linux-toradex.git/drivers/soc/fsl, branch v6.9-rc4

Merge tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-03-21T21:50:39+00:00

Pull networking fixes from Jakub Kicinski:
 "Including fixes from CAN, netfilter, wireguard and IPsec.

  I'd like to highlight [ lowlight? - Linus ] Florian W stepping down as
  a netfilter maintainer due to constant stream of bug reports. Not sure
  what we can do but IIUC this is not the first such case.

  Current release - regressions:

   - rxrpc: fix use of page_frag_alloc_align(), it changed semantics and
     we added a new caller in a different subtree

   - xfrm: allow UDP encapsulation only in offload modes

  Current release - new code bugs:

   - tcp: fix refcnt handling in __inet_hash_connect()

   - Revert "net: Re-use and set mono_delivery_time bit for userspace
     tstamp packets", conflicted with some expectations in BPF uAPI

  Previous releases - regressions:

   - ipv4: raw: fix sending packets from raw sockets via IPsec tunnels

   - devlink: fix devlink's parallel command processing

   - veth: do not manipulate GRO when using XDP

   - esp: fix bad handling of pages from page_pool

  Previous releases - always broken:

   - report RCU QS for busy network kthreads (with Paul McK's blessing)

   - tcp/rds: fix use-after-free on netns with kernel TCP reqsk

   - virt: vmxnet3: fix missing reserved tailroom with XDP

  Misc:

   - couple of build fixes for Documentation"

* tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
  selftests: forwarding: Fix ping failure due to short timeout
  MAINTAINERS: step down as netfilter maintainer
  netfilter: nf_tables: Fix a memory leak in nf_tables_updchain
  net: dsa: mt7530: fix handling of all link-local frames
  net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports
  bpf: report RCU QS in cpumap kthread
  net: report RCU QS on threaded NAPI repolling
  rcu: add a helper to report consolidated flavor QS
  ionic: update documentation for XDP support
  lib/bitmap: Fix bitmap_scatter() and bitmap_gather() kernel doc
  netfilter: nf_tables: do not compare internal table flags on updates
  netfilter: nft_set_pipapo: release elements in clone only from destroy path
  octeontx2-af: Use separate handlers for interrupts
  octeontx2-pf: Send UP messages to VF only when VF is up.
  octeontx2-pf: Use default max_active works instead of one
  octeontx2-pf: Wait till detach_resources msg is complete
  octeontx2: Detect the mbox up or down message via register
  devlink: fix port new reply cmd type
  tcp: Clear req->syncookie in reqsk_alloc().
  net/bnx2x: Prevent access to a freed page in page_pool
  ...

Merge tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2024-03-19T18:57:26+00:00

Pull more ARM SoC updates from Arnd Bergmann:
 "These are changes that for some reason ended up not making it into the
  first four branches but that should still make it into 6.9:

   - A rework of the omap clock support that touches both drivers and
     device tree files

   - The reset controller branch changes that had a dependency on late
     bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
     drivers branch

   - The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
     changes that got delayed and needed some extra time in linux-next
     for wider testing"

* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
  soc: fsl: dpio: fix kcalloc() argument order
  bus: ts-nbus: Improve error reporting
  bus: ts-nbus: Convert to atomic pwm API
  riscv: dts: starfive: jh7110: Add camera subsystem nodes
  ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
  ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
  ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
  clk: ti: Improve clksel clock bit parsing for reg property
  clk: ti: Handle possible address in the node name
  dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
  dt-bindings: riscv: cpus: reg matches hart ID
  reset: Instantiate reset GPIO controller for shared reset-gpios
  reset: gpio: Add GPIO-based reset controller
  cpufreq: do not open-code of_phandle_args_equal()
  of: Add of_phandle_args_equal() helper
  reset: simple: add support for Sophgo SG2042
  dt-bindings: reset: sophgo: support SG2042
  riscv: dts: microchip: add specific compatible for mpfs pdma
  riscv: dts: microchip: add missing CAN bus clocks
  ARM: brcmstb: Add debug UART entry for 74165
  ...

soc: fsl: dpio: fix kcalloc() argument order

2024-03-13T16:17:32+00:00

A previous bugfix added a call to kcalloc(), which starting in gcc-14
causes a harmless warning about the argument order:

drivers/soc/fsl/dpio/dpio-service.c: In function 'dpaa2_io_service_enqueue_multiple_desc_fq':
drivers/soc/fsl/dpio/dpio-service.c:526:29: error: 'kcalloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
  526 |         ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
      |                             ^~~~~~
drivers/soc/fsl/dpio/dpio-service.c:526:29: note: earlier argument should specify number of elements, later size of each element

Since the two are only multiplied, the order does not change the
behavior, so just fix it now to shut up the compiler warning.

