linux-toradex.git/drivers/scsi, branch v4.9.49

scsi: sg: recheck MMAP_IO request length with lock held

2017-09-09T15:39:42+00:00

commit 8d26f491116feaa0b16de370b6a7ba40a40fa0b4 upstream.

Commit 1bc0eb044615 ("scsi: sg: protect accesses to 'reserved' page
array") adds needed concurrency protection for the "reserve" buffer.
Some checks that are initially made outside the lock are replicated once
the lock is taken to ensure the checks and resulting decisions are made
using consistent state.

The check that a request with flag SG_FLAG_MMAP_IO set fits in the
reserve buffer also needs to be performed again under the lock to ensure
the reserve buffer length compared against matches the value in effect
when the request is linked to the reserve buffer.  An -ENOMEM should be
returned in this case, instead of switching over to an indirect buffer
as for non-MMAP_IO requests.

Signed-off-by: Todd Poynor 
Acked-by: Douglas Gilbert 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: sg: protect against races between mmap() and SG_SET_RESERVED_SIZE

2017-09-09T15:39:42+00:00

commit 6a8dadcca81fceff9976e8828cceb072873b7bd5 upstream.

Take f_mutex around mmap() processing to protect against races with the
SG_SET_RESERVED_SIZE ioctl.  Ensure the reserve buffer length remains
consistent during the mapping operation, and set the "mmap called" flag
to prevent further changes to the reserved buffer size as an atomic
operation with the mapping.

[mkp: fixed whitespace]

Signed-off-by: Todd Poynor 
Acked-by: Douglas Gilbert 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: sg: reset 'res_in_use' after unlinking reserved array

2017-09-02T05:07:54+00:00

commit e791ce27c3f6a1d3c746fd6a8f8e36c9540ec6f9 upstream.

Once the reserved page array is unused we can reset the 'res_in_use'
state; here we can do a lazy update without holding the mutex as we only
need to check against concurrent access, not concurrent release.

[mkp: checkpatch]

Fixes: 1bc0eb044615 ("scsi: sg: protect accesses to 'reserved' page array")
Signed-off-by: Hannes Reinecke 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen 
Cc: Todd Poynor 
Signed-off-by: Greg Kroah-Hartman

scsi: sg: protect accesses to 'reserved' page array

2017-09-02T05:07:54+00:00

commit 1bc0eb0446158cc76562176b80623aa119afee5b upstream.

The 'reserved' page array is used as a short-cut for mapping data,
saving us to allocate pages per request. However, the 'reserved' array
is only capable of holding one request, so this patch introduces a mutex
for protect 'sg_fd' against concurrent accesses.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Johannes Thumshirn 
Tested-by: Johannes Thumshirn 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman 

[toddpoynor@google.com: backport to 3.18-4.9,  fixup for bad ioctl
SG_SET_FORCE_LOW_DMA code removed in later versions and not modified by
the original patch.]

Signed-off-by: Hannes Reinecke 
Reviewed-by: Johannes Thumshirn 
Tested-by: Johannes Thumshirn 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Todd Poynor 
Signed-off-by: Greg Kroah-Hartman

scsi: isci: avoid array subscript warning

2017-09-02T05:07:53+00:00

commit 5cfa2a3c7342bd0b50716c8bb32ee491af43c785 upstream.

I'm getting a new warning with gcc-7:

isci/remote_node_context.c: In function 'sci_remote_node_context_destruct':
isci/remote_node_context.c:69:16: error: array subscript is above array bounds [-Werror=array-bounds]

This is odd, since we clearly cover all values for enum
scis_sds_remote_node_context_states here. Anyway, checking for an array
overflow can't harm and it makes the warning go away.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Get mutex lock before checking optrom_state

2017-08-11T15:49:35+00:00

[ Upstream commit c7702b8c22712a06080e10f1d2dee1a133ec8809 ]

There is a race condition with qla2xxx optrom functions where one thread
might modify optrom buffer, optrom_state while other thread is still
reading from it.

In couple of crashes, it was found that we had successfully passed the
following 'if' check where we confirm optrom_state to be
QLA_SREADING. But by the time we acquired mutex lock to proceed with
memory_read_from_buffer function, some other thread/process had already
modified that option rom buffer and optrom_state from QLA_SREADING to
QLA_SWAITING. Then we got ha->optrom_buffer 0x0 and crashed the system:

        if (ha->optrom_state != QLA_SREADING)
                return 0;

        mutex_lock(&ha->optrom_mutex);
        rval = memory_read_from_buffer(buf, count, &off, ha->optrom_buffer,
            ha->optrom_region_size);
        mutex_unlock(&ha->optrom_mutex);

With current optrom function we get following crash due to a race
condition:

[ 1479.466679] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 1479.466707] IP: [] memcpy+0x6/0x110
[...]
[ 1479.473673] Call Trace:
[ 1479.474296]  [] ? memory_read_from_buffer+0x3c/0x60
[ 1479.474941]  [] qla2x00_sysfs_read_optrom+0x9c/0xc0 [qla2xxx]
[ 1479.475571]  [] read+0xdb/0x1f0
[ 1479.476206]  [] vfs_read+0x9e/0x170
[ 1479.476839]  [] SyS_read+0x7f/0xe0
[ 1479.477466]  [] system_call_fastpath+0x16/0x1b

Below patch modifies qla2x00_sysfs_read_optrom,
qla2x00_sysfs_write_optrom functions to get the mutex_lock before
checking ha->optrom_state to avoid similar crashes.

The patch was applied and tested and same crashes were no longer
observed again.

Tested-by: Milan P. Gandhi 
Signed-off-by: Milan P. Gandhi 
Reviewed-by: Laurence Oberman 
Acked-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: bfa: Increase requested firmware version to 3.2.5.1

2017-08-07T01:59:50+00:00

[ Upstream commit 2d1148f0f45079d25a0fa0d67e4fdb2a656d12fb ]

bna & bfa firmware version 3.2.5.1 was submitted to linux-firmware on
Feb 17 19:10:20 2015 -0500 in 0ab54ff1dc ("linux-firmware: Add QLogic BR
Series Adapter Firmware").

bna was updated to use the newer firmware on Feb 19 16:02:32 2015 -0500 in
3f307c3d70 ("bna: Update the Driver and Firmware Version")

bfa was not updated. I presume this was an oversight but it broke support
for bfa+bna cards such as the following
	04:00.0 Fibre Channel [0c04]: Brocade Communications Systems, Inc.
		1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
	04:00.1 Fibre Channel [0c04]: Brocade Communications Systems, Inc.
		1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
	04:00.2 Ethernet controller [0200]: Brocade Communications Systems,
		Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
	04:00.3 Ethernet controller [0200]: Brocade Communications Systems,
		Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)

Currently, if the bfa module is loaded first, bna fails to probe the
respective devices with
[  215.026787] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1
[  215.043707] bna 0000:04:00.2: bar0 mapped to ffffc90001fc0000, len 262144
[  215.060656] bna 0000:04:00.2: initialization failed err=1
[  215.073893] bna 0000:04:00.3: bar0 mapped to ffffc90002040000, len 262144
[  215.090644] bna 0000:04:00.3: initialization failed err=1

Whereas if bna is loaded first, bfa fails with
[  249.592109] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0
[  249.610738] bfa 0000:04:00.0: Running firmware version is incompatible with the driver version
[  249.833513] bfa 0000:04:00.0: bfa init failed
[  249.833919] scsi host6: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.0 driver: 3.2.25.0
[  249.841446] bfa 0000:04:00.1: Running firmware version is incompatible with the driver version
[  250.045449] bfa 0000:04:00.1: bfa init failed
[  250.045962] scsi host7: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.1 driver: 3.2.25.0

Increase bfa's requested firmware version. Also increase the driver
version.  I only tested that all of the devices probe without error.

Reported-by: Tim Ehlers 
Signed-off-by: Benjamin Poirier 
Acked-by: Rasesh Mody 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: snic: Return error code on memory allocation failure

2017-08-07T01:59:49+00:00

[ Upstream commit 0371adcdaca92912baaa3256ed13e058a016e62d ]

If a call to mempool_create_slab_pool() in snic_probe() returns NULL,
return -ENOMEM to indicate failure. mempool_creat_slab_pool() only fails
if it cannot allocate memory.

https://bugzilla.kernel.org/show_bug.cgi?id=189061

Reported-by: bianpan2010@ruc.edu.cn
Signed-off-by: Burak Ok 
Signed-off-by: Andreas Schaertl 
Acked-by: Narsimhulu Musini 
Reviewed-by: Ewan D. Milne 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: fnic: Avoid sending reset to firmware when another reset is in progress

2017-08-07T01:59:49+00:00

[ Upstream commit 9698b6f473555a722bf81a3371998427d5d27bde ]

This fix is to avoid calling fnic_fw_reset_handler through
fnic_host_reset when a finc reset is alreay in progress.

Signed-off-by: Satish Kharat 
Signed-off-by: Sesidhar Baddela 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: Add STARGET_CREATED_REMOVE state to scsi_target_state

2017-07-27T22:07:59+00:00

commit f9279c968c257ee39b0d7bd2571a4d231a67bcc1 upstream.

