linux-toradex.git/drivers/scsi/mpt2sas, branch v3.4.107 Linux kernel for Apalis and Colibri modules mpt2sas: Fix for issue Missing delay not getting set during system bootup 2014-06-11T19:04:20+00:00 Reddy, Sreekanth Sreekanth.Reddy@lsi.com 2013-02-26T11:29:59+00:00 0bf3ffd5075b92bf04975c18a44baceab06a848d commit 93cfcb8c998e3fe2c075fa61ab28f7b018e5049a upstream. commit b0df96a0068daee4f9c2189c29b9053eb6e46b17 upstream. Missing delay is not getting set properly. The reason is that it is not defined in the same file from where it is being invoked. The fix is to move the missing delay module parameter from mpt2sas_base.c to mpt2sas_scsh.c. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Rui Xiang <rui.xiang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 93cfcb8c998e3fe2c075fa61ab28f7b018e5049a upstream.

commit b0df96a0068daee4f9c2189c29b9053eb6e46b17 upstream.

Missing delay is not getting set properly. The reason is that it is not
defined in the same file from where it is being invoked.  The fix is to move
the missing delay module parameter from mpt2sas_base.c to mpt2sas_scsh.c.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mpt2sas: Fix for device scan following host reset could get stuck in a infinite loop 2014-06-11T19:04:20+00:00 Sreekanth Reddy Sreekanth.Reddy@lsi.com 2013-02-01T19:26:18+00:00 ce7035a6fdded27ad961445f6796a57b9bef04bf commit 6241f22ca12a26ee149cbe31b27bac97dbdc8bc4 upstream. Modified device scan routine so each configuration page read breaks from the while loop when the ioc_status is not equal to MPI2_IOCSTATUS_SUCCESS. [jejb: checkpatch fixes] Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> [bwh: Backported to 3.2; adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Rui Xiang <rui.xiang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6241f22ca12a26ee149cbe31b27bac97dbdc8bc4 upstream.

Modified device scan routine so each configuration page read breaks from the
while loop when the ioc_status is not equal to MPI2_IOCSTATUS_SUCCESS.

[jejb: checkpatch fixes]
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[bwh: Backported to 3.2; adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mpt2sas: Don't disable device twice at suspend. 2014-05-13T12:11:30+00:00 Tyler Stachecki tstache1@binghamton.edu 2014-04-25T20:41:04+00:00 a2295c4263fe35f674f0061fe0419c73238d5b5b commit af61e27c3f77c7623b5335590ae24b6a5c323e22 upstream. On suspend, _scsih_suspend calls mpt2sas_base_free_resources, which in turn calls pci_disable_device if the device is enabled prior to suspending. However, _scsih_suspend also calls pci_disable_device itself. Thus, in the event that the device is enabled prior to suspending, pci_disable_device will be called twice. This patch removes the duplicate call to pci_disable_device in _scsi_suspend as it is both unnecessary and results in a kernel oops. Signed-off-by: Tyler Stachecki <tstache1@binghamton.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit af61e27c3f77c7623b5335590ae24b6a5c323e22 upstream.

On suspend, _scsih_suspend calls mpt2sas_base_free_resources, which
in turn calls pci_disable_device if the device is enabled prior to
suspending. However, _scsih_suspend also calls pci_disable_device
itself.

Thus, in the event that the device is enabled prior to suspending,
pci_disable_device will be called twice. This patch removes the
duplicate call to pci_disable_device in _scsi_suspend as it is both
unnecessary and results in a kernel oops.

Signed-off-by: Tyler Stachecki <tstache1@binghamton.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SCSI: mpt2sas: fix firmware failure with wrong task attribute 2013-07-28T23:25:47+00:00 Sreekanth Reddy Sreekanth.Reddy@lsi.com 2013-02-01T19:28:20+00:00 39d2dd53da0ef0be782387f79fe6bfefc0808629 commit 48ba2efc382f94fae16ca8ca011e5961a81ad1ea upstream. When SCSI command is received with task attribute not set, set it to SIMPLE. Previously it is set to untagged. This causes the firmware to fail the commands. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 48ba2efc382f94fae16ca8ca011e5961a81ad1ea upstream.

