This patch moves Exynos PMU driver implementation from "arm/mach-exynos"
to "drivers/soc/samsung". This driver is mainly used for setting misc
bits of register from PMU IP of Exynos SoC which will be required to
configure before Suspend/Resume. Currently all these settings are done
in "arch/arm/mach-exynos/pmu.c" but moving ahead for ARM64 based SoC
support, there is a need of this PMU driver in driver/* folder.

This driver uses existing DT binding information and there should
be no functionality change in the supported platforms.

Signed-off-by: Amit Daniel Kachhap <amitdanielk@gmail.com>
[tested on Peach-Pi (Exynos5880)]
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[for testing on Trats2 (Exynos4412) and Odroid XU3 (Exynos5422)]
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[k.kozlowski: Rebased, add necessary infrastructure for building and
selecting drivers/soc because original patchset was on top of movement
SROMc to drivers/soc]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Pull ARM SoC support for Tegra platforms from Olof Johansson:
 "Here's a single-SoC topic branch that we've staged separately.  Mainly
  because it was hard to sort the branch contents in a way that fit our
  existing branches due to some refactorings.

  The code has been in -next for quite a while, but we staged it in
  arm-soc a bit late, which is why we've kept it separate from the other
  updates and are sending it separately here"

* tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support
  arm64: tegra: Add NVIDIA P2597 I/O board support
  arm64: tegra: Add NVIDIA Jetson TX1 support
  arm64: tegra: Add NVIDIA P2571 board support
  arm64: tegra: Add NVIDIA P2371 board support
  arm64: tegra: Add NVIDIA P2595 I/O board support
  arm64: tegra: Add NVIDIA P2530 main board support
  arm64: tegra: Add Tegra210 support
  arm64: tegra: Add NVIDIA Tegra132 Norrin support
  arm64: tegra: Add Tegra132 support
  ARM: tegra: select USB_ULPI from EHCI rather than platform
  ARM: tegra: Ensure entire dcache is flushed on entering LP0/1
  amba: Hide TEGRA_AHB symbol
  soc/tegra: Add Tegra210 support
  soc/tegra: Provide per-SoC Kconfig symbols

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.  Some for SoC-family code under
  drivers/soc, but also some other driver updates that don't belong
  anywhere else.  We also bring in the drivers/reset code through
  arm-soc.

  Some of the larger updates:

   - Qualcomm support for SMEM, SMSM, SMP2P.  All used to communicate
     with other parts of the chip/board on these platforms, all
     proprietary protocols that don't fit into other subsystems and live
     in drivers/soc for now.

   - System bus driver for UniPhier

   - Driver for the TI Wakeup M3 IPC device

   - Power management for Raspberry PI

  + Again a bunch of other smaller updates and patches"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  bus: uniphier: allow only built-in driver
  ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency
  MAINTAINERS: Drop Kumar Gala from QCOM
  bus: uniphier-system-bus: add UniPhier System Bus driver
  ARM: bcm2835: add rpi power domain driver
  dt-bindings: add rpi power domain driver bindings
  ARM: bcm2835: Define two new packets from the latest firmware.
  drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular
  soc: mediatek: SCPSYS: Add regulator support
  MAINTAINERS: Change QCOM entries
  soc: qcom: smd-rpm: Add existing platform support
  memory/tegra: Add number of TLB lines for Tegra124
  reset: hi6220: fix modular build
  soc: qcom: Introduce WCNSS_CTRL SMD client
  ARM: qcom: select ARM_CPU_SUSPEND for power management
  MAINTAINERS: Add rules for Qualcomm dts files
  soc: qcom: enable smsm/smp2p modular build
  serial: msm_serial: Make config tristate
  soc: qcom: smp2p: Qualcomm Shared Memory Point to Point
  soc: qcom: smsm: Add driver for Qualcomm SMSM
  ...

ls1 has qe and ls1 has arm cpu.
move qe from arch/powerpc to drivers/soc/fsl
to adapt to powerpc and arm

Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

This patch adds support for several power domains on Raspberry Pi,
including USB (so it can be enabled even if the bootloader didn't do
it), and graphics.

