Pull networking updates from Paolo Abeni:
 "The most significant set of changes is the per netns RTNL. The new
  behavior is disabled by default, regression risk should be contained.

  Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
  default value from PTP_1588_CLOCK_KVM, as the first is intended to be
  a more reliable replacement for the latter.

  Core:

   - Started a very large, in-progress, effort to make the RTNL lock
     scope per network-namespace, thus reducing the lock contention
     significantly in the containerized use-case, comprising:
       - RCU-ified some relevant slices of the FIB control path
       - introduce basic per netns locking helpers
       - namespacified the IPv4 address hash table
       - remove rtnl_register{,_module}() in favour of
         rtnl_register_many()
       - refactor rtnl_{new,del,set}link() moving as much validation as
         possible out of RTNL lock
       - convert all phonet doit() and dumpit() handlers to RCU
       - convert IPv4 addresses manipulation to per-netns RTNL
       - convert virtual interface creation to per-netns RTNL
     the per-netns lock infrastructure is guarded by the
     CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.

   - Introduce NAPI suspension, to efficiently switching between busy
     polling (NAPI processing suspended) and normal processing.

   - Migrate the IPv4 routing input, output and control path from direct
     ToS usage to DSCP macros. This is a work in progress to make ECN
     handling consistent and reliable.

   - Add drop reasons support to the IPv4 rotue input path, allowing
     better introspection in case of packets drop.

   - Make FIB seqnum lockless, dropping RTNL protection for read access.

   - Make inet{,v6} addresses hashing less predicable.

   - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
     and timestamps

  Things we sprinkled into general kernel code:

   - Add small file operations for debugfs, to reduce the struct ops
     size.

   - Refactoring and optimization for the implementation of page_frag
     API, This is a preparatory work to consolidate the page_frag
     implementation.

  Netfilter:

   - Optimize set element transactions to reduce memory consumption

   - Extended netlink error reporting for attribute parser failure.

   - Make legacy xtables configs user selectable, giving users the
     option to configure iptables without enabling any other config.

   - Address a lot of false-positive RCU issues, pointed by recent CI
     improvements.

  BPF:

   - Put xsk sockets on a struct diet and add various cleanups. Overall,
     this helps to bump performance by 12% for some workloads.

   - Extend BPF selftests to increase coverage of XDP features in
     combination with BPF cpumap.

   - Optimize and homogenize bpf_csum_diff helper for all archs and also
     add a batch of new BPF selftests for it.

   - Extend netkit with an option to delegate skb->{mark,priority}
     scrubbing to its BPF program.

   - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
     programs.

  Protocols:

   - Introduces 4-tuple hash for connected udp sockets, speeding-up
     significantly connected sockets lookup.

   - Add a fastpath for some TCP timers that usually expires after
     close, the socket lock contention.

   - Add inbound and outbound xfrm state caches to speed up state
     lookups.

   - Avoid sending MPTCP advertisements on stale subflows, reducing
     risks on loosing them.

   - Make neighbours table flushing more scalable, maintaining per
     device neigh lists.

  Driver API:

   - Introduce a unified interface to configure transmission H/W
     shaping, and expose it to user-space via generic-netlink.

   - Add support for per-NAPI config via netlink. This makes napi
     configuration persistent across queues removal and re-creation.
     Requires driver updates, currently supported drivers are:
     nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.

   - Add ethtool support for writing SFP / PHY firmware blocks.

   - Track RSS context allocation from ethtool core.

   - Implement support for mirroring to DSA CPU port, via TC mirror
     offload.

   - Consolidate FDB updates notification, to avoid duplicates on
     device-specific entries.

   - Expose DPLL clock quality level to the user-space.

   - Support master-slave PHY config via device tree.

  Tests and tooling:

   - forwarding: introduce deferred commands, to simplify the cleanup
     phase

  Drivers:

   - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
     Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
     IRQs and queues to NAPI IDs, allowing busy polling and better
     introspection.

   - Ethernet high-speed NICs:
      - nVidia/Mellanox:
         - mlx5:
           - a large refactor to implement support for cross E-Switch
             scheduling
           - refactor H/W conter management to let it scale better
           - H/W GRO cleanups
      - Intel (100G, ice)::
         - add support for ethtool reset
         - implement support for per TX queue H/W shaping
      - AMD/Solarflare:
         - implement per device queue stats support
      - Broadcom (bnxt):
         - improve wildcard l4proto on IPv4/IPv6 ntuple rules
      - Marvell Octeon:
         - Add representor support for each Resource Virtualization Unit
           (RVU) device.
      - Hisilicon:
         - add support for the BMC Gigabit Ethernet
      - IBM (EMAC):
         - driver cleanup and modernization
      - Cisco (VIC):
         - raise the queues number limit to 256

   - Ethernet virtual:
      - Google vNIC:
         - implement page pool support
      - macsec:
         - inherit lower device's features and TSO limits when
           offloading
      - virtio_net:
         - enable premapped mode by default
         - support for XDP socket(AF_XDP) zerocopy TX
      - wireguard:
         - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
           packets.

   - Ethernet NICs embedded and virtual:
      - Broadcom ASP:
         - enable software timestamping
      - Freescale:
         - add enetc4 PF driver
      - MediaTek: Airoha SoC:
         - implement BQL support
      - RealTek r8169:
         - enable TSO by default on r8168/r8125
         - implement extended ethtool stats
      - Renesas AVB:
         - enable TX checksum offload
      - Synopsys (stmmac):
         - support header splitting for vlan tagged packets
         - move common code for DWMAC4 and DWXGMAC into a separate FPE
           module.
         - add dwmac driver support for T-HEAD TH1520 SoC
      - Synopsys (xpcs):
         - driver refactor and cleanup
      - TI:
         - icssg_prueth: add VLAN offload support
      - Xilinx emaclite:
         - add clock support

   - Ethernet switches:
      - Microchip:
         - implement support for the lan969x Ethernet switch family
         - add LAN9646 switch support to KSZ DSA driver

   - Ethernet PHYs:
      - Marvel: 88q2x: enable auto negotiation
      - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2

   - PTP:
      - Add support for the Amazon virtual clock device
      - Add PtP driver for s390 clocks

   - WiFi:
      - mac80211
         - EHT 1024 aggregation size for transmissions
         - new operation to indicate that a new interface is to be added
         - support radio separation of multi-band devices
         - move wireless extension spy implementation to libiw
      - Broadcom:
         - brcmfmac: optional LPO clock support
      - Microchip:
         - add support for Atmel WILC3000
      - Qualcomm (ath12k):
         - firmware coredump collection support
         - add debugfs support for a multitude of statistics
      - Qualcomm (ath5k):
         -  Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
      - Realtek:
         - rtw88: 8821au and 8812au USB adapters support
         - rtw89: add thermal protection
         - rtw89: fine tune BT-coexsitence to improve user experience
         - rtw89: firmware secure boot for WiFi 6 chip

   - Bluetooth
      - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
        0x13d3:0x3623
      - add Realtek RTL8852BE support for id Foxconn 0xe123
      - add MediaTek MT7920 support for wireless module ids
      - btintel_pcie: add handshake between driver and firmware
      - btintel_pcie: add recovery mechanism
      - btnxpuart: add GPIO support to power save feature"

* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
  mm: page_frag: fix a compile error when kernel is not compiled
  Documentation: tipc: fix formatting issue in tipc.rst
  selftests: nic_performance: Add selftest for performance of NIC driver
  selftests: nic_link_layer: Add selftest case for speed and duplex states
  selftests: nic_link_layer: Add link layer selftest for NIC driver
  bnxt_en: Add FW trace coredump segments to the coredump
  bnxt_en: Add a new ethtool -W dump flag
  bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
  bnxt_en: Add functions to copy host context memory
  bnxt_en: Do not free FW log context memory
  bnxt_en: Manage the FW trace context memory
  bnxt_en: Allocate backing store memory for FW trace logs
  bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
  bnxt_en: Refactor bnxt_free_ctx_mem()
  bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
  bnxt_en: Update firmware interface spec to 1.10.3.85
  selftests/bpf: Add some tests with sockmap SK_PASS
  bpf: fix recursive lock when verdict program return SK_PASS
  wireguard: device: support big tcp GSO
  wireguard: selftests: load nf_conntrack if not present
  ...

Pull SoC driver updates from Arnd Bergmann:
 "Nothing particular important in the SoC driver updates, just the usual
  improvements to for drivers/soc and a couple of subsystems that don't
  fit anywhere else:

   - The largest set of updates is for Qualcomm SoC drivers, extending
     the set of supported features for additional SoCs in the QSEECOM,
     LLCC and socinfo drivers.a

   - The ti_sci firmware driver gains support for power managment

   - The drivers/reset subsystem sees a rework of the microchip sparx5
     and amlogic reset drivers to support additional chips, plus a few
     minor updates on other platforms

   - The SCMI firmware interface driver gains support for two protocol
     extensions, allowing more flexible use of the shared memory area
     and new DT binding properties for configurability.

   - Mediatek SoC drivers gain support for power managment on the MT8188
     SoC and a new driver for DVFS.

   - The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
     and a few bugfixes

   - The Hisilicon Kunpeng HCCS driver gains support for configuring
     lanes through sysfs

  Finally, there are cleanups and minor fixes for drivers/{soc, bus,
  memory}, including changing back the .remove_new callback to .remove,
  as well as a few other updates for freescale (powerpc) soc drivers,
  NXP i.MX soc drivers, cznic turris platform driver, memory controller
  drviers, TI OMAP SoC drivers, and Tegra firmware drivers"

* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
  soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
  soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
  soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
  platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
  platform: cznic: turris-omnia-mcu: Document the driver private data structure
  firmware: turris-mox-rwtm: Document the driver private data structure
  bus: Switch back to struct platform_driver::remove()
  soc: qcom: ice: Remove the device_link field in qcom_ice
  drm/msm/adreno: Setup SMMU aparture for per-process page table
  firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
  firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
  soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
  dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
  soc: qcom: llcc: Flip the manual slice configuration condition
  dt-bindings: firmware: qcom,scm: Document sm8750 SCM
  firmware: qcom: uefisecapp: Allow X1E Devkit devices
  misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
  misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
  soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
  dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
  ...

Pull SoC devicetree updates from Arnd Bergmann:
 "This release adds the devicetree files for an impressive number of new
  SoC variants, though as expected these are all related to others we
  already support:

   - The microchip sam9x7 devicetree is now added, after the device
     driver and platform code has already made it in. This is likely the
     last ARMv5 (!) platform to ever get added, updating the 20+ year
     old at91/sam9 platform with DDR3 memory and gigabit ethernet.

   - On the Apple platform, there are now devicetree files for a number
     of A-series SoCs in addition to the M-series ones, these are used
     primarily in phones and tablets, but are closely related to the
     already supported chips.

   - Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in
     older Samsung Galaxy phones.

   - Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely
     related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end
     laptops.

   - Rockchip RK3528 and RK3576 are new variants of their TV box and
     Tablet chips, still using the older ARMv8.0 cores from
     RK3328/RK3399 but with a newer process and other improvements from
     the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also
     added, these are just lower-cost versions of their normal
     counterparts.

   - TI J742S2 is a feature-reduced version of the J784s4
     industrial/automotive SoC, with fewer CPU cores.

   - Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
     (Cortex-A53) core, at this point support is only added for running
     on the RISC-V side on the LicheeRV Nano board.