When SCSI command is received with task attribute not set, set it to SIMPLE.
Previously it is set to untagged. This causes the firmware to fail the commands.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SCSI: mpt2sas: Fix for issue - Unable to boot from the drive connected to HBA 2012-10-02T17:30:07+00:00 sreekanth.reddy@lsi.com sreekanth.reddy@lsi.com 2012-08-22T11:25:13+00:00 d39bdd32d086d55a4adf228a0af2874ee489cd61 commit 10cce6d8b5af0b32bc4254ae4a28423a74c0921c upstream. This patch checks whether HBA is SAS2008 B0 controller. if it is a SAS2008 B0 controller then it use IO-APIC interrupt instead of MSIX, as SAS2008 B0 controller doesn't support MSIX interrupts. [jejb: fix whitespace problems] Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 10cce6d8b5af0b32bc4254ae4a28423a74c0921c upstream.

This patch checks whether HBA is SAS2008 B0 controller.
if it is a SAS2008 B0 controller then it use IO-APIC interrupt instead of MSIX,
as SAS2008 B0 controller doesn't support MSIX interrupts.

[jejb: fix whitespace problems]
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SCSI: mpt2sas: Fix for Driver oops, when loading driver with max_queue_depth command line option to a very small value 2012-09-14T17:00:25+00:00 sreekanth.reddy@lsi.com sreekanth.reddy@lsi.com 2012-07-17T10:27:05+00:00 7a4601c0bfde4ed50c54f30c32c5677e3daec4f9 commit 338b131a3269881c7431234855c93c219b0979b6 upstream. If the specified max_queue_depth setting is less than the expected number of internal commands, then driver will calculate the queue depth size to a negitive number. This negitive number is actually a very large number because variable is unsigned 16bit integer. So, the driver will ask for a very large amount of memory for message frames and resulting into oops as memory allocation routines will not able to handle such a large request. So, in order to limit this kind of oops, The driver need to set the max_queue_depth to a scsi mid layer's can_queue value. Then the overall message frames required for IO is minimum of either (max_queue_depth plus internal commands) or the IOC global credits. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 338b131a3269881c7431234855c93c219b0979b6 upstream.

If the specified max_queue_depth setting is less than the
expected number of internal commands, then driver will calculate
the queue depth size to a negitive number. This negitive number
is actually a very large number because variable is unsigned
16bit integer. So, the driver will ask for a very large amount of
memory for message frames and resulting into oops as memory
allocation routines will not able to handle such a large request.

So, in order to limit this kind of oops, The driver need to set
the max_queue_depth to a scsi mid layer's can_queue value. Then
the overall message frames required for IO is minimum of either
(max_queue_depth plus internal commands) or the IOC global
credits.

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SCSI: mpt2sas: Fix unsafe using smp_processor_id() in preemptible 2012-06-22T18:36:55+00:00 nagalakshmi.nandigama@lsi.com nagalakshmi.nandigama@lsi.com 2012-04-17T05:55:04+00:00 696615b7f9872cf81a840cde982775c521f56ea3 commit a2c658505bf5c75516ee0a79287223e86a2474af upstream. When CONFIG_DEBUG_PREEMPT is enabled, bug is observed in the smp_processor_id(). This is because smp_processor_id() is not called in preempt safe condition. To fix this issue, use raw_smp_processor_id instead of smp_processor_id. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a2c658505bf5c75516ee0a79287223e86a2474af upstream.

When CONFIG_DEBUG_PREEMPT is enabled, bug is observed in the smp_processor_id().
This is because smp_processor_id() is not called in preempt safe condition.

To fix this issue, use raw_smp_processor_id instead of smp_processor_id.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SCSI: mpt2sas: Fix for panic happening because of improper memory allocation 2012-06-01T07:18:15+00:00 nagalakshmi.nandigama@lsi.com nagalakshmi.nandigama@lsi.com 2012-03-20T06:40:01+00:00 3102e700882480237273c4e45a65f23fce0dd345 commit e42fafc25fa86c61824e8d4c5e7582316415d24f upstream. The ioc->pfacts member in the IOC structure is getting set to zero following a call to _base_get_ioc_facts due to the memset in that routine. So if the ioc->pfacts was read after a host reset, there would be a NULL pointer dereference. The routine _base_get_ioc_facts is called from context of host reset. The problem in _base_get_ioc_facts is the size of Mpi2IOCFactsReply is 64, whereas the sizeof "struct mpt2sas_facts" is 60, so there is a four byte overflow resulting from the memset. Also, there is memset in _base_get_port_facts using the incorrect structure, it should be "struct mpt2sas_port_facts" instead of Mpi2PortFactsReply. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e42fafc25fa86c61824e8d4c5e7582316415d24f upstream.

