<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/drivers/serial, branch v2.6.27.12</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>atmel_serial: update the powersave handler to match serial core</title>
<updated>2008-09-23T15:09:14+00:00</updated>
<author>
<name>Anti Sullin</name>
<email>anti.sullin@artecdesign.ee</email>
</author>
<published>2008-09-22T20:57:54+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=f05596dbc922276ed675c713519220bae8042e32'/>
<id>f05596dbc922276ed675c713519220bae8042e32</id>
<content type='text'>
This problem seems to be unnoticed so far:

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b3b708fa2780cd2b5d8266a8f0c3a1cab364d4d2

has changed the serial core behavior to not to suspend the port if the
device is enabled as a wakeup source.  If the AT91 system goes to slow
clock mode, the port should be suspended always and the clocks should be
switched off.  The patch attached updates the atmel_serial driver to match
the changes in serial core.

Also, the interrupts are disabled when the clock is disabled.  If we
disable the clock with interrupts enabled, an interrupt may get stuck.  If
this is the DBGU interrupt, this blocks the OR logic at system controller
and thus all other sysc interrupts.

Signed-off-by: Anti Sullin &lt;anti.sullin@artecdesign.ee&gt;
Signed-off-by: Haavard Skinnemoen &lt;haavard.skinnemoen@atmel.com&gt;
Cc: Michael Trimarchi &lt;trimarchimichael@yahoo.it&gt;
Cc: Andrew Victor &lt;linux@maxim.org.za&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This problem seems to be unnoticed so far:

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b3b708fa2780cd2b5d8266a8f0c3a1cab364d4d2

has changed the serial core behavior to not to suspend the port if the
device is enabled as a wakeup source.  If the AT91 system goes to slow
clock mode, the port should be suspended always and the clocks should be
switched off.  The patch attached updates the atmel_serial driver to match
the changes in serial core.

Also, the interrupts are disabled when the clock is disabled.  If we
disable the clock with interrupts enabled, an interrupt may get stuck.  If
this is the DBGU interrupt, this blocks the OR logic at system controller
and thus all other sysc interrupts.

Signed-off-by: Anti Sullin &lt;anti.sullin@artecdesign.ee&gt;
Signed-off-by: Haavard Skinnemoen &lt;haavard.skinnemoen@atmel.com&gt;
Cc: Michael Trimarchi &lt;trimarchimichael@yahoo.it&gt;
Cc: Andrew Victor &lt;linux@maxim.org.za&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'for-rmk' of git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6.git</title>
<updated>2008-09-13T19:11:15+00:00</updated>
<author>
<name>Russell King</name>
<email>rmk@dyn-67.arm.linux.org.uk</email>
</author>
<published>2008-09-13T19:10:59+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=68ddb1d963c44da913b0331b633828c48206351b'/>
<id>68ddb1d963c44da913b0331b633828c48206351b</id>
<content type='text'>
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
</pre>
</div>
</content>
</entry>
<entry>
<title>8250: improve workaround for UARTs that don't re-assert THRE correctly</title>
<updated>2008-09-03T02:21:38+00:00</updated>
<author>
<name>Will Newton</name>
<email>will.newton@gmail.com</email>
</author>
<published>2008-09-02T21:35:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=363f66fe06c75270b669c88e321e6b354ba0201e'/>
<id>363f66fe06c75270b669c88e321e6b354ba0201e</id>
<content type='text'>
Recent changes to tighten the check for UARTs that don't correctly
re-assert THRE (01c194d9278efc15d4785ff205643e9c0bdcef53: "serial 8250:
tighten test for using backup timer") caused problems when such a UART was
opened for the second time - the bug could only successfully be detected
at first initialization.  For users of this version of this particular
UART IP it is fatal.

This patch stores the information about the bug in the bugs field of the
port structure when the port is first started up so subsequent opens can
check this bit even if the test for the bug fails.

David Brownell: "My own exposure to this is that the UART on DaVinci
hardware, which TI allegedly derived from its original 16550 logic, has
periodically gone from working to unusable with the mainline 8250.c ...
and back and forth a bunch.  Currently it's "unusable", a regression from
some previous versions.  With this patch from Will, it's usable."

Signed-off-by: Will Newton &lt;will.newton@gmail.com&gt;
Acked-by: Alex Williamson &lt;alex.williamson@hp.com&gt;
Cc: Alan Cox &lt;alan@lxorguk.ukuu.org.uk&gt;
Cc: David Brownell &lt;david-b@pacbell.net&gt;
Cc: &lt;stable@kernel.org&gt;		[2.6.26.x]
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Recent changes to tighten the check for UARTs that don't correctly
re-assert THRE (01c194d9278efc15d4785ff205643e9c0bdcef53: "serial 8250:
tighten test for using backup timer") caused problems when such a UART was
opened for the second time - the bug could only successfully be detected
at first initialization.  For users of this version of this particular
UART IP it is fatal.