  A total of 92 new .dts files describing individual machines is added,
  which must be a new record. The majority of these is for the newly
  added chips above, notably all the Apple phones and tablets. The other
  new machines include nine industrial/embedded boards with NXP i.MX6 or
  i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for
  Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm
  qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110.

  As usual there are also many newly added features in existing boards
  as well as cleanups and minor bugfixes"

* tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits)
  arm64: dts: apm: Remove unused and undocumented "bus_num" property
  arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
  arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property
  arm64: dts: lg131x: Update spi clock properties
  arm64: dts: seattle: Update spi clock properties
  arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
  arm64: dts: rockchip: add Radxa ROCK 5C
  dt-bindings: arm: rockchip: add Radxa ROCK 5C
  arm64: dts: rockchip: orangepi-5-plus: Enable GPU
  arm64: dts: rockchip: enable USB3 on NanoPC-T6
  arm64: dts: rockchip: adapt regulator nodenames to preferred form
  arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
  arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
  arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
  arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
  arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
  arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
  arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
  arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
  arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
  ...

Pull interrupt subsystem updates from Thomas Gleixner:
 "Tree wide:

   - Make nr_irqs static to the core code and provide accessor functions
     to remove existing and prevent future aliasing problems with local
     variables or function arguments of the same name.

  Core code:

   - Prevent freeing an interrupt in the devres code which is not
     managed by devres in the first place.

   - Use seq_put_decimal_ull_width() for decimal values output in
     /proc/interrupts which increases performance significantly as it
     avoids parsing the format strings over and over.

   - Optimize raising the timer and hrtimer soft interrupts by using the
     'set bit only' variants instead of the combined version which
     checks whether ksoftirqd should be woken up. The latter is a
     pointless exercise as both soft interrupts are raised in the
     context of the timer interrupt and therefore never wake up
     ksoftirqd.

   - Delegate timer/hrtimer soft interrupt processing to a dedicated
     thread on RT.

     Timer and hrtimer soft interrupts are always processed in ksoftirqd
     on RT enabled kernels. This can lead to high latencies when other
     soft interrupts are delegated to ksoftirqd as well.

     The separate thread allows to run them seperately under a RT
     scheduling policy to reduce the latency overhead.

  Drivers:

   - New drivers or extensions of existing drivers to support Renesas
     RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
     chips

   - Support for multi-cluster GICs on MIPS.

     MIPS CPUs can come with multiple CPU clusters, where each CPU
     cluster has its own GIC (Generic Interrupt Controller). This
     requires to access the GIC of a remote cluster through a redirect
     register block.

     This is encapsulated into a set of helper functions to keep the
     complexity out of the actual code paths which handle the GIC
     details.

   - Support for encrypted guests in the ARM GICV3 ITS driver

     The ITS page needs to be shared with the hypervisor and therefore
     must be decrypted.

   - Small cleanups and fixes all over the place"

* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
  irqchip/riscv-aplic: Prevent crash when MSI domain is missing
  genirq/proc: Use seq_put_decimal_ull_width() for decimal values
  softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
  timers: Use __raise_softirq_irqoff() to raise the softirq.
  hrtimer: Use __raise_softirq_irqoff() to raise the softirq
  riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
  irqchip: Add T-HEAD C900 ACLINT SSWI driver
  dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
  irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
  irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
  irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
  irqchip/mips-gic: Multi-cluster support
  irqchip/mips-gic: Setup defaults in each cluster
  irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
  irqchip/mips-gic: Replace open coded online CPU iterations
  genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
  genirq/devres: Don't free interrupt which is not managed by devres
  irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
  irqchip/aspeed-intc: Add AST27XX INTC support
  dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
  ...

