linux-toradex.git/drivers/scsi/smartpqi, branch v5.0

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-01-19T21:15:04+00:00

Pull SCSI fixes from James Bottomley:
 "A set of 17 fixes. Most of these are minor or trivial.

  The one fix that may be serious is the isci one: the bug can cause hba
  parameters to be set from uninitialized memory. I don't think it's
  exploitable, but you never know"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: cxgb4i: add wait_for_completion()
  scsi: qla1280: set 64bit coherent mask
  scsi: ufs: Fix geometry descriptor size
  scsi: megaraid_sas: Retry reads of outbound_intr_status reg
  scsi: qedi: Add ep_state for login completion on un-reachable targets
  scsi: ufs: Fix system suspend status
  scsi: qla2xxx: Use correct number of vectors for online CPUs
  scsi: hisi_sas: Set protection parameters prior to adding SCSI host
  scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes
  scsi: isci: initialize shost fully before calling scsi_add_host()
  scsi: lpfc: lpfc_sli: Mark expected switch fall-throughs
  scsi: smartpqi_init: fix boolean expression in pqi_device_remove_start
  scsi: core: Synchronize request queue PM status only on successful resume
  scsi: pm80xx: reduce indentation
  scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param
  scsi: megaraid_sas: correct an info message
  scsi: target/iscsi: fix error msg typo when create lio_qr_cache failed
  scsi: sd: Fix cache_type_store()

scsi: smartpqi_init: fix boolean expression in pqi_device_remove_start

2019-01-09T02:57:26+00:00

Fix boolean expression by using logical AND operator '&&' instead of
bitwise operator '&'.

This issue was detected with the help of Coccinelle.

Fixes: 1e46731efd9c ("scsi: smartpqi: check for null device pointers")
Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Gustavo A. R. Silva 
Acked-by: Don Brace 
Signed-off-by: Martin K. Petersen

cross-tree: phase out dma_zalloc_coherent()

2019-01-08T12:58:37+00:00

We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.

This change was generated with the following Coccinelle SmPL patch:

@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@

-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)

Suggested-by: Christoph Hellwig 
Signed-off-by: Luis Chamberlain 
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-12-28T22:48:06+00:00

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
  megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.

  Additionally, we have a pile of annotation, unused variable and minor
  updates.

  The big API change is the updates for Christoph's DMA rework which
  include removing the DISABLE_CLUSTERING flag.

  And finally there are a couple of target tree updates"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits)
  scsi: isci: request: mark expected switch fall-through
  scsi: isci: remote_node_context: mark expected switch fall-throughs
  scsi: isci: remote_device: Mark expected switch fall-throughs
  scsi: isci: phy: Mark expected switch fall-through
  scsi: iscsi: Capture iscsi debug messages using tracepoints
  scsi: myrb: Mark expected switch fall-throughs
  scsi: megaraid: fix out-of-bound array accesses
  scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
  scsi: fcoe: remove set but not used variable 'port'
  scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
  scsi: smartpqi: fix build warnings
  scsi: smartpqi: update driver version
  scsi: smartpqi: add ofa support
  scsi: smartpqi: increase fw status register read timeout
  scsi: smartpqi: bump driver version
  scsi: smartpqi: add smp_utils support
  scsi: smartpqi: correct lun reset issues
  scsi: smartpqi: correct volume status
  scsi: smartpqi: do not offline disks for transient did no connect conditions
  scsi: smartpqi: allow for larger raid maps
  ...

scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()

2018-12-21T00:38:10+00:00

We must free all irqs during shutdown, else kexec's 2nd kernel would hang
in pqi_wait_for_completion_io() as below:

Call trace:

 pqi_wait_for_completion_io
 pqi_submit_raid_request_synchronous.constprop.78+0x23c/0x310 [smartpqi]
 pqi_configure_events+0xec/0x1f8 [smartpqi]
 pqi_ctrl_init+0x814/0xca0 [smartpqi]
 pqi_pci_probe+0x400/0x46c [smartpqi]
 local_pci_probe+0x48/0xb0
 pci_device_probe+0x14c/0x1b0
 really_probe+0x218/0x3fc
 driver_probe_device+0x70/0x140
 __driver_attach+0x11c/0x134
 bus_for_each_dev+0x70/0xc8
 driver_attach+0x30/0x38
 bus_add_driver+0x1f0/0x294
 driver_register+0x74/0x12c
 __pci_register_driver+0x64/0x70
 pqi_init+0xd0/0x10000 [smartpqi]
 do_one_initcall+0x60/0x1d8
 do_init_module+0x64/0x1f8
 load_module+0x10ec/0x1350
 __se_sys_finit_module+0xd4/0x100
 __arm64_sys_finit_module+0x28/0x34
 el0_svc_handler+0x104/0x160
 el0_svc+0x8/0xc

This happens only in the following combinations:

1. smartpqi is built as module, not built-in;
2. We have a disk connected to smartpqi card;
3. Both kexec's 1st and 2nd kernels use this disk as Rootfs' mount point.

Signed-off-by: Yanjiang Jin 
Acked-by: Don Brace 
Signed-off-by: Martin K. Petersen

scsi: smartpqi: fix build warnings

2018-12-21T00:33:54+00:00

Fix kbuild warning and fallout from linux-next -Wimplicit-fallthrough.

[mkp: added fall through statements]

Signed-off-by: Don Brace 
Signed-off-by: Martin K. Petersen

scsi: smartpqi: update driver version

2018-12-20T03:27:52+00:00

- need to bump up the driver version because
  of the OFA patch and the fw status register
  read timeout patch.

Reviewed-by: Gerry Morong 
Signed-off-by: Don Brace 
Signed-off-by: Martin K. Petersen

scsi: smartpqi: add ofa support

2018-12-20T03:27:52+00:00

- when OFA event occurs, driver will stop traffic to RAID/HBA path. Driver
  waits for all the outstanding requests to complete.
- Driver sends OFA event acknowledgment to firmware.
- Driver will wait until the new firmware is up and running.
- Driver will free up the resources.
- Driver calls SIS/PQI initialization and rescans the device list.
- Driver will resume the traffic to RAID/HBA path.

Reviewed-by: Murthy Bhat 
Signed-off-by: Mahesh Rajashekhara 
Signed-off-by: Don Brace 
Signed-off-by: Martin K. Petersen

scsi: smartpqi: increase fw status register read timeout

2018-12-20T03:27:52+00:00

Problem:
 - during the driver initialization, driver will poll fw
   for KERNEL_UP in a 30 seconds timeout.

 - if the firmware is not ready after 30 seconds,
   driver will not be loaded.

Fix:
 - change timeout from 30 seconds to 3 minutes.

Reported-by: Feng Li 
Reviewed-by: Ajish Koshy 
Reviewed-by: Murthy Bhat 
Reviewed-by: Dave Carroll 
Reviewed-by: Kevin Barnett 
Signed-off-by: Mahesh Rajashekhara 
Signed-off-by: Don Brace 
Signed-off-by: Martin K. Petersen

scsi: smartpqi: bump driver version

2018-12-20T03:23:35+00:00

Reviewed-by: Gerry Morong 
Reviewed-by: Dave Carroll 
Signed-off-by: Don Brace 
Signed-off-by: Martin K. Petersen