This patch stores the information about the bug in the bugs field of the
port structure when the port is first started up so subsequent opens can
check this bit even if the test for the bug fails.

David Brownell: "My own exposure to this is that the UART on DaVinci
hardware, which TI allegedly derived from its original 16550 logic, has
periodically gone from working to unusable with the mainline 8250.c ...
and back and forth a bunch.  Currently it's "unusable", a regression from
some previous versions.  With this patch from Will, it's usable."

Signed-off-by: Will Newton &lt;will.newton@gmail.com&gt;
Acked-by: Alex Williamson &lt;alex.williamson@hp.com&gt;
Cc: Alan Cox &lt;alan@lxorguk.ukuu.org.uk&gt;
Cc: David Brownell &lt;david-b@pacbell.net&gt;
Cc: &lt;stable@kernel.org&gt;		[2.6.26.x]
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>imx serial: fix rts handling for non imx1 based hardware</title>
<updated>2008-09-02T08:19:30+00:00</updated>
<author>
<name>Marc Kleine-Budde</name>
<email>mkl@pengutronix.de</email>
</author>
<published>2008-07-28T19:26:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=9fbe604456c5ae21768f1c98379e1b81c72adcd3'/>
<id>9fbe604456c5ae21768f1c98379e1b81c72adcd3</id>
<content type='text'>
The interrupt handler for muxed interrupts (imx2/imx3) was calling
the rts handling subroutine if the RTSS bit was set.
(Which indicates the status of the RTS line), leading to an
interrupt flood on RTS bit low.

This patch fixes the problem by looking at the RTSD bit instead,
indicating a change in the RTS line.

Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
Signed-off-by: Sascha Hauer &lt;s.hauer@pengutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The interrupt handler for muxed interrupts (imx2/imx3) was calling
the rts handling subroutine if the RTSS bit was set.
(Which indicates the status of the RTS line), leading to an
interrupt flood on RTS bit low.

This patch fixes the problem by looking at the RTSD bit instead,
indicating a change in the RTS line.

Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
Signed-off-by: Sascha Hauer &lt;s.hauer@pengutronix.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>imx serial: set RXD mux bit on i.MX27 and i.MX31</title>
<updated>2008-09-02T08:19:29+00:00</updated>
<author>
<name>Marc Kleine-Budde</name>
<email>mkl@pengutronix.de</email>
</author>
<published>2008-07-28T10:10:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=4411805b13d4b8c31870b276c2730d585b062db7'/>
<id>4411805b13d4b8c31870b276c2730d585b062db7</id>
<content type='text'>
RX in i.MX27 and i.MX31 UART lines does not work unless the
"RXD  Muxed Input Select" bit is set on i.MX27 and i.MX31 processors.

This patch sets the missing RXD mux bit in the UCR3 register.

Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
Signed-off-by: Sascha Hauer &lt;s.hauer@pengutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
RX in i.MX27 and i.MX31 UART lines does not work unless the
"RXD  Muxed Input Select" bit is set on i.MX27 and i.MX31 processors.

This patch sets the missing RXD mux bit in the UCR3 register.

Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
Signed-off-by: Sascha Hauer &lt;s.hauer@pengutronix.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>i.MX serial: fix init failure</title>
<updated>2008-09-02T08:19:29+00:00</updated>
<author>
<name>Darius Augulis</name>
<email>augulis.darius@gmail.com</email>
</author>
<published>2008-09-02T08:19:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c45e7d7be891fe94e13d0e7aeee3e0e4ee7118f4'/>
<id>c45e7d7be891fe94e13d0e7aeee3e0e4ee7118f4</id>
<content type='text'>
Adds extra "out" label to probe function after calling .init form platform data.
Because .init can return error number caused by gpio request fail.

Signed-off-by: Darius Augulis &lt;augulis.darius@gmail.com&gt;
Signed-off-by: Sascha Hauer &lt;s.hauer@pengutronix.de&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Adds extra "out" label to probe function after calling .init form platform data.
Because .init can return error number caused by gpio request fail.

