linux-toradex.git/drivers/scsi/sd_zbc.c, branch v5.8-rc2

Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block

2020-06-02T22:29:19+00:00

Pull block updates from Jens Axboe:
 "Core block changes that have been queued up for this release:

   - Remove dead blk-throttle and blk-wbt code (Guoqing)

   - Include pid in blktrace note traces (Jan)

   - Don't spew I/O errors on wouldblock termination (me)

   - Zone append addition (Johannes, Keith, Damien)

   - IO accounting improvements (Konstantin, Christoph)

   - blk-mq hardware map update improvements (Ming)

   - Scheduler dispatch improvement (Salman)

   - Inline block encryption support (Satya)

   - Request map fixes and improvements (Weiping)

   - blk-iocost tweaks (Tejun)

   - Fix for timeout failing with error injection (Keith)

   - Queue re-run fixes (Douglas)

   - CPU hotplug improvements (Christoph)

   - Queue entry/exit improvements (Christoph)

   - Move DMA drain handling to the few drivers that use it (Christoph)

   - Partition handling cleanups (Christoph)"

* tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits)
  block: mark bio_wouldblock_error() bio with BIO_QUIET
  blk-wbt: rename __wbt_update_limits to wbt_update_limits
  blk-wbt: remove wbt_update_limits
  blk-throttle: remove tg_drain_bios
  blk-throttle: remove blk_throtl_drain
  null_blk: force complete for timeout request
  blk-mq: drain I/O when all CPUs in a hctx are offline
  blk-mq: add blk_mq_all_tag_iter
  blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx
  blk-mq: use BLK_MQ_NO_TAG in more places
  blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG
  blk-mq: move more request initialization to blk_mq_rq_ctx_init
  blk-mq: simplify the blk_mq_get_request calling convention
  blk-mq: remove the bio argument to ->prepare_request
  nvme: force complete cancelled requests
  blk-mq: blk-mq: provide forced completion method
  block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds
  block: blk-crypto-fallback: remove redundant initialization of variable err
  block: reduce part_stat_lock() scope
  block: use __this_cpu_add() instead of access by smp_processor_id()
  ...

mm: remove the pgprot argument to __vmalloc

2020-06-02T17:59:11+00:00

The pgprot argument to __vmalloc is always PAGE_KERNEL now, so remove it.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Reviewed-by: Michael Kelley  [hyperv]
Acked-by: Gao Xiang  [erofs]
Acked-by: Peter Zijlstra (Intel) 
Acked-by: Wei Liu 
Cc: Christian Borntraeger 
Cc: Christophe Leroy 
Cc: Daniel Vetter 
Cc: David Airlie 
Cc: Greg Kroah-Hartman 
Cc: Haiyang Zhang 
Cc: Johannes Weiner 
Cc: "K. Y. Srinivasan" 
Cc: Laura Abbott 
Cc: Mark Rutland 
Cc: Minchan Kim 
Cc: Nitin Gupta 
Cc: Robin Murphy 
Cc: Sakari Ailus 
Cc: Stephen Hemminger 
Cc: Sumit Semwal 
Cc: Benjamin Herrenschmidt 
Cc: Catalin Marinas 
Cc: Heiko Carstens 
Cc: Paul Mackerras 
Cc: Vasily Gorbik 
Cc: Will Deacon 
Link: http://lkml.kernel.org/r/20200414131348.444715-22-hch@lst.de
Signed-off-by: Linus Torvalds

scsi: sd_zbc: emulate ZONE_APPEND commands

2020-05-13T02:36:28+00:00

Emulate ZONE_APPEND for SCSI disks using a regular WRITE(16) command
with a start LBA set to the target zone write pointer position.

In order to always know the write pointer position of a sequential write
zone, the write pointer of all zones is tracked using an array of 32bits
zone write pointer offset attached to the scsi disk structure. Each
entry of the array indicate a zone write pointer position relative to
the zone start sector. The write pointer offsets are maintained in sync
with the device as follows:
1) the write pointer offset of a zone is reset to 0 when a
   REQ_OP_ZONE_RESET command completes.
2) the write pointer offset of a zone is set to the zone size when a
   REQ_OP_ZONE_FINISH command completes.
3) the write pointer offset of a zone is incremented by the number of
   512B sectors written when a write, write same or a zone append
   command completes.
4) the write pointer offset of all zones is reset to 0 when a
   REQ_OP_ZONE_RESET_ALL command completes.

Since the block layer does not write lock zones for zone append
commands, to ensure a sequential ordering of the regular write commands
used for the emulation, the target zone of a zone append command is
locked when the function sd_zbc_prepare_zone_append() is called from
sd_setup_read_write_cmnd(). If the zone write lock cannot be obtained
(e.g. a zone append is in-flight or a regular write has already locked
the zone), the zone append command dispatching is delayed by returning
BLK_STS_ZONE_RESOURCE.

To avoid the need for write locking all zones for REQ_OP_ZONE_RESET_ALL
requests, use a spinlock to protect accesses and modifications of the
zone write pointer offsets. This spinlock is initialized from sd_probe()
using the new function sd_zbc_init().