The addition of the STARGET_REMOVE state had the side effect of
introducing a race condition that can cause a crash.

scsi_target_reap_ref_release() checks the starget->state to
see if it still in STARGET_CREATED, and if so, skips calling
transport_remove_device() and device_del(), because the starget->state
is only set to STARGET_RUNNING after scsi_target_add() has called
device_add() and transport_add_device().

However, if an rport loss occurs while a target is being scanned,
it can happen that scsi_remove_target() will be called while the
starget is still in the STARGET_CREATED state.  In this case, the
starget->state will be set to STARGET_REMOVE, and as a result,
scsi_target_reap_ref_release() will take the wrong path.  The end
result is a panic:

[ 1255.356653] Oops: 0000 [#1] SMP
[ 1255.360154] Modules linked in: x86_pkg_temp_thermal kvm_intel kvm irqbypass crc32c_intel ghash_clmulni_i
[ 1255.393234] CPU: 5 PID: 149 Comm: kworker/u96:4 Tainted: G        W       4.11.0+ #8
[ 1255.401879] Hardware name: Dell Inc. PowerEdge R320/08VT7V, BIOS 2.0.22 11/19/2013
[ 1255.410327] Workqueue: scsi_wq_6 fc_scsi_scan_rport [scsi_transport_fc]
[ 1255.417720] task: ffff88060ca8c8c0 task.stack: ffffc900048a8000
[ 1255.424331] RIP: 0010:kernfs_find_ns+0x13/0xc0
[ 1255.429287] RSP: 0018:ffffc900048abbf0 EFLAGS: 00010246
[ 1255.435123] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 1255.443083] RDX: 0000000000000000 RSI: ffffffff8188d659 RDI: 0000000000000000
[ 1255.451043] RBP: ffffc900048abc10 R08: 0000000000000000 R09: 0000012433fe0025
[ 1255.459005] R10: 0000000025e5a4b5 R11: 0000000025e5a4b5 R12: ffffffff8188d659
[ 1255.466972] R13: 0000000000000000 R14: ffff8805f55e5088 R15: 0000000000000000
[ 1255.474931] FS:  0000000000000000(0000) GS:ffff880616b40000(0000) knlGS:0000000000000000
[ 1255.483959] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1255.490370] CR2: 0000000000000068 CR3: 0000000001c09000 CR4: 00000000000406e0
[ 1255.498332] Call Trace:
[ 1255.501058]  kernfs_find_and_get_ns+0x31/0x60
[ 1255.505916]  sysfs_unmerge_group+0x1d/0x60
[ 1255.510498]  dpm_sysfs_remove+0x22/0x60
[ 1255.514783]  device_del+0xf4/0x2e0
[ 1255.518577]  ? device_remove_file+0x19/0x20
[ 1255.523241]  attribute_container_class_device_del+0x1a/0x20
[ 1255.529457]  transport_remove_classdev+0x4e/0x60
[ 1255.534607]  ? transport_add_class_device+0x40/0x40
[ 1255.540046]  attribute_container_device_trigger+0xb0/0xc0
[ 1255.546069]  transport_remove_device+0x15/0x20
[ 1255.551025]  scsi_target_reap_ref_release+0x25/0x40
[ 1255.556467]  scsi_target_reap+0x2e/0x40
[ 1255.560744]  __scsi_scan_target+0xaa/0x5b0
[ 1255.565312]  scsi_scan_target+0xec/0x100
[ 1255.569689]  fc_scsi_scan_rport+0xb1/0xc0 [scsi_transport_fc]
[ 1255.576099]  process_one_work+0x14b/0x390
[ 1255.580569]  worker_thread+0x4b/0x390
[ 1255.584651]  kthread+0x109/0x140
[ 1255.588251]  ? rescuer_thread+0x330/0x330
[ 1255.592730]  ? kthread_park+0x60/0x60
[ 1255.596815]  ret_from_fork+0x29/0x40
[ 1255.600801] Code: 24 08 48 83 42 40 01 5b 41 5c 5d c3 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90
[ 1255.621876] RIP: kernfs_find_ns+0x13/0xc0 RSP: ffffc900048abbf0
[ 1255.628479] CR2: 0000000000000068
[ 1255.632756] ---[ end trace 34a69ba0477d036f ]---

Fix this by adding another scsi_target state STARGET_CREATED_REMOVE
to distinguish this case.

Fixes: f05795d3d771 ("scsi: Add intermediate STARGET_REMOVE state to scsi_target_state")
Reported-by: David Jeffery 
Signed-off-by: Ewan D. Milne 
Reviewed-by: Laurence Oberman 
Tested-by: Laurence Oberman 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman