linux-toradex.git/drivers/scsi/stex.c, branch v4.6-rc3

stex: Add S3/S4 support

2016-02-24T02:27:02+00:00

Add S3/S4 support, add .suspend and .resume function in pci_driver.  In
.suspend handler, driver send S3/S4 signal to the device.

Signed-off-by: Charles Chiou 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen

stex: Add hotplug support

2016-02-24T02:27:02+00:00

1. Add hotplug support. Pegasus support surprise removal. To this end, I
   use return_abnormal_state function to return DID_NO_CONNECT for all
   commands which sent to driver.

2. Remove stex_hba_stop in stex_remove because we cannot send command to
   device after hotplug.

3. Add new device status: MU_STATE_STOP, MU_STATE_NOCONNECT,
   MU_STATE_STOP. MU_STATE_STOP is currently not referenced.
   MU_STATE_NOCONNECT represent that device is plugged out from the
   host.

4. Use return_abnormal_function() to substitute part of code in
   stex_do_reset.

Signed-off-by: Charles Chiou 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen

stex: Support to Pegasus series.

2016-02-24T02:27:02+00:00

Pegasus is a high performace hardware RAID solution designed to unleash
the raw power of Thunderbolt technology.

1. Add code to distinct SuperTrack and Pegasus series by sub device ID.
   It should support backward compatibility.

2. Change the driver version.

Signed-off-by: Charles Chiou 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen

stex: Remove use of struct timeval

2015-11-10T01:42:19+00:00

Function stex_gettime uses 'struct timeval' whose tv_sec value
will overflow on 32-bit systems in year 2038 and beyond. This patch
replaces the use of struct timeval and do_gettimeofday with
ktime_get_real_seconds, which returns a 64-bit seconds value.

Suggested-by: Arnd Bergmann 
Signed-off-by: Tina Ruchandani 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: James Bottomley

scsi: use host wide tags by default

2015-11-10T01:11:57+00:00

This patch changes the !blk-mq path to the same defaults as the blk-mq
I/O path by always enabling block tagging, and always using host wide
tags.  We've had blk-mq available for a few releases so bugs with
this mode should have been ironed out, and this ensures we get better
coverage of over tagging setup over different configs.

Signed-off-by: Christoph Hellwig 
Acked-by: Jens Axboe 
Reviewed-by: Hannes Reinecke 
Signed-off-by: James Bottomley

scsi: don't force tagged_supported in drivers

2014-11-12T10:19:44+00:00

Now that we also get proper values in cmd->request->tag for untagged
commands, there is no need to force tagged_supported to on in drivers
that need host-wide tags.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Mike Christie 
Reviewed-by: Hannes Reinecke

scsi: don't set tagging state from scsi_adjust_queue_depth

2014-11-12T10:19:43+00:00

Remove the tagged argument from scsi_adjust_queue_depth, and just let it
handle the queue depth.  For most drivers those two are fairly separate,
given that most modern drivers don't care about the SCSI "tagged" status
of a command at all, and many old drivers allow queuing of multiple
untagged commands in the driver.

Instead we start out with the ->simple_tags flag set before calling
->slave_configure, which is how all drivers actually looking at
->simple_tags except for one worke anyway.  The one other case looks
broken, but I've kept the behavior as-is for now.

Except for that we only change ->simple_tags from the ->change_queue_type,
and when rejecting a tag message in a single driver, so keeping this
churn out of scsi_adjust_queue_depth is a clear win.

Now that the usage of scsi_adjust_queue_depth is more obvious we can
also remove all the trivial instances in ->slave_alloc or ->slave_configure
that just set it to the cmd_per_lun default.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Mike Christie 
Reviewed-by: Hannes Reinecke 
Reviewed-by: Martin K. Petersen

scsi: always assign block layer tags if enabled

2014-11-12T10:19:43+00:00

Allow a driver to ask for block layer tags by setting .use_blk_tags in the
host template, in which case it will always see a valid value in
request->tag, similar to the behavior when using blk-mq.  This means even
SCSI "untagged" commands will now have a tag, which is especially useful
when using a host-wide tag map.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Mike Christie 
Reviewed-by: Martin K. Petersen 
Reviewed-by: Hannes Reinecke

scsi: Remove scsi_print_command when calling abort

2014-11-12T10:16:04+00:00

Calling scsi_print_command should not be necessary during abort;
if the information is required one should enable scsi logging.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Robert Elliott 
Signed-off-by: Christoph Hellwig

SCSI: remove unnecessary pci_set_drvdata()

2013-10-14T13:26:04+00:00

Since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d
(device-core: Ensure drvdata = NULL when no driver is bound),
the driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han 
Cc: James Bottomley 
Signed-off-by: Jiri Kosina