Co-developed-by: Damien Le Moal 
Signed-off-by: Johannes Thumshirn 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Martin K. Petersen 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Jens Axboe

scsi: sd_zbc: factor out sanity checks for zoned commands

2020-05-13T02:36:28+00:00

Factor sanity checks for zoned commands from sd_zbc_setup_zone_mgmt_cmnd().

This will help with the introduction of an emulated ZONE_APPEND command.

Signed-off-by: Johannes Thumshirn 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Bart Van Assche 
Reviewed-by: Hannes Reinecke 
Reviewed-by: Martin K. Petersen 
Signed-off-by: Jens Axboe

scsi: sd_sbc: Fix sd_zbc_report_zones()

2020-02-24T17:50:32+00:00

The block layer generic blk_revalidate_disk_zones() checks the validity of
zone descriptors reported by a disk using the blk_revalidate_zone_cb()
callback function executed for each zone descriptor. If a ZBC disk reports
invalid zone descriptors, blk_revalidate_disk_zones() returns an error and
sd_zbc_read_zones() changes the disk capacity to 0, which in turn results
in the gendisk structure capacity to be set to 0. This all works well for
the first revalidate pass on a disk and the block layer detects the
capactiy change.

On the second revalidate pass, blk_revalidate_disk_zones() is called again
and sd_zbc_report_zones() executed to check the zones a second time.
However, for this second pass, the gendisk capacity is now 0, which results
in sd_zbc_report_zones() to do nothing and to report success and no
zones. blk_revalidate_disk_zones() in turn returns success and sets the
disk queue chunk_sectors limit with zero as no zones were checked, causing
a oops to trigger on the BUG_ON(!is_power_of_2(chunk_sectors)) in
blk_queue_chunk_sectors().

Fix this by using the sdkp capacity field rather than the gendisk capacity
for the report zones loop in sd_zbc_report_zones(). Also add a check to
return immediately an error if the sdkp capacity is 0.  With this fix,
invalid/buggy ZBC disk scan does not trigger a oops and are exposed with a
0 capacity. This change also preserve the chance for the disk to be
correctly revalidated on the second revalidate pass as the scsi disk
structure capacity field is always set to the disk reported value when
sd_zbc_report_zones() is called.

Link: https://lore.kernel.org/r/20200219063800.880834-1-damien.lemoal@wdc.com
Fixes: d41003513e61 ("block: rework zone reporting")
Cc: Cc:  # v5.5
Reviewed-by: Christoph Hellwig 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Damien Le Moal 
Signed-off-by: Martin K. Petersen

scsi: sd_zbc: Rename sd_zbc_check_zones()

2020-01-03T02:53:31+00:00

Now that the block layer implement zone checks on revalidate,
sd_zbc_check_zones() is reduced getting the zone size and verifying the
device capacity for device with RC_BASIS=0. Be clear about this by renaming
sd_zbc_check_zones() to sd_zbc_check_capacity() and updating the function
description and comments.

Link: https://lore.kernel.org/r/20191220075823.400072-3-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal 
Signed-off-by: Martin K. Petersen

scsi: sd_zbc: Simplify sd_zbc_check_zones()

2020-01-03T02:53:31+00:00

Now that the block layer generic zone revalidation code in
blk_revalidate_disk_zones() checks for power of 2 zone size, there is no
need to do it in sd_zbc_check_zones(). Remove this check.

Link: https://lore.kernel.org/r/20191220075823.400072-2-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal 
Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-12-08T20:23:42+00:00

Pull more SCSI updates from James Bottomley:
 "Eleven patches, all in drivers (no core changes) that are either minor
  cleanups or small fixes.

  They were late arriving, but still safe for -rc1"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry
  scsi: megaraid_sas: Make poll_aen_lock static
  scsi: sd_zbc: Improve report zones error printout
  scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
  scsi: qla2xxx: unregister ports after GPN_FT failure
  scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
  scsi: pm80xx: Remove unused include of linux/version.h
  scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3
  scsi: scsi_transport_sas: Fix memory leak when removing devices
  scsi: lpfc: size cpu map by last cpu id set
  scsi: ibmvscsi_tgt: Remove unneeded variable rc

block: set the zone size in blk_revalidate_disk_zones atomically

2019-12-03T17:18:22+00:00

The current zone revalidation code has a major problem in that it
doesn't update the zone size and q->nr_zones atomically, leading
to a short window where an out of bounds access to the zone arrays
is possible.

To fix this move the setting of the zone size into the crticial
sections blk_revalidate_disk_zones so that it gets updated together
with the zone bitmaps and q->nr_zones.  This also slightly simplifies
the caller as it deducts the zone size from the report_zones.

This change also allows to check for a power of two zone size in generic
code.

Reported-by: Hans Holmberg 
Reviewed-by: Javier González 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

scsi: sd_zbc: Improve report zones error printout

2019-11-27T02:43:22+00:00

In the case of a report zones command failure, instead of simply printing
the host_byte and driver_byte values returned, print a message that is more
human readable and useful, adding sense codes too.

To do so, use the already defined sd_print_sense_hdr() and
sd_print_result() functions by moving the declaration of these functions
into sd.h.

Link: https://lore.kernel.org/r/20191125070518.951717-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal 
Signed-off-by: Martin K. Petersen