linux-toradex.git/drivers/scsi, branch v4.4.93 Linux kernel for Apalis and Colibri modules scsi: sd: Do not override max_sectors_kb sysfs setting 2017-10-12T09:27:33+00:00 Martin K. Petersen martin.petersen@oracle.com 2017-09-28T01:38:59+00:00 9e78ac87626a92fdf71e519f71a76c6f6d4dfea3 commit 77082ca503bed061f7fbda7cfd7c93beda967a41 upstream. A user may lower the max_sectors_kb setting in sysfs to accommodate certain workloads. Previously we would always set the max I/O size to either the block layer default or the optional preferred I/O size reported by the device. Keep the current heuristics for the initial setting of max_sectors_kb. For subsequent invocations, only update the current queue limit if it exceeds the capabilities of the hardware. Reported-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Tested-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 77082ca503bed061f7fbda7cfd7c93beda967a41 upstream.

A user may lower the max_sectors_kb setting in sysfs to accommodate
certain workloads. Previously we would always set the max I/O size to
either the block layer default or the optional preferred I/O size
reported by the device.

Keep the current heuristics for the initial setting of max_sectors_kb.
For subsequent invocations, only update the current queue limit if it
exceeds the capabilities of the hardware.

Reported-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: scsi_transport_iscsi: fix the issue that iscsi_if_rx doesn't parse nlmsg properly 2017-10-05T07:41:44+00:00 Xin Long lucien.xin@gmail.com 2017-08-27T12:25:26+00:00 9d2534917c25a58b67864ea1db930670d48dee75 commit c88f0e6b06f4092995688211a631bb436125d77b upstream. ChunYu found a kernel crash by syzkaller: [ 651.617875] kasan: CONFIG_KASAN_INLINE enabled [ 651.618217] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 651.618731] general protection fault: 0000 [#1] SMP KASAN [ 651.621543] CPU: 1 PID: 9539 Comm: scsi Not tainted 4.11.0.cov #32 [ 651.621938] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 651.622309] task: ffff880117780000 task.stack: ffff8800a3188000 [ 651.622762] RIP: 0010:skb_release_data+0x26c/0x590 [...] [ 651.627260] Call Trace: [ 651.629156] skb_release_all+0x4f/0x60 [ 651.629450] consume_skb+0x1a5/0x600 [ 651.630705] netlink_unicast+0x505/0x720 [ 651.632345] netlink_sendmsg+0xab2/0xe70 [ 651.633704] sock_sendmsg+0xcf/0x110 [ 651.633942] ___sys_sendmsg+0x833/0x980 [ 651.637117] __sys_sendmsg+0xf3/0x240 [ 651.638820] SyS_sendmsg+0x32/0x50 [ 651.639048] entry_SYSCALL_64_fastpath+0x1f/0xc2 It's caused by skb_shared_info at the end of sk_buff was overwritten by ISCSI_KEVENT_IF_ERROR when parsing nlmsg info from skb in iscsi_if_rx. During the loop if skb->len == nlh->nlmsg_len and both are sizeof(*nlh), ev = nlmsg_data(nlh) will acutally get skb_shinfo(SKB) instead and set a new value to skb_shinfo(SKB)->nr_frags by ev->type. This patch is to fix it by checking nlh->nlmsg_len properly there to avoid over accessing sk_buff. Reported-by: ChunYu Wang <chunwang@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c88f0e6b06f4092995688211a631bb436125d77b upstream.

ChunYu found a kernel crash by syzkaller:

[  651.617875] kasan: CONFIG_KASAN_INLINE enabled
[  651.618217] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  651.618731] general protection fault: 0000 [#1] SMP KASAN
[  651.621543] CPU: 1 PID: 9539 Comm: scsi Not tainted 4.11.0.cov #32
[  651.621938] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  651.622309] task: ffff880117780000 task.stack: ffff8800a3188000
[  651.622762] RIP: 0010:skb_release_data+0x26c/0x590
[...]
[  651.627260] Call Trace:
[  651.629156]  skb_release_all+0x4f/0x60
[  651.629450]  consume_skb+0x1a5/0x600
[  651.630705]  netlink_unicast+0x505/0x720
[  651.632345]  netlink_sendmsg+0xab2/0xe70
[  651.633704]  sock_sendmsg+0xcf/0x110
[  651.633942]  ___sys_sendmsg+0x833/0x980
[  651.637117]  __sys_sendmsg+0xf3/0x240
[  651.638820]  SyS_sendmsg+0x32/0x50
[  651.639048]  entry_SYSCALL_64_fastpath+0x1f/0xc2

It's caused by skb_shared_info at the end of sk_buff was overwritten by
ISCSI_KEVENT_IF_ERROR when parsing nlmsg info from skb in iscsi_if_rx.

During the loop if skb->len == nlh->nlmsg_len and both are sizeof(*nlh),
ev = nlmsg_data(nlh) will acutally get skb_shinfo(SKB) instead and set a
new value to skb_shinfo(SKB)->nr_frags by ev->type.

This patch is to fix it by checking nlh->nlmsg_len properly there to
avoid over accessing sk_buff.

Reported-by: ChunYu Wang <chunwang@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: qla2xxx: Fix an integer overflow in sysfs code 2017-09-27T09:00:16+00:00 Dan Carpenter dan.carpenter@oracle.com 2017-08-30T13:30:35+00:00 d8663aa2778965c75b5e75c7948b44f5de601a88 commit e6f77540c067b48dee10f1e33678415bfcc89017 upstream. The value of "size" comes from the user. When we add "start + size" it could lead to an integer overflow bug. It means we vmalloc() a lot more memory than we had intended. I believe that on 64 bit systems vmalloc() can succeed even if we ask it to allocate huge 4GB buffers. So we would get memory corruption and likely a crash when we call ha->isp_ops->write_optrom() and ->read_optrom(). Only root can trigger this bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=194061 Fixes: b7cc176c9eb3 ("[SCSI] qla2xxx: Allow region-based flash-part accesses.") Reported-by: shqking <shqking@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e6f77540c067b48dee10f1e33678415bfcc89017 upstream.

The value of "size" comes from the user.  When we add "start + size" it
could lead to an integer overflow bug.

It means we vmalloc() a lot more memory than we had intended.  I believe
that on 64 bit systems vmalloc() can succeed even if we ask it to
allocate huge 4GB buffers.  So we would get memory corruption and likely
a crash when we call ha->isp_ops->write_optrom() and ->read_optrom().

Only root can trigger this bug.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=194061

Fixes: b7cc176c9eb3 ("[SCSI] qla2xxx: Allow region-based flash-part accesses.")
Reported-by: shqking <shqking@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: sg: fixup infoleak when using SG_GET_REQUEST_TABLE 2017-09-27T09:00:16+00:00 Hannes Reinecke hare@suse.de 2017-09-15T12:05:16+00:00 72896ca30a7f6ceb5238714d5761e4ad4521ccc5 commit 3e0097499839e0fe3af380410eababe5a47c4cf9 upstream. When calling SG_GET_REQUEST_TABLE ioctl only a half-filled table is returned; the remaining part will then contain stale kernel memory information. This patch zeroes out the entire table to avoid this issue. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3e0097499839e0fe3af380410eababe5a47c4cf9 upstream.

When calling SG_GET_REQUEST_TABLE ioctl only a half-filled table is
returned; the remaining part will then contain stale kernel memory
information.  This patch zeroes out the entire table to avoid this
issue.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: sg: factor out sg_fill_request_table() 2017-09-27T09:00:15+00:00 Hannes Reinecke hare@suse.de 2017-09-15T12:05:15+00:00 c04996ad58eefbef5d3aafd340ce64aa54661425 commit 4759df905a474d245752c9dc94288e779b8734dd upstream. Factor out sg_fill_request_table() for better readability. [mkp: typos, applied by hand] Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4759df905a474d245752c9dc94288e779b8734dd upstream.

Factor out sg_fill_request_table() for better readability.