The ioc->pfacts member in the IOC structure is getting set to zero
following a call to _base_get_ioc_facts due to the memset in that routine.
So if the ioc->pfacts was read after a host reset, there would be a NULL
pointer dereference. The routine _base_get_ioc_facts is called from context
of host reset.  The problem in _base_get_ioc_facts  is the size of
Mpi2IOCFactsReply is 64, whereas the sizeof "struct mpt2sas_facts" is 60,
so there is a four byte overflow resulting from the memset.

Also, there is memset in _base_get_port_facts using the incorrect structure,
it should be "struct mpt2sas_port_facts" instead of Mpi2PortFactsReply.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2012-03-31T20:31:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-03-31T20:31:23+00:00 a75ee6ecd411a50bf4da927c2fdb2cb56246a2bd Pull SCSI updates from James Bottomley: "This is primarily another round of driver updates (lpfc, bfa, fcoe, ipr) plus a new ufshcd driver. There shouldn't be anything controversial in here (The final deletion of scsi proc_ops which caused some build breakage has been held over until the next merge window to give us more time to stabilise it). I'm afraid, with me moving continents at exactly the wrong time, anything submitted after the merge window opened has been held over to the next merge window." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits) [SCSI] ipr: Driver version 2.5.3 [SCSI] ipr: Increase alignment boundary of command blocks [SCSI] ipr: Increase max concurrent oustanding commands [SCSI] ipr: Remove unnecessary memory barriers [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters [SCSI] ipr: Fix target id allocation re-use problem [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up [SCSI] bfa: Update the driver version to 3.0.23.0 [SCSI] bfa: BSG and User interface fixes. [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario. [SCSI] bfa: Move service parameter programming logic into firmware. [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation. [SCSI] bfa: Flash controller IOC pll init fixes. [SCSI] bfa: Serialize the IOC hw semaphore unlock logic. [SCSI] bfa: Modify ISR to process pending completions [SCSI] bfa: Add fc host issue lip support [SCSI] mpt2sas: remove extraneous sas_log_info messages [SCSI] libfc: fcoe_transport_create fails in single-CPU environment [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2] ... 
Pull SCSI updates from James Bottomley:
 "This is primarily another round of driver updates (lpfc, bfa, fcoe,
  ipr) plus a new ufshcd driver.  There shouldn't be anything
  controversial in here (The final deletion of scsi proc_ops which
  caused some build breakage has been held over until the next merge
  window to give us more time to stabilise it).

  I'm afraid, with me moving continents at exactly the wrong time,
  anything submitted after the merge window opened has been held over to
  the next merge window."

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits)
  [SCSI] ipr: Driver version 2.5.3
  [SCSI] ipr: Increase alignment boundary of command blocks
  [SCSI] ipr: Increase max concurrent oustanding commands
  [SCSI] ipr: Remove unnecessary memory barriers
  [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters
  [SCSI] ipr: Fix target id allocation re-use problem
  [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision
  [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up
  [SCSI] bfa: Update the driver version to 3.0.23.0
  [SCSI] bfa: BSG and User interface fixes.
  [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario.
  [SCSI] bfa: Move service parameter programming logic into firmware.
  [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation.
  [SCSI] bfa: Flash controller IOC pll init fixes.
  [SCSI] bfa: Serialize the IOC hw semaphore unlock logic.
  [SCSI] bfa: Modify ISR to process pending completions
  [SCSI] bfa: Add fc host issue lip support
  [SCSI] mpt2sas: remove extraneous sas_log_info messages
  [SCSI] libfc: fcoe_transport_create fails in single-CPU environment
  [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2]
  ...
[SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision 2012-03-28T13:36:37+00:00 Sergei Shtylyov sshtylyov@ru.mvista.com 2012-03-14T19:04:30+00:00 7d7311c44567cd2001ca318e4de64b753d9d35f8 commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (PCI: Change all drivers to use pci_device->revision) converted all drivers to use pci_dev->revision. Convert these three drivers which got missed. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (PCI: Change all
drivers to use pci_device->revision) converted all drivers to use
pci_dev->revision.  Convert these three drivers which got missed.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>