linux-toradex.git/drivers/serial/sunhv.c, branch v2.6.32-rc3

serial: kill off uart_info

2009-09-19T20:13:28+00:00

We moved this into uart_state, now move the fields out of the separate
structure and kill it off.

Signed-off-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

serial: fix off by one errors

2009-06-22T18:32:23+00:00

In zs_console_putchar() occurs:

	if (zs_transmit_drain(zport, irq))
		write_zsdata(zport, ch);

However if in zs_transmit_drain() no empty Tx Buffer occurs, limit reaches
-1 => true, and the write still occurs.

This patch changes postfix to prefix decrements in this and similar
functions to prevent similar mistakes in the future.  This decreases the
iterations with one but the chosen loop count was arbitrary anyway.

In sunhv limit reaches -1, not 0, so the test is off by one.

Signed-off-by: Roel Kluin 
Acked-by: David S. Miller 
Acked-by: Maciej W. Rozycki 
Signed-off-by: Andrew Morton 
Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds

sparc: Annotate of_device_id arrays with const or __initdata.

2008-08-31T08:23:17+00:00

As suggested by Stephen Rothwell.

Signed-off-by: David S. Miller

sparc/drivers: use linux/of_device.h instead of asm/of_device.h

2008-08-11T21:30:53+00:00

Signed-off-by: Stephen Rothwell 
Signed-off-by: David S. Miller

ttydev: fix pamc_zilog for tty pointer move

2008-07-21T00:12:35+00:00

Today's linux-next build (sparc64 defconfig) failed like this:

drivers/serial/sunhv.c: In function `receive_chars':
drivers/serial/sunhv.c:188: error: structure has no member named `tty'
drivers/serial/sunsu.c: In function `receive_chars':
drivers/serial/sunsu.c:314: error: structure has no member named `tty'
drivers/serial/sunsab.c: In function `receive_chars':
drivers/serial/sunsab.c:121: error: structure has no member named `tty'

I applied the following patch (which, again, may not be correct).

Signed-off-by: Stephen Rothwell 
Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds

sunhv: Fix locking in non-paged I/O case.

2008-05-21T06:42:09+00:00

This causes the lock to be taken twice, thus resulting in
a deadlock.

Signed-off-by: David S. Miller

serial: Fix sparc driver name strings.

2008-05-02T12:22:51+00:00

They were all "serial" so if multiple of these drivers registered,
we'd trigger sysfs directory creation errors:

[    1.695793] proc_dir_entry 'serial' already registered
[    1.695839] Call Trace:
[    1.831891]  [00000000004f2534] create_proc_entry+0x7c/0x98
[    1.833608]  [00000000004f3a58] proc_tty_register_driver+0x40/0x70
[    1.833663]  [0000000000594700] tty_register_driver+0x1fc/0x208
[    1.835371]  [00000000005aade4] uart_register_driver+0x134/0x16c
[    1.841762]  [00000000005ac274] sunserial_register_minors+0x34/0x68
[    1.841818]  [00000000007db2a4] sunsu_init+0xf8/0x150
[    1.867697]  [00000000007c62a4] kernel_init+0x190/0x330
[    1.939147]  [0000000000426cf8] kernel_thread+0x38/0x48
[    1.939198]  [00000000006a0d90] rest_init+0x18/0x5c

Signed-off-by: David S. Miller

[SERIAL] sparc: Infrastructure to fix section mismatch bugs.

2007-12-12T15:36:34+00:00

This patch against 2.6.23 sparc-2.6.git contains a number of minor
cleanups of the sparc serial drivers.  Initially I fixed this build
warning:

WARNING: vmlinux.o(.text+0x107a2c): Section mismatch: reference to .init.text:add_preferred_console (between 'sunserial_console_match' and 'sunserial_console_termios')

which is done by declaring sunserial_console_match() as __init.  This
resulted in build warnings on sunserial_current_minor.  To resolve
these the variable was changed so it is no longer global, and to hide
operations on it inside 2 new functions. These functions handle the
UART minor handling code that is common to all sparc serial drivers.

These changes allowed to clean up the uart counters in all the sparc
serial drivers, and the administration of minor device numbers.

Lastly, sunserial_console_termios() does not need to be exported since
it is only called from non-modular code.

Sadly, the following build warning still exists:

WARNING: vmlinux.o(__ksymtab+0x2910): Section mismatch: reference to .init.text:sunserial_console_match (between '__ksymtab_sunserial_console_match' and '__ksymtab_sunserial_unregister_minors')

This could be resolved by not exporting sunserial_console_match(), but
this is not possible at the moment because it is being called from
modular code. On the other hand, this is a bogus warning since it
comes from a ksymtab section.

Signed-off-by: Martin Habets 
Signed-off-by: David S. Miller

[SPARC]: Fix serial console device detection.

2007-07-20T23:59:26+00:00

The current scheme works on static interpretation of text names, which
is wrong.

The output-device setting, for example, must be resolved via an alias
or similar to a full path name to the console device.

Paths also contain an optional set of 'options', which starts with a
colon at the end of the path.  The option area is used to specify
which of two serial ports ('a' or 'b') the path refers to when a
device node drives multiple ports.  'a' is assumed if the option
specification is missing.

This was caught by the UltraSPARC-T1 simulator.  The 'output-device'
property was set to 'ttya' and we didn't pick upon the fact that this
is an OBP alias set to '/virtual-devices/console'.  Instead we saw it
as the first serial console device, instead of the hypervisor console.

The infrastructure is now there to take advantage of this to resolve
the console correctly even in multi-head situations in fbcon too.

Thanks to Greg Onufer for the bug report.

Signed-off-by: David S. Miller

[SERIAL] SUNHV: Fix jerky console on LDOM guests.

2007-07-17T00:12:00+00:00

Mixing putchar() and write() hvcalls does not work %100
correctly.  But we should be using write() all the time
if we can, even from ->start_tx(), anyways.

Signed-off-by: David S. Miller