Pull SCSI fixes from James Bottomley: "Two core changes and the rest in drivers, one core change to quirk the behaviour of the Iomega Zip drive and one to fix a hang caused by tag reallocation problems, which has mostly been seen by the iscsi client. Note the latter fixes the problem but still has a slight sysfs memory leak, so will be amended in the next pull request (once we've run the fix for the fix through our testing)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: Fix recursive locking in __configfs_open_file() scsi: devinfo: Add BLIST_SKIP_IO_HINTS for Iomega ZIP scsi: mpi3mr: Clear reset history on ready and recheck state after timeout scsi: core: Fix refcount leak for tagset_refcnt
Pull xen fixes from Juergen Gross: - a cleanup of arch/x86/kernel/head_64.S removing the pre-built page tables for Xen guests - a small comment update - another cleanup for Xen PVH guests mode - fix an issue with Xen PV-devices backed by driver domains * tag 'for-linus-7.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: better handle backend crash xenbus: add xenbus_device parameter to xenbus_read_driver_state() x86/PVH: Use boot params to pass RSDP address in start_info page x86/xen: update outdated comment xen/acpi-processor: fix _CST detection using undersized evaluation buffer x86/xen: Build identity mapping page tables dynamically for XENPV
In order to prepare checking the xenbus device status in xenbus_read_driver_state(), add the pointer to struct xenbus_device as a parameter. Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> # SCSI Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/xen-pcifront.c Signed-off-by: Juergen Gross <jgross@suse.com> Message-ID: <20260218095205.453657-2-jgross@suse.com>
The Iomega ZIP 100 (Z100P2) can't process IO Advice Hints Grouping mode
page query. It immediately switches to the status phase 0xb8 after
receiving the subpage code 0x05 of MODE_SENSE_10 command, which fails
imm_out() and turns into DID_ERROR of this command, which leads to unusable
device. This was tested with an Iomega ZIP 100 (Z100P2) connected with a
StarTech PEX1P2 AX99100 PCIe parallel port card.
Prior to this fix, Test Unit Ready fails and the drive can't be used:
IMM: returned SCSI status b8
sd 7:0:6:0: [sdh] Test Unit Ready failed: Result: hostbyte=0x01 driverbyte=DRIVER_OK
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/20260227181823.892932-1-fuchsfl@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver retains reset history even after the IOC has successfully reached the READY state. That leaves stale reset information active during normal operation and can mislead recovery and diagnostics. In addition, if the IOC becomes READY just as the ready timeout loop exits, the driver still follows the failure path and may retry or report failure incorrectly. Clear reset history once READY is confirmed so driver state matches actual IOC status. After the timeout loop, recheck the IOC state and treat READY as success instead of failing. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://patch.msgid.link/20260225082622.82588-1-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This leak will cause a hang when tearing down the SCSI host. For example,
iscsid hangs with the following call trace:
[130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
PID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid"
#0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4
#1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f
#2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0
#3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f
#4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b
#5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp]
#6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi]
#7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi]
#8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6
#9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef
Fixes: 8fe4ce5836e9 ("scsi: core: Fix a use-after-free")
Cc: stable@vger.kernel.org
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223232728.93350-1-junxiao.bi@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull in remaining fixes from 7.0/scsi-queue. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>