FSL SOC changes for 6.13:

- Fix a missing of_node_put() in RCPM
- Fix a missing error code on failure in CPM1 QMC
- Switch to using for_each_available_child_of_node_scoped() in CPM1 TSA

* tag 'soc_fsl-6.13-1' of https://github.com/chleroy/linux:
  soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
  soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
  soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()

Link: https://lore.kernel.org/r/c3c4961b-fe2a-4fcc-a7a1-f8b5352e09a2@csgroup.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

A kernel test robot detected a missing error code:
   qmc.c:1942 qmc_probe() warn: missing error code 'ret'

Indeed, the error returned by platform_get_irq() is checked and the
operation is aborted in case of failure but the ret error code is
not set in that case.

Set the ret error code.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202411051350.KNy6ZIWA-lkp@intel.com/
Fixes: 3178d58e0b97 ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20241105145623.401528-1-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

of_find_compatible_node() requires a call to of_node_put() when the
pointer to the node is not required anymore to decrement its refcount
and avoid leaking memory.

Add the missing call to of_node_put() after the node has been used.

Cc: stable@vger.kernel.org
Fixes: e95f287deed2 ("soc: fsl: handle RCPM errata A-008646 on SoC LS1021A")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241013-rcpm-of_node_put-v1-1-9a8e55a01eae@gmail.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

The non-scoped variant of this macro turns error-prone as soon as error
paths are included, because explicit calls to of_node_put() are required
to avoid leaking memory.

Using its scoped counterpart simplifies the code by removing the need of
explicit calls to of_node_put(), as they are automatically triggered as
soon as the child node goes out of scope. Moreover, it is more robust as
it accounts for new error paths without having to worry about
decrementing the object's refcount.

Note that the device_node is declared within the macro, and its explicit
declaration can be dropped as well if it is not used anywhere else.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20241002-tsa-scoped-v1-1-ba6a6d657f82@gmail.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

A few more Qualcomm driver updates for v6.13

Make the Adreno driver invoke the SMMU aperture setup firmware function,
which is required to allow the GPU to manage per-process page tables in
some firmware versions - as an example Rb3Gen2 has no GPU without this.

Add X1E Devkit to the list of devices that has functional EFI variable
access through the uefisecapp.

Flip the "manual slice configuration quirk" in the Qualcomm LLCC driver,
as this only applies to a single platform, and introduce support for
QCS8300, QCS615, SAR2130P, and SAR1130P.

Lastly, add IPQ5424 and IPQ5404 to the Qualcomm socinfo driver.

* tag 'qcom-drivers-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  soc: qcom: ice: Remove the device_link field in qcom_ice
  drm/msm/adreno: Setup SMMU aparture for per-process page table
  firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
  soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
  dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
  soc: qcom: llcc: Flip the manual slice configuration condition
  dt-bindings: firmware: qcom,scm: Document sm8750 SCM
  firmware: qcom: uefisecapp: Allow X1E Devkit devices
  soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
  dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
  soc: qcom: llcc: Add configuration data for QCS615
  dt-bindings: cache: qcom,llcc: Document the QCS615 LLCC
  soc: qcom: llcc: add support for SAR2130P and SAR1130P
  soc: qcom: llcc: use deciman integers for bit shift values
  dt-bindings: cache: qcom,llcc: document SAR2130P and SAR1130P

Link: https://lore.kernel.org/r/20241113032425.356306-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Samsung SoC drivers for v6.13

Add Samsung ChipID driver support for new SoCs: Exynos8895, Exynos990
and Exynos9810.

* tag 'samsung-drivers-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  soc: samsung: exynos-chipid: Add support for Exynos9810 SoC
  dt-bindings: hwinfo: samsung,exynos-chipid: Add Samsung exynos9810 compatible
  soc: samsung: exynos-chipid: Add support for Exynos 990 chipid
  dt-bindings: hwinfo: exynos-chipid: Add compatible for Exynos 990 chipid
  soc: samsung: exynos-chipid: add exynos8895 SoC support
  dt-bindings: hwinfo: samsung,exynos-chipid: add exynos8895 compatible

Link: https://lore.kernel.org/r/20241029081002.21106-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>