linux-toradex.git/drivers/serial/dz.h, branch v2.6.34.8 Linux kernel for Apalis and Colibri modules dz: clean up and improve the setup of termios settings 2008-02-07T16:42:24+00:00 Maciej W. Rozycki macro@linux-mips.org 2008-02-07T08:15:14+00:00 ff11d0780376a3821d790a6ceb8b297d976b14fe A set of changes to the way termios settings are propagated to the serial port hardware. The DZ11 only supports a selection of fixed baud settings, so some requests may not be fulfilled. Keep the old setting in such a case and failing that resort to 9600bps. Also add a missing update of the transmit timeout. And remove the explicit encoding of the line selected from writes to the Line Parameters Register as it has been preencoded by the ->set_termios() call already. Finally, remove a duplicate macro for the Receiver Enable bit. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
A set of changes to the way termios settings are propagated to the serial
port hardware.  The DZ11 only supports a selection of fixed baud settings,
so some requests may not be fulfilled.  Keep the old setting in such a case
and failing that resort to 9600bps.  Also add a missing update of the
transmit timeout.  And remove the explicit encoding of the line selected
from writes to the Line Parameters Register as it has been preencoded by
the ->set_termios() call already.  Finally, remove a duplicate macro for
the Receiver Enable bit.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dz: handle special conditions on reception correctly 2008-02-07T16:42:24+00:00 Maciej W. Rozycki macro@linux-mips.org 2008-02-07T08:15:12+00:00 54c0f37e9a200d74ec43cffa6526d9ad17a388a7 Handle the read and ignore status masks correctly. Handle the BREAK condition as expected: a framing error with a null character is a BREAK, any other framing error is a framing error indeed. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Handle the read and ignore status masks correctly.  Handle the BREAK condition
as expected: a framing error with a null character is a BREAK, any other
framing error is a framing error indeed.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dz.h: remove useless unused module junk 2008-02-07T16:42:24+00:00 Maciej W. Rozycki macro@linux-mips.org 2008-02-07T08:15:06+00:00 d4dd1467f2053b31e2fbb58763ff9d1e0399af45 Remove unused module function prototypes that would not even build if enabled. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Remove unused module function prototypes that would not even build if enabled.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[PATCH] dz: Fixes to make it work 2006-12-07T16:39:41+00:00 Maciej W. Rozycki macro@linux-mips.org 2006-12-07T04:38:59+00:00 9399575dd30edcb84e821583daf81d4ba774a95b This a set of fixes mostly to make the driver actually work: 1. Actually select the line for setting parameters and receiver disable/enable. 2. Select the line for receive and transmit interrupt handling correctly. 3. Report the transmitter empty state correctly. 4. Set the I/O type of ports correctly. 5. Perform polled transmission correctly. 6. Don't fix the console line at ttyS3. 7. Magic SysRq support. 8. Various small bits here and there. Tested with a DECstation 2100 (thanks Flo for making this possible). [akpm@osdl.org: fix typo] Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 
This a set of fixes mostly to make the driver actually work:

1. Actually select the line for setting parameters and receiver
   disable/enable.
2. Select the line for receive and transmit interrupt handling correctly.
3. Report the transmitter empty state correctly.
4. Set the I/O type of ports correctly.
5. Perform polled transmission correctly.
6. Don't fix the console line at ttyS3.
7. Magic SysRq support.
8. Various small bits here and there.

Tested with a DECstation 2100 (thanks Flo for making this possible).

[akpm@osdl.org: fix typo]
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linux-2.6.12-rc2 2005-04-16T22:20:36+00:00 Linus Torvalds torvalds@ppc970.osdl.org 2005-04-16T22:20:36+00:00 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!