This patch is the combined work of Eric Anholt (who wrote USB support
inside of the Raspberry Pi firmware driver, and wrote the non-USB
domain support) and Alexander Aring (who separated the original USB
work out from the firmware driver).

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>

Move per-SoC generation Kconfig symbols to drivers/soc/tegra/Kconfig to
gather them all in a single place. This directory is a natural location
for these options since it already contains the drivers that are shared
across 32-bit and 64-bit ARM architectures.

Signed-off-by: Thierry Reding <treding@nvidia.com>

Pull ARM SoC driver updates from Olof Johansson:
 "As we've enabled multiplatform kernels on ARM, and greatly done away
  with the contents under arch/arm/mach-*, there's still need for
  SoC-related drivers to go somewhere.

  Many of them go in through other driver trees, but we still have
  drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
  that might be shared between ARM and ARM64 (or just in general makes
  sense to not have under the architecture directory).

  This branch contains mostly such code:

   - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
     communicate with power management blocks on these SoCs for use by
     clock, regulator and bus frequency drivers.

   - Allwinner Reduced Serial Bus driver, again used to communicate with
     PMICs.

   - Drivers for ARM's SCPI (System Control Processor).  Not to be
     confused with PSCI (Power State Coordination Interface).  SCPI is
     used to communicate with the assistant embedded cores doing power
     management, and we have yet to see how many of them will implement
     this for their hardware vs abstracting in other ways (or not at all
     like in the past).

   - To make confusion between SCPI and PSCI more likely, this release
     also includes an update of PSCI to interface version 1.0.

   - Rockchip support for power domains.

   - A driver to talk to the firmware on Raspberry Pi"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
  soc: qcom: smd-rpm: Correct size of outgoing message
  bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
  bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
  ARM: bcm2835: add mutual inclusion protection
  drivers: psci: make PSCI 1.0 functions initialization version dependent
  dt-bindings: Correct paths in Rockchip power domains binding document
  soc: rockchip: power-domain: don't try to print the clock name in error case
  soc: qcom/smem: add HWSPINLOCK dependency
  clk: berlin: add cpuclk
  ARM: berlin: dts: add CLKID_CPU for BG2Q
  ARM: bcm2835: Add the Raspberry Pi firmware driver
  soc: qcom: smem: Move RPM message ram out of smem DT node
  soc: qcom: smd-rpm: Correct the active vs sleep state flagging
  soc: qcom: smd: delete unneeded of_node_put
  firmware: qcom-scm: build for correct architecture level
  soc: qcom: smd: Correct SMEM items for upper channels
  qcom-scm: add missing prototype for qcom_scm_is_available()
  qcom-scm: fix endianess issue in __qcom_scm_is_call_available
  soc: qcom: smd: Reject send of too big packets
  soc: qcom: smd: Handle big endian CPUs
  ...

This driver is found on RK3288 SoCs.

In order to meet high performance and low power requirements, a power
management unit is designed or saving power when RK3288 in low power
mode.
The RK3288 PMU is dedicated for managing the power of the whole chip.

PMU can work in the Low Power Mode by setting bit[0] of PMU_PWRMODE_CON
register. After setting the register, PMU would enter the Low Power mode.
In the low power mode, pmu will auto power on/off the specified power
domain, send idle req to specified power domain, shut down/up pll and
so on. All of above are configurable by setting corresponding registers.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>

[replace dsb() with dsb(sy) for arm64 buildability; sy is the default,
so no functional change; adapt to per-user clocks in genpd]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Used on BCM7xxx Set-Top Box chips (e.g., BCM7445).

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

The Allwinner SoCs have a handful of SRAM that can be either mapped to be
accessible by devices or the CPU.

That mapping is controlled by an SRAM controller, and that mapping might
not be set by the bootloader, for example if the device wasn't used at all,
or if we're using solutions like the U-Boot's Falcon Boot.

We could also imagine changing this at runtime for example to change the
mapping of these SRAMs to use them for suspend/resume or runtime memory
rate change, if that ever happens.

These use cases require some API in the kernel to control that mapping,
exported through a drivers/soc driver.

This driver also implement a debugfs file that shows the SRAM found in the
system, the current mapping and the SRAM that have been claimed by some
drivers in the kernel.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>