovery fails (sas_discover_expander()), remove the expander from the port device list (sas_ex_discover_expander()), before freeing it. Else the list is corrupted and, e.g., when we attempt to send SMP commands to other devices, the kernel oopses. Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Cc: stable@kernel.org Reviewed-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
If expander discovery fails (sas_discover_expander()), remove the
expander from the port device list (sas_ex_discover_expander()),
before freeing it. Else the list is corrupted and, e.g., when we
attempt to send SMP commands to other devices, the kernel oopses.

Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Cc: stable@kernel.org
Reviewed-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] libsas: Add option for SATA soft reset 2011-05-27T03:49:33+00:00 Dave Jiang dave.jiang@intel.com 2011-05-24T20:18:04+00:00 1ca1e43e55f4cd068f997154ffaf5fa62b08b802 This allows a libsas driver to optionally provide a soft reset handler for libata to drive. The isci driver allows software to control the assertion/deassertion of SRST. [jejb: checkpatch.pl fixes] Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> 
This allows a libsas driver to optionally provide a soft reset handler
for libata to drive.  The isci driver allows software to control the
assertion/deassertion of SRST.

[jejb: checkpatch.pl fixes]
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
[SCSI] libsas: check dev->gone before submitting sata i/o 2011-05-27T03:49:33+00:00 Dan Williams dan.j.williams@intel.com 2011-05-24T20:17:58+00:00 3673f4bf6a277f4f2944ad153ceb167b340f9ffc Head off doomed-to-fail i/o in sas_queuecommand before sending it down the ata path. Before: sd 7:0:0:0: [sdd] Synchronizing SCSI cache ata8: no sense translation for status: 0x00 ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00 ata8.00: device reported invalid CHS sector 0 ata8: status=0x00 { } ata8: no sense translation for status: 0x00 ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00 ata8.00: device reported invalid CHS sector 0 ata8: status=0x00 { } ata8: no sense translation for status: 0x00 ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00 ata8.00: device reported invalid CHS sector 0 ata8: status=0x00 { } sd 7:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 7:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor] sd 7:0:0:0: [sdd] Add. Sense: No additional sense information sd 7:0:0:0: [sdd] Stopping disk After: sd 9:0:0:0: [sdd] Synchronizing SCSI cache sd 9:0:0:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 9:0:0:0: [sdd] Stopping disk sd 9:0:0:0: [sdd] START_STOP FAILED sd 9:0:0:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK This is a cosmetic change as sata i/o can still leak to a gone device, but this addresses the nominal hotplug case when releasing the target. Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> 
Head off doomed-to-fail i/o in sas_queuecommand before sending it down
the ata path.

Before:
sd 7:0:0:0: [sdd] Synchronizing SCSI cache
ata8: no sense translation for status: 0x00
ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata8.00: device reported invalid CHS sector 0
ata8: status=0x00 { }
ata8: no sense translation for status: 0x00
ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata8.00: device reported invalid CHS sector 0
ata8: status=0x00 { }
ata8: no sense translation for status: 0x00
ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata8.00: device reported invalid CHS sector 0
ata8: status=0x00 { }
sd 7:0:0:0: [sdd]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sdd]  Sense Key : Aborted Command [current] [descriptor]
sd 7:0:0:0: [sdd]  Add. Sense: No additional sense information
sd 7:0:0:0: [sdd] Stopping disk

After:
sd 9:0:0:0: [sdd] Synchronizing SCSI cache
sd 9:0:0:0: [sdd]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 9:0:0:0: [sdd] Stopping disk
sd 9:0:0:0: [sdd] START_STOP FAILED
sd 9:0:0:0: [sdd]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

This is a cosmetic change as sata i/o can still leak to a gone device,
but this addresses the nominal hotplug case when releasing the target.

Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
[SCSI] libsas: fix/amend device gone notification in sas_deform_port() 2011-05-27T03:49:32+00:00 Dan Williams dan.j.williams@intel.com 2011-05-24T20:17:53+00:00 90f1e10d08bad84f8fd15d3469a60d437d4de64f Commit 56dd2c06 "libsas: Don't issue commands to devices that have been hot-removed" edited Darrick's original patch to remove setting 'gone' in the sas_deform_port() path because that prevented scsi sync cache commands from being issued when the driver was unloaded. However, this allows true device gone notifications (as signaled port phy events) to trigger sync cache commands to devices that are known to be unreachable. Teach libsas which sas_deform_port() invocations are likely device gone events. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> 
Commit 56dd2c06 "libsas: Don't issue commands to devices that have been
hot-removed" edited Darrick's original patch to remove setting 'gone' in
the sas_deform_port() path because that prevented scsi sync cache
commands from being issued when the driver was unloaded.  However, this
allows true device gone notifications (as signaled port phy events) to
trigger sync cache commands to devices that are known to be unreachable.

Teach libsas which sas_deform_port() invocations are likely device gone
events.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
[SCSI] libsas: fix SATA NCQ error 2011-05-24T16:34:01+00:00 Xiangliang Yu yuxiangl@marvell.com 2011-05-08T11:27:01+00:00 bb650a1bef73a8c1fd076fae4c4f0701cf3b5f25 Current version of libsas can not handle SATA NCQ error. This patch handle SATA NCQ error as AHCI do. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> 
Current version of libsas can not handle SATA NCQ error.
This patch handle SATA NCQ error as AHCI do.

Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Fix common misspellings 2011-03-31T14:26:23+00:00 Lucas De Marchi lucas.demarchi@profusion.mobi 2011-03-31T01:57:33+00:00 25985edcedea6396277003854657b5f3cb31a628 Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> 
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 2011-03-21T01:14:55+00:00 Linus Torvalds torvalds@linux-foundation.org 2011-03-21T01:14:55+00:00 a44f99c7efdb88fa41128065c9a9445c19894e34 * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits) video: change to new flag variable scsi: change to new flag variable rtc: change to new flag variable rapidio: change to new flag variable pps: change to new flag variable net: change to new flag variable misc: change to new flag variable message: change to new flag variable memstick: change to new flag variable isdn: change to new flag variable ieee802154: change to new flag variable ide: change to new flag variable hwmon: change to new flag variable dma: change to new flag variable char: change to new flag variable fs: change to new flag variable xtensa: change to new flag variable um: change to new flag variables s390: change to new flag variable mips: change to new flag variable ... Fix up trivial conflict in drivers/hwmon/Makefile 
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
  video: change to new flag variable
  scsi: change to new flag variable
  rtc: change to new flag variable
  rapidio: change to new flag variable
  pps: change to new flag variable
  net: change to new flag variable
  misc: change to new flag variable
  message: change to new flag variable
  memstick: change to new flag variable
  isdn: change to new flag variable
  ieee802154: change to new flag variable
  ide: change to new flag variable
  hwmon: change to new flag variable
  dma: change to new flag variable
  char: change to new flag variable
  fs: change to new flag variable
  xtensa: change to new flag variable
  um: change to new flag variables
  s390: change to new flag variable
  mips: change to new flag variable
  ...

Fix up trivial conflict in drivers/hwmon/Makefile