linux-toradex.git/drivers/scsi/lpfc/lpfc_logmsg.h, branch v4.4.73

[SCSI] lpfc 8.3.39: Fixed BlockGuard error reporting

2013-05-02T19:38:02+00:00

Signed-off-by: James Smart 
Signed-off-by: James Bottomley

[SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes

2011-10-16T16:28:48+00:00

Miscellanous logic and interface fixes

- Fix lpfc_init_vfi_cmpl to check the interface type for interface type 0
  before parsing the results.
- Cast uint32_t values that are multiplied to uint64_t before the
  multiplication.
- Instead of "break" statement when PCI read returned error, use the goto
  statement to the end of the routine after setting return value
- moved the msleep(10) to the beginning of the wait loop for checking the
  SLIPort_Status register
- Added the code to follow the existing wait for SLIPort_Status register RDY,
  ERR, and RN bits to be set by the port before proceeding to perform PCI
  function reset.
- Do not override ulpCt_h and ulpCt_l for SLI 4 ports.
- For vport delete, call lpfc_nlp_put when the vport's vpi state is not
  marked with VPI_REGISTERED.
- Added missed fields into the driver's Controller Attributes Structure
- Changed ringing EQ/CQ/RQ doorbell register to be dependent on the size
  of the queue.
- Return -EACCES in issue_reset if cfg_enable_hba_reset is zero.
- Added new logging flag LOG_FCP_UNDER 0x00040000 to qualify underrun logging.
- Add a check in the fabric name display routine to display 0 if the port
  state is <= FLOGI.
- Add a check to the switch statement in lpfc_decode_firmware_rev to check
  for an 'X'.

Signed-off-by: Alex Iannicelli 
Signed-off-by: James Smart 
Signed-off-by: James Bottomley

[SCSI] lpfc 8.3.19: Fix critical errors and crashes

2010-12-21T18:23:58+00:00

Fix critical errors and crashes

- Replace LOF_SECURITY with LOG_SECURITY
- When calculating diag test memory size, use full size with header.
- Return LS_RJT with status=UNSUPPORTED on unrecognized ELS's
- Correct NULL pointer dereference when lpfc_create_vport_work_array()
  returns NULL.
- Added code to handle CVL when port is in LPFC_VPORT_FAILED state.
- In lpfc_do_scr_ns_plogi, check the nodelist for FDMI_DID and reuse
  the resource.
- Check for generic request 64 and calculate the sgl offset for the request
  and reply sgls, also calculate the xmit length using only the request bde.

Signed-off-by: Alex Iannicelli 
Signed-off-by: James Smart 
Signed-off-by: James Bottomley

[SCSI] lpfc 8.3.10: Added round robin FCF failover

2010-03-03T13:40:09+00:00

- Added round robin FCF failover on initial or FCF rediscovery FLOGI failure.

Signed-off-by: James Smart 
Signed-off-by: James Bottomley

[SCSI] lpfc 8.3.2 : Miscellaneous Changes

2009-06-08T16:26:01+00:00

Miscellaneous Changes:
- Convert from SLI2_ACTIVE flag to more correct SLI_ACTIVE (generic) flag
- Reposition log verbose messaging definitions
- Update naming for vpi object name from vport slang name
- Handle deferred error attention condition
- Add 10G link support
- Small bug fixup

Signed-off-by: James Smart 
Signed-off-by: James Bottomley

[SCSI] lpfc 8.3.2 : Update of copyrights

2009-06-08T16:25:43+00:00

Update of copyrights on modified files

Signed-off-by: James Smart 
Signed-off-by: James Bottomley

[SCSI] lpfc 8.3.1: misc fixes/changes

2009-04-27T14:42:47+00:00

8.3.1 Fixes/Changes :

- Fix incorrect byte-swapping on word 4 of IOCB (data length) which
  caused LUNs to not be discovered on big-endian (e.g. PPC)

- Remove a bad cast of MBslimaddr which loses the __iomem (sparse)

- Make lpfc_debugfs_mask_disc_trc static (sparse)

- Correct misspelled word BlockGuard in lpfc_logmsg.h comment

- Replaced repeated code segment for canceling IOCBs from a list with
  a function call, lpfc_sli_cancel_iocbs().

- Increased HBQ buffers to support 40KB SSC sequences.

- Added sysfs interface to update speed and topology parameter without
  link bounce.

- Fixed bug with sysfs fc_host WWNs not being updated after changing
  the WWNs.

- Check if the active mailbox is NULL in the beginning of the mailbox
  timeout handler - fixes panic in the mailbox timeout handler while
  running IO stress test

- Fixed system panic in lpfc_pci_remove_one() due to ndlp indirect
  reference to phba through vport

- Removed de-reference of scsi device after call to scsi_done() to fix
  panic in scsi completion path while accessing scsi device after
  scsi_done is called.

- Fixed "Nodelist not empty" message when unloading the driver after
  target reboot test

- Added LP2105 HBA model description

- Added code to print all 16 words of unrecognized ASYNC events

- Fixed memory leak in vport create + delete loop

- Added support for handling dual error bit from HBA

- Fixed a driver NULL pointer dereference in lpfc_sli_process_sol_iocb

- Fixed a discovery bug with FC switch reboot in lpfc_setup_disc_node

- Take NULL termintator into account when calculating available buffer space

Signed-off-by: James Smart 
Signed-off-by: James Bottomley

[SCSI] lpfc 8.3.0 : Add BlockGuard support (T10-DIF) structs and defs

2008-12-29T17:24:27+00:00

Update struct definitions, #defines, sysfs entries, and initialization
to support BlockGuard.

Signed-off-by: James Smart 
Signed-off-by: James Bottomley

[SCSI] lpfc 8.2.5 : Miscellaneous discovery Fixes

2008-02-11T23:52:58+00:00

Miscellaneous discovery fixes:
- Flush RSCN buffers on vports when reseting HBA.
- Fix incorrect FLOGI after vport reg failed
- Fix a potential fabric ELS race condition
- Fix handling of failed PLOGI command under high lip rates
- Fix FDISC handling
- Fix debug logging for npiv handling

Signed-off-by: James Smart 
Signed-off-by: James Bottomley

[SCSI] lpfc 8.2.3 : Added support for ASICs that report temperature

2008-01-12T00:22:31+00:00

Added support for ASICs that report temperature. Temperature notices are
 reported as events and logged. Temperature can be read via sysfs.

Signed-off-by: James Smart 
Signed-off-by: James Bottomley