linux-toradex.git/drivers/scsi/scsi_lib.c, branch v5.0

scsi: core: Avoid that system resume triggers a kernel warning

2019-02-27T13:51:07+00:00

scsi_device_quiesce() and scsi_device_resume() are called during
system-wide suspend and resume. scsi_device_quiesce() only succeeds for
SCSI devices that are in one of the RUNNING, OFFLINE or TRANSPORT_OFFLINE
states (see also scsi_set_device_state()).  This patch avoids that the
following warning is triggered when resuming a system for which quiescing a
SCSI device failed:

WARNING: CPU: 2 PID: 11303 at drivers/scsi/scsi_lib.c:2600 scsi_device_resume+0x4f/0x58
CPU: 2 PID: 11303 Comm: kworker/u8:70 Not tainted 5.0.0-rc1+ #50
Hardware name: LENOVO 80E3/Lancer 5B2, BIOS A2CN45WW(V2.13) 08/04/2016
Workqueue: events_unbound async_run_entry_fn
Call Trace:
 scsi_dev_type_resume+0x2e/0x60
 async_run_entry_fn+0x32/0xd8
 process_one_work+0x1f4/0x420
 worker_thread+0x28/0x3c0
 kthread+0x118/0x130
 ret_from_fork+0x22/0x40

Cc: Przemek Socha 
Reported-by: Przemek Socha 
Fixes: 3a0a529971ec ("block, scsi: Make SCSI quiesce and resume work reliably") # v4.15
Signed-off-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen

scsi: core: reset host byte in DID_NEXUS_FAILURE case

2019-02-16T03:17:58+00:00

Up to 4.12, __scsi_error_from_host_byte() would reset the host byte to
DID_OK for various cases including DID_NEXUS_FAILURE.  Commit
2a842acab109 ("block: introduce new block status code type") replaced this
function with scsi_result_to_blk_status() and removed the host-byte
resetting code for the DID_NEXUS_FAILURE case.  As the line
set_host_byte(cmd, DID_OK) was preserved for the other cases, I suppose
this was an editing mistake.

The fact that the host byte remains set after 4.13 is causing problems with
the sg_persist tool, which now returns success rather then exit status 24
when a RESERVATION CONFLICT error is encountered.

Fixes: 2a842acab109 "block: introduce new block status code type"
Signed-off-by: Martin Wilck 
Reviewed-by: Hannes Reinecke 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: communicate max segment size to the DMA mapping code

2019-01-23T01:40:59+00:00

When a host driver sets a maximum segment size we should not only propagate
that setting to the block layer, which can merge segments, but also to the
DMA mapping layer which can merge segments as well.

Fixes: 50c2e9107f ("scsi: introduce a max_segment_size host_template parameters")
Signed-off-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-12-28T22:48:06+00:00

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
  megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.

  Additionally, we have a pile of annotation, unused variable and minor
  updates.

  The big API change is the updates for Christoph's DMA rework which
  include removing the DISABLE_CLUSTERING flag.

  And finally there are a couple of target tree updates"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits)
  scsi: isci: request: mark expected switch fall-through
  scsi: isci: remote_node_context: mark expected switch fall-throughs
  scsi: isci: remote_device: Mark expected switch fall-throughs
  scsi: isci: phy: Mark expected switch fall-through
  scsi: iscsi: Capture iscsi debug messages using tracepoints
  scsi: myrb: Mark expected switch fall-throughs
  scsi: megaraid: fix out-of-bound array accesses
  scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
  scsi: fcoe: remove set but not used variable 'port'
  scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
  scsi: smartpqi: fix build warnings
  scsi: smartpqi: update driver version
  scsi: smartpqi: add ofa support
  scsi: smartpqi: increase fw status register read timeout
  scsi: smartpqi: bump driver version
  scsi: smartpqi: add smp_utils support
  scsi: smartpqi: correct lun reset issues
  scsi: smartpqi: correct volume status
  scsi: smartpqi: do not offline disks for transient did no connect conditions
  scsi: smartpqi: allow for larger raid maps
  ...

scsi: remove the use_clustering flag

2018-12-19T04:19:21+00:00

The same effects can be achieved by setting the dma_boundary to
PAGE_SIZE - 1 and the max_segment_size to PAGE_SIZE, so shift those
settings into the drivers.  Note that in many cases the setting might
be bogus, but this keeps the status quo.

[mkp: fix myrs and myrb]

Signed-off-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: introduce a max_segment_size host_template parameters

2018-12-19T04:13:12+00:00

This allows the host driver to indicate the maximum supported
segment size in a nice an easy way, so that the driver doesn't
have to worry about DMA-layer imposed limitations.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen

scsi: flip the default on use_clustering

2018-12-19T04:13:12+00:00

Most SCSI drivers want to enable "clustering", that is merging of
segments so that they might span more than a single page.  Remove the
ENABLE_CLUSTERING define, and require drivers to explicitly set
DISABLE_CLUSTERING to disable this feature.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: Do not rely on blk-mq for double completions

2018-11-26T17:34:26+00:00

The scsi timeout error handling had been directly updating the block
layer's request state to prevent a error handling and a natural completion
from completing the same request twice. Fix this layering violation
by having scsi control the fate of its commands with scsi owned flags
rather than use blk-mq's.

Reviewed-by: Christoph Hellwig 
Signed-off-by: Keith Busch 
Signed-off-by: Jens Axboe

Merge tag 'v4.20-rc3' into for-4.21/block

2018-11-18T22:46:03+00:00

Merge in -rc3 to resolve a few conflicts, but also to get a few
important fixes that have gone into mainline since the block
4.21 branch was forked off (most notably the SCSI queue issue,
which is both a conflict AND needed fix).

Signed-off-by: Jens Axboe

SCSI: fix queue cleanup race before queue initialization is done

2018-11-14T15:19:10+00:00

c2856ae2f315d ("blk-mq: quiesce queue before freeing queue") has
already fixed this race, however the implied synchronize_rcu()
in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused
performance regression.

Then 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
tried to quiesce queue for avoiding unnecessary synchronize_rcu()
only when queue initialization is done, because it is usual to see
lots of inexistent LUNs which need to be probed.

However, turns out it isn't safe to quiesce queue only when queue
initialization is done. Because when one SCSI command is completed,
the user of sending command can be waken up immediately, then the
scsi device may be removed, meantime the run queue in scsi_end_request()
is still in-progress, so kernel panic can be caused.

In Red Hat QE lab, there are several reports about this kind of kernel
panic triggered during kernel booting.

This patch tries to address the issue by grabing one queue usage
counter during freeing one request and the following run queue.

Fixes: 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
Cc: Andrew Jones 
Cc: Bart Van Assche 
Cc: linux-scsi@vger.kernel.org
Cc: Martin K. Petersen 
Cc: Christoph Hellwig 
Cc: James E.J. Bottomley 
Cc: stable 
Cc: jianchao.wang 
Signed-off-by: Ming Lei 
Signed-off-by: Jens Axboe