linux-toradex.git/drivers/serial/sn_console.c, branch v2.6.34.8

serial: kill off uart_info

2009-09-19T20:13:28+00:00

We moved this into uart_state, now move the fields out of the separate
structure and kill it off.

Signed-off-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

Altix serial: fix

2008-10-20T15:52:36+00:00

In function sn_sal_switch_to_asynch(): drivers/serial/sn_console.c:713:

HZ * SN_SAL_UART_FIFO_DEPTH / SN_SAL_UART_FIFO_SPEED_CPS;

After preprocessing (see defines in patch) this becomes HZ * 16 / 9600 / 10
(associativity from left to right), not equivalent to HZ * 16 / 960.

Looks-obviously-right-to: Tony Luck 
Cc: Jes Sorensen 
Acked-by: Pat Gefre 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

- Fix compile errors in SGI console drivers (linux-next tree)

2008-07-21T00:12:36+00:00

Fix compile errors in SGI console drivers caused by changes to the
tty_port structures in the linux-next tree.

Signed-off-by: Jack Steiner 
Acked-by: Alan Cox 
Signed-off-by: Linus Torvalds

serial: replace remaining FUNCTION occurrences

2008-04-30T15:29:54+00:00

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

sn_console section mismatch warning

2007-07-16T16:05:53+00:00

Do not mark sn_sal_console_setup as __init since it's referenced from
non init data structures.

Signed-off-by: Jes Sorensen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] 2.6 Altix: console fix for CONFIG_DEBUG_SHIRQ usage

2007-03-08T15:39:15+00:00

The sn console driver was snagged by the use of CONFIG_DEBUG_SHIRQ!

The request_irq() immediate call to the interrupt handler caused
another attempt to lock the port lock - deadlock.

This is a patch to fix that.

Signed-off-by: Patrick Gefre 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] tty: switch to ktermios

2006-12-08T16:28:57+00:00

This is the grungy swap all the occurrences in the right places patch that
goes with the updates.  At this point we have the same functionality as
before (except that sgttyb() returns speeds not zero) and are ready to
begin turning new stuff on providing nobody reports lots of bugs

If you are a tty driver author converting an out of tree driver the only
impact should be termios->ktermios name changes for the speed/property
setting functions from your upper layers.

If you are implementing your own TCGETS function before then your driver
was broken already and its about to get a whole lot more painful for you so
please fix it 8)

Also fill in c_ispeed/ospeed on init for most devices, although the current
code will do this for you anyway but I'd like eventually to lose that extra
paranoia

[akpm@osdl.org: bluetooth fix]
[mp3@de.ibm.com: sclp fix]
[mp3@de.ibm.com: warning fix for tty3270]
[hugh@veritas.com: fix tty_ioctl powerpc build]
[jdike@addtoit.com: uml: fix ->set_termios declaration]
Signed-off-by: Alan Cox 
Signed-off-by: Martin Peschke 
Acked-by: Peter Oberparleiter 
Cc: Cornelia Huck 
Signed-off-by: Hugh Dickins 
Signed-off-by: Jeff Dike 
Cc: Paolo 'Blaisorblade' Giarrusso 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[IA64] Fix breakage from irq change

2006-10-06T17:09:41+00:00

A few missed spots in ia64-land from this gigantic commit:

7d12e780e003f93433d49ce78cfedf4b4c52adc5

Signed-off-by: Tony Luck

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05T14:10:12+00:00

Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells 
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

[PATCH] irq-flags: serial: Use the new IRQF_ constants

2006-07-02T20:58:53+00:00

Signed-off-by: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: "David S. Miller" 
Cc: Benjamin Herrenschmidt 
Cc: Russell King 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds