The non_fatal_log_show() function is supposed to return negative error
codes on failure.  But because the error codes are saved in a u32 and
then cast to signed long, they end up being high positive values instead
of negative.  Remove the intermediary u32 variable to fix this bug.

Fixes: dba2cc03b9db ("scsi: pm80xx: sysfs attribute for non fatal dump")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://patch.msgid.link/ahs-bEsBJH0KhnsX@stanley.mountain
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

pm80xx_get_non_fatal_dump() can be called even after the controller has
entered a fatal error state. In that case the forensic memory contents
are not safe to access for a non-fatal dump request, and attempting to
do so can trigger a call trace.

Check controller_fatal_error before reading the non-fatal dump buffer
and return -EINVAL when the controller is already in a crashed state.

This prevents non-fatal dump collection from running in an invalid
controller state.

Signed-off-by: Kumar Meiyappan <kumar.meiyappan@microchip.com>
Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com>
Link: https://patch.msgid.link/20260416154650.415624-1-sagar.biradar@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

pm8001_store_update_fw() allows a firmware update request even when the
controller has already entered a fatal error state.

Firmware update is not valid once the controller is in that state, and
attempting it can lead to a call trace. Reject the request early by
checking controller_fatal_error, set the firmware status to
FAIL_PARAMETERS, and return -EINVAL.

Signed-off-by: Kumar Meiyappan <kumar.meiyappan@microchip.com>
Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com>
Link: https://patch.msgid.link/20260416153757.414896-1-sagar.biradar@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull in remaining fixes from 7.0/scsi-queue.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>

Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.

In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.

Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled.

Fixes: e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()")
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260213192806.439432-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Currently if a user enqueues a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.  This lack of consistency cannot be addressed
without refactoring the API.

alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.

This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.

This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:

commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")

This  adds a new WQ_PERCPU flag to explicitly request to alloc_workqueue()
to be per-cpu when WQ_UNBOUND has not been specified.

With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.

Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251107155257.316728-1-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Comment out unused field 'residual_count' in a couple of structures, and
with this, fix the following -Wflex-array-member-not-at-end warnings:

drivers/scsi/pm8001/pm8001_hwi.h:342:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/scsi/pm8001/pm80xx_hwi.h:561:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]

Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Use int instead of u32 for 'ret' variable to store negative error codes
returned by PM8001_CHIP_DISP->set_nvmd_req().

Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20250826093242.230344-1-rongqianfeng@vivo.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>