[mkp: typos, applied by hand]

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: sg: off by one in sg_ioctl() 2017-09-27T09:00:15+00:00 Dan Carpenter dan.carpenter@oracle.com 2017-08-17T07:09:54+00:00 f0cd701d475038d3078867cad576f6530c065120 commit bd46fc406b30d1db1aff8dabaff8d18bb423fdcf upstream. If "val" is SG_MAX_QUEUE then we are one element beyond the end of the "rinfo" array so the > should be >=. Fixes: 109bade9c625 ("scsi: sg: use standard lists for sg_requests") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bd46fc406b30d1db1aff8dabaff8d18bb423fdcf upstream.

If "val" is SG_MAX_QUEUE then we are one element beyond the end of the
"rinfo" array so the > should be >=.

Fixes: 109bade9c625 ("scsi: sg: use standard lists for sg_requests")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: sg: use standard lists for sg_requests 2017-09-27T09:00:15+00:00 Hannes Reinecke hare@suse.de 2017-04-07T07:34:16+00:00 3682e0c61ffb4fccd1a86bd2af3cbdd23723b9ed commit 109bade9c625c89bb5ea753aaa1a0a97e6fbb548 upstream. 'Sg_request' is using a private list implementation; convert it to standard lists. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 109bade9c625c89bb5ea753aaa1a0a97e6fbb548 upstream.

'Sg_request' is using a private list implementation; convert it to
standard lists.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: sg: remove 'save_scat_len' 2017-09-27T09:00:15+00:00 Hannes Reinecke hare@suse.de 2017-04-07T07:34:13+00:00 6b498ad144728628c541dbb703d14142c10311a4 commit 136e57bf43dc4babbfb8783abbf707d483cacbe3 upstream. Unused. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 136e57bf43dc4babbfb8783abbf707d483cacbe3 upstream.

Unused.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: storvsc: fix memory leak on ring buffer busy 2017-09-27T09:00:15+00:00 Long Li longli@microsoft.com 2017-08-29T00:43:59+00:00 cf22210c66ca1a252633b8ad9055b082727dff67 commit 0208eeaa650c5c866a3242201678a19e6dc4a14e upstream. When storvsc is sending I/O to Hyper-v, it may allocate a bigger buffer descriptor for large data payload that can't fit into a pre-allocated buffer descriptor. This bigger buffer is freed on return path. If I/O request to Hyper-v fails due to ring buffer busy, the storvsc allocated buffer descriptor should also be freed. [mkp: applied by hand] Fixes: be0cf6ca301c ("scsi: storvsc: Set the tablesize based on the information given by the host") Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0208eeaa650c5c866a3242201678a19e6dc4a14e upstream.

When storvsc is sending I/O to Hyper-v, it may allocate a bigger buffer
descriptor for large data payload that can't fit into a pre-allocated
buffer descriptor. This bigger buffer is freed on return path.

If I/O request to Hyper-v fails due to ring buffer busy, the storvsc
allocated buffer descriptor should also be freed.

[mkp: applied by hand]

Fixes: be0cf6ca301c ("scsi: storvsc: Set the tablesize based on the information given by the host")
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: megaraid_sas: Return pended IOCTLs with cmd_status MFI_STAT_WRONG_STATE in case adapter is dead 2017-09-27T09:00:15+00:00 Shivasharan S shivasharan.srikanteshwara@broadcom.com 2017-08-23T11:47:04+00:00 b4730f456e21ee98cec3e19837ca3e32fe689c65 commit eb3fe263a48b0d27b229c213929c4cb3b1b39a0f upstream. After a kill adapter, since the cmd_status is not set, the IOCTLs will be hung in driver resulting in application hang. Set cmd_status MFI_STAT_WRONG_STATE when completing pended IOCTLs. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit eb3fe263a48b0d27b229c213929c4cb3b1b39a0f upstream.

After a kill adapter, since the cmd_status is not set, the IOCTLs will
be hung in driver resulting in application hang.  Set cmd_status
MFI_STAT_WRONG_STATE when completing pended IOCTLs.

Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>