Signed-off-by: Darius Augulis &lt;augulis.darius@gmail.com&gt;
Signed-off-by: Sascha Hauer &lt;s.hauer@pengutronix.de&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>Blackfin arch: move include/asm-blackfin header files to arch/blackfin</title>
<updated>2008-08-27T02:51:02+00:00</updated>
<author>
<name>Bryan Wu</name>
<email>cooloney@kernel.org</email>
</author>
<published>2008-08-27T02:51:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=639f6571458948b5112be2cf00c0c2c04db2897d'/>
<id>639f6571458948b5112be2cf00c0c2c04db2897d</id>
<content type='text'>
Signed-off-by: Bryan Wu &lt;cooloney@kernel.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Bryan Wu &lt;cooloney@kernel.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>Merge master.kernel.org:/home/rmk/linux-2.6-arm</title>
<updated>2008-08-16T23:48:45+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2008-08-16T23:48:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=9c0d2a20fe331946c1a65a5865faf56e93255c5c'/>
<id>9c0d2a20fe331946c1a65a5865faf56e93255c5c</id>
<content type='text'>
* master.kernel.org:/home/rmk/linux-2.6-arm: (38 commits)
  [ARM] 5191/1: ARM: remove CVS keywords
  [ARM] pxafb: fix the warning of incorrect lccr when lcd_conn is specified
  [ARM] pxafb: add flag to specify output format on LDD pins when base is RGBT16
  [ARM] pxafb: fix the incorrect configuration of GPIO77 as ACBIAS for TFT LCD
  [ARM] 5198/1: PalmTX: PCMCIA fixes
  [ARM] Fix a pile of broken watchdog drivers
  [ARM] update mach-types
  [ARM] 5196/1: fix inline asm constraints for preload
  [ARM] 5194/1: update .gitignore
  [ARM] add proc-macros.S include to proc-arm940 and proc-arm946
  [ARM] 5192/1: ARM TLB: add v7wbi_{possible,always}_flags to {possible,always}_tlb_flags
  [ARM] 5193/1: Wire up missing syscalls
  [ARM] traps: don't call undef hook functions with spinlock held
  [ARM] 5183/2: Provide Poodle LoCoMo GPIO names
  [ARM] dma-mapping: provide sync_range APIs
  [ARM] dma-mapping: improve type-safeness of DMA translations
  [ARM] Kirkwood: instantiate the orion_spi driver in the platform code
  [ARM] prevent crashing when too much RAM installed
  [ARM] Kirkwood: Instantiate mv_xor driver
  [ARM] Orion: Instantiate mv_xor driver for 5182
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
* master.kernel.org:/home/rmk/linux-2.6-arm: (38 commits)
  [ARM] 5191/1: ARM: remove CVS keywords
  [ARM] pxafb: fix the warning of incorrect lccr when lcd_conn is specified
  [ARM] pxafb: add flag to specify output format on LDD pins when base is RGBT16
  [ARM] pxafb: fix the incorrect configuration of GPIO77 as ACBIAS for TFT LCD
  [ARM] 5198/1: PalmTX: PCMCIA fixes
  [ARM] Fix a pile of broken watchdog drivers
  [ARM] update mach-types
  [ARM] 5196/1: fix inline asm constraints for preload
  [ARM] 5194/1: update .gitignore
  [ARM] add proc-macros.S include to proc-arm940 and proc-arm946
  [ARM] 5192/1: ARM TLB: add v7wbi_{possible,always}_flags to {possible,always}_tlb_flags
  [ARM] 5193/1: Wire up missing syscalls
  [ARM] traps: don't call undef hook functions with spinlock held
  [ARM] 5183/2: Provide Poodle LoCoMo GPIO names
  [ARM] dma-mapping: provide sync_range APIs
  [ARM] dma-mapping: improve type-safeness of DMA translations
  [ARM] Kirkwood: instantiate the orion_spi driver in the platform code
  [ARM] prevent crashing when too much RAM installed
  [ARM] Kirkwood: Instantiate mv_xor driver
  [ARM] Orion: Instantiate mv_xor driver for 5182
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6</title>
<updated>2008-08-14T03:48:25+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2008-08-14T03:48:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=0ff8285075a1242dbc969b6b4b1719d692931a02'/>
<id>0ff8285075a1242dbc969b6b4b1719d692931a02</id>
<content type='text'>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Handle stack trace attempts before irqstacks are setup.
  sparc64: Implement IRQ stacks.
  sparc: remove include of linux/of_device.h from asm/of_device.h
  sparc64: Fix recursion in stack overflow detection handling.
  sparc/drivers: use linux/of_device.h instead of asm/of_device.h
  sparc64: Don't MAGIC_SYSRQ ifdef smp_fetch_global_regs and support code.
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Handle stack trace attempts before irqstacks are setup.
  sparc64: Implement IRQ stacks.
  sparc: remove include of linux/of_device.h from asm/of_device.h
  sparc64: Fix recursion in stack overflow detection handling.
  sparc/drivers: use linux/of_device.h instead of asm/of_device.h
  sparc64: Don't MAGIC_SYSRQ ifdef smp_fetch_global_regs and support code.
</pre>
</div>
</content>
</entry>
<entry>
<title>sparc/drivers: use linux/of_device.h instead of asm/of_device.h</title>
<updated>2008-08-11T21:30:53+00:00</updated>
<author>
<name>Stephen Rothwell</name>
<email>sfr@canb.auug.org.au</email>
</author>
<published>2008-08-11T21:30:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c6ed413ddcfb66e9d3e1318060271391c7659dd3'/>
<id>c6ed413ddcfb66e9d3e1318060271391c7659dd3</id>
<content type='text'>
Signed-off-by: Stephen Rothwell &lt;sfr@canb.auug.org.au&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Stephen Rothwell &lt;sfr@canb.auug.org.au&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
</feed>