Dmity independently came up with the same fix.

Fixes: 5c4a5999b245 ("soc: fsl: dpio: avoid stack usage warning")
Reported-by: Dmitry Antipov 
Signed-off-by: Arnd Bergmann

soc: fsl: qbman: Use raw spinlock for cgr_lock

2024-03-13T08:12:02+00:00

smp_call_function always runs its callback in hard IRQ context, even on
PREEMPT_RT, where spinlocks can sleep. So we need to use a raw spinlock
for cgr_lock to ensure we aren't waiting on a sleeping task.

Although this bug has existed for a while, it was not apparent until
commit ef2a8d5478b9 ("net: dpaa: Adjust queue depth on rate change")
which invokes smp_call_function_single via qman_update_cgr_safe every
time a link goes up or down.

Fixes: 96f413f47677 ("soc/fsl/qbman: fix issue in qman_delete_cgr_safe()")
CC: stable@vger.kernel.org
Reported-by: Vladimir Oltean 
Closes: https://lore.kernel.org/all/20230323153935.nofnjucqjqnz34ej@skbuf/
Reported-by: Steffen Trumtrar 
Closes: https://lore.kernel.org/linux-arm-kernel/87wmsyvclu.fsf@pengutronix.de/
Signed-off-by: Sean Anderson 
Reviewed-by: Camelia Groza 
Tested-by: Vladimir Oltean 
Signed-off-by: David S. Miller

soc: fsl: qbman: Always disable interrupts when taking cgr_lock

2024-03-13T08:12:02+00:00

smp_call_function_single disables IRQs when executing the callback. To
prevent deadlocks, we must disable IRQs when taking cgr_lock elsewhere.
This is already done by qman_update_cgr and qman_delete_cgr; fix the
other lockers.

Fixes: 96f413f47677 ("soc/fsl/qbman: fix issue in qman_delete_cgr_safe()")
CC: stable@vger.kernel.org
Signed-off-by: Sean Anderson 
Reviewed-by: Camelia Groza 
Tested-by: Vladimir Oltean 
Signed-off-by: David S. Miller

soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage

2024-03-07T00:30:59+00:00

There is no reason to use RESERVEDMEM_OF_DECLARE() as the initialization
hook just saves off the base address and size. Use of
RESERVEDMEM_OF_DECLARE() is reserved for non-driver code and
initialization which must be done early. For qbman, retrieving the
address and size can be done in probe just as easily.

Link: https://lore.kernel.org/r/20240201192931.1324130-1-robh@kernel.org
Signed-off-by: Rob Herring

soc: fsl: cpm1: qmc: Introduce functions to change timeslots at runtime

2023-12-12T09:29:20+00:00

Introduce qmc_chan_{get,set}_ts_info() function to allow timeslots
modification at runtime.

The modification is provided using qmc_chan_set_ts_info() and will be
applied on next qmc_chan_start().
qmc_chan_set_ts_info() must be called with the channel rx and/or tx
stopped.

Signed-off-by: Herve Codina 
Reviewed-by: Christophe Leroy 
Link: https://lore.kernel.org/r/20231205152116.122512-18-herve.codina@bootlin.com

soc: fsl: cpm1: qmc: Remove timeslots handling from setup_chan()

2023-12-12T09:29:20+00:00

Timeslots setting is done at channel start() and stop().
There is no more need to do that during setup_chan().

Simply remove timeslot setting from setup_chan().

Signed-off-by: Herve Codina 
Reviewed-by: Christophe Leroy 
Link: https://lore.kernel.org/r/20231205152116.122512-17-herve.codina@bootlin.com

soc: fsl: cpm1: qmc: Handle timeslot entries at channel start() and stop()

2023-12-12T09:29:20+00:00

In order to support runtime timeslot route changes, enable the
channel timeslot entries at channel start() and disable them at
channel stop().

Signed-off-by: Herve Codina 
Reviewed-by: Christophe Leroy 
Link: https://lore.kernel.org/r/20231205152116.122512-16-herve.codina@bootlin.com

soc: fsl: cpm1: qmc: Introduce is_tsa_64rxtx flag

2023-12-12T09:29:20+00:00

In order to support runtime timeslot route changes, some operations will
be different according the routing table used (common Rx and Tx table or
one table for Rx and one for Tx).

The is_tsa_64rxtx flag is introduced to avoid extra computation to
determine the table format each time we need it.
It is set once at initialization.

Signed-off-by: Herve Codina 
Reviewed-by: Christophe Leroy 
Link: https://lore.kernel.org/r/20231205152116.122512-15-herve.codina@bootlin.com