linux-toradex.git/drivers/scsi/scsi_sysfs.c, branch v2.6.31.4

sd, sr: fix Driver 'sd' needs updating message

2009-06-21T17:01:27+00:00

If a SCSI ULD driver sets blk_queue_prep_rq(), it should clean it
up itself on remove(), and not from the bus callbacks. This
removes the need to hook into bus->remove(), which should not
be used at the same time as driver->remove().

[jejb: fix sdkp initialisation problem due to mismerge]
Signed-off-by: Hannes Reinecke 
Signed-off-by: Kay Sievers 
Signed-off-by: James Bottomley

[SCSI] scsi_sysfs: delete extra kernel-doc

2009-03-12T17:57:55+00:00

Warning(linux-2.6.28-git13//drivers/scsi/scsi_sysfs.c:1049): Excess function parameter 'dev' description in 'scsi_sysfs_add_host'

Signed-off-by: Randy Dunlap 
Signed-off-by: James Bottomley

[SCSI] struct device - replace bus_id with dev_name(), dev_set_name()

2009-01-02T16:22:16+00:00

[jejb: limit ioctl to returning 20 characters to avoid overrun
       on long device names and add a few more conversions]
Signed-off-by: Kay Sievers 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: James Bottomley

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

2008-10-10T17:53:26+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits)
  [SCSI] zfcp: fix double dbf id usage
  [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev
  [SCSI] zfcp: fix erp list usage without using locks
  [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport
  [SCSI] zfcp: fix deadlock caused by shared work queue tasks
  [SCSI] zfcp: put threshold data in hba trace
  [SCSI] zfcp: Simplify zfcp data structures
  [SCSI] zfcp: Simplify get_adapter_by_busid
  [SCSI] zfcp: remove all typedefs and replace them with standards
  [SCSI] zfcp: attach and release SAN nameserver port on demand
  [SCSI] zfcp: remove unused references, declarations and flags
  [SCSI] zfcp: Update message with input from review
  [SCSI] zfcp: add queue_full sysfs attribute
  [SCSI] scsi_dh: suppress comparison warning
  [SCSI] scsi_dh: add Dell product information into rdac device handler
  [SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option
  [SCSI] qla2xxx: fix printk format warnings
  [SCSI] qla2xxx: Update version number to 8.02.01-k8.
  [SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing.
  [SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling.
  ...

block: unify request timeout handling

2008-10-09T06:56:13+00:00

Right now SCSI and others do their own command timeout handling.
Move those bits to the block layer.

Instead of having a timer per command, we try to be a bit more clever
and simply have one per-queue. This avoids the overhead of having to
tear down and setup a timer for each command, so it will result in a lot
less timer fiddling.

Signed-off-by: Mike Anderson 
Signed-off-by: Jens Axboe

[SCSI] Update the SCSI state model to allow blocking in the created state

2008-10-03T16:46:13+00:00

Brian King  reported that fibre channel
devices can oops during scanning if their ports block (because the
device goes from CREATED -> BLOCK -> RUNNING rather than CREATED ->
BLOCK -> CREATED).

Fix this by adding a new state: CREATED_BLOCK which can only transition
back to CREATED and disallow the CREATED -> BLOCK transition.  Now both
the created and blocked states that the mid-layer recognises can include
CREATED_BLOCK.

Signed-off-by: James Bottomley

[SCSI] Host protection capabilities

2008-07-26T19:14:54+00:00

Controllers that support protection information must indicate this to
the SCSI midlayer so that the ULD can prepare scsi_cmnds accordingly.

This patch implements a host mask and various types of protection:

 - DIF Type 1-3 (between HBA and disk)
 - DIX Type 0-3 (between OS and HBA)

The patch also allows the HBA to set the guard type to something
different than the T10-mandated CRC.

Signed-off-by: Martin K. Petersen 
Signed-off-by: James Bottomley

[SCSI] scsi_dh: add infrastructure for SCSI Device Handlers

2008-06-05T14:23:40+00:00

Some of the storage devices (that can be accessed through multiple paths),
do need some special handling for
	1. Activating the passive path of the storage access.
	2. Decode and handle the special sense codes returned by the devices.
	3. Handle the I/Os being sent to the passive path, especially
           during the device probe time.
when accessed through multiple paths.

As of today this special device handling is done at the dm-multipath
layer using dm-handlers. That works well for (1); for (2) to be handled
at dm layer, scsi sense information need to be exported from SCSI to dm-layer,
which is not very attractive; (3) cannot be done at all at the dm layer.

Device handler has been moved to SCSI mainly to handle (2) and (3) properly.

Signed-off-by: Chandra Seetharaman 
Signed-off-by: Mike Anderson 
Signed-off-by: Mike Christie 
Signed-off-by: James Bottomley

[SCSI] fix intermittent oops in scsi_bus_uevent

2008-05-23T21:17:06+00:00

Reported-by: Sitsofe Wheeler 
> BUG: unable to handle kernel paging request at e6f17fac
> IP: [] scsi_bus_uevent+0x1/0x17
> *pde = 2714b163 *pte = 26f17160
> Oops: 0000 [#1] DEBUG_PAGEALLOC
> last sysfs file:
>
> Pid:  1, comm: swapper Not tainted (2.6.26-rc2-next-20080516skw #30)
> EIP: 0060:[] EFLAGS: 00010282 CPU: 0
> EIP is at scsi_bus_uevent+0x1/0x17
> EAX: e6f18014 EBX: e6f18014 ECX: c02604d5 EDX: e7173000
> ESI: e7173000 EDI: e7173000 EBP: e7851ca0 ESP: e7851c90
>  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068

The problem is caused by:

commit b0ed43360fdca227048d88a08290365cb681c1a8
Author: Hannes Reinecke 
Date:   Tue Mar 18 14:32:28 2008 +0100

    [SCSI] add scsi_host and scsi_target to scsi_bus

which added scsi_bus_type to the struct scsi_target device.  This
causes both the scsi_device and scsi_target to fire scsi_bus_uevents.
However, the actualy scsi_bus_uevent() call assumes blindly that it's
a struct scsi_device.  Check for this and return immediately if it
isn't.

Signed-off-by: James Bottomley

[SCSI] bsg: add release callback support

2008-04-22T20:16:32+00:00

This patch adds release callback support, which is called when a bsg
device goes away. bsg_register_queue() takes a pointer to a callback
function. This feature is useful for stuff like sas_host that can't
use the release callback in struct device.

If a caller doesn't need bsg's release callback, it can call
bsg_register_queue() with NULL pointer (e.g. scsi devices can use
release callback in struct device so they don't need bsg's callback).

With this patch, bsg uses kref for refcounts on bsg devices instead of
get/put_device in fops->open/release. bsg calls put_device and the
caller's release callback (if it was registered) in kref_put's
release.

Signed-off-by: FUJITA Tomonori 
Signed-off-by: James Bottomley