linux-toradex.git/drivers/soc, branch v7.0-rc1 Linux kernel for Apalis and Colibri modules Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-22T04:03:00+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T04:03:00+00:00 32a92f8c89326985e05dce8b22d3f0aa07a3e1bd This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This converts some of the visually simpler cases that have been split
over multiple lines.  I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.

Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script.  I probably had made it a bit _too_ trivial.

So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.

The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-22T01:09:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T00:37:42+00:00 bf4afc53b77aeaa48b5409da5c8da6bb4eff7f43 This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
treewide: Replace kmalloc with kmalloc_obj for non-scalar types 2026-02-21T09:02:28+00:00 Kees Cook kees@kernel.org 2026-02-21T07:49:23+00:00 69050f8d6d075dc01af7a5f2f550a8067510366f This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> 
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>
Merge tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy 2026-02-17T19:40:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-17T19:40:04+00:00 9b725d5959a1d9bb670ccdb23add45f0eaafefb5 Pull phy updates from Vinod Koul: "Core: - Add suuport for "rx-polarity" and "tx-polarity" device tree properties and phy common properties to manage this New Support: - Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for that. - SpacemiT PCIe/combo PHY and K1 USB2 PHY driver. - HDMI 2.1 FRL configuration support and driver enabling for rockchip samsung-hdptx driver - TI TCAN1046 phy - Renesas RZ/V2H(P) and RZ/V2N usb3 - Mediatek MT8188 hdmi-phy - Google Tensor SoC USB PHY driver - Apple Type-C PHY Updates: - Subsystem conversion for clock round_rate() to determine_rate() - TI USB3 DT schema conversion - Samsung ExynosAutov920 usb3, combo hsphy and ssphy support" * tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits) phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate() dt-bindings: phy: ti,control-phy-otghs: convert to DT schema dt-bindings: phy: ti,phy-usb3: convert to DT schema phy: tegra: xusb: Remove unused powered_on variable phy: renesas: rcar-gen3-usb2: add regulator dependency phy: GOOGLE_USB: add TYPEC dependency phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable() phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC dt-bindings: phy: renesas,usb2-phy: Document mux-states property dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config phy: rockchip: samsung-hdptx: Drop hw_rate driver data phy: rockchip: samsung-hdptx: Compute clk rate from PLL config phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists ... 
Pull phy updates from Vinod Koul:
 "Core:

   - Add suuport for "rx-polarity" and "tx-polarity" device tree
     properties and phy common properties to manage this

  New Support:

   - Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI
     PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali
     PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for
     that.

   - SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.

   - HDMI 2.1 FRL configuration support and driver enabling for rockchip
     samsung-hdptx driver

   - TI TCAN1046 phy

   - Renesas RZ/V2H(P) and RZ/V2N usb3

   - Mediatek MT8188 hdmi-phy

   - Google Tensor SoC USB PHY driver

   - Apple Type-C PHY

  Updates:

   - Subsystem conversion for clock round_rate() to determine_rate()

   - TI USB3 DT schema conversion

   - Samsung ExynosAutov920 usb3, combo hsphy and ssphy support"

* tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits)
  phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
  dt-bindings: phy: ti,control-phy-otghs: convert to DT schema
  dt-bindings: phy: ti,phy-usb3: convert to DT schema
  phy: tegra: xusb: Remove unused powered_on variable
  phy: renesas: rcar-gen3-usb2: add regulator dependency
  phy: GOOGLE_USB: add TYPEC dependency
  phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY
  phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management
  phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
  phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
  phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
  dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
  dt-bindings: phy: renesas,usb2-phy: Document mux-states property
  dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
  phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support
  phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper
  phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config
  phy: rockchip: samsung-hdptx: Drop hw_rate driver data
  phy: rockchip: samsung-hdptx: Compute clk rate from PLL config
  phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists
  ...
Merge tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2026-02-11T04:45:30+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-11T04:45:30+00:00 bdbddf72a2ab1cfea699959795d70df3931eefe7 Pull SoC driver updates from Arnd Bergmann: "There are are a number of to firmware drivers, in particular the TEE subsystem: - a bus callback for TEE firmware that device drivers can register to - sysfs support for tee firmware information - minor updates to platform specific TEE drivers for AMD, NXP, Qualcomm and the generic optee driver - ARM SCMI firmware refactoring to improve the protocol discover among other fixes and cleanups - ARM FF-A firmware interoperability improvements The reset controller and memory controller subsystems gain support for additional hardware platforms from Mediatek, Renesas, NXP, Canaan and SpacemiT. Most of the other changes are for random drivers/soc code. Among a number of cleanups and newly added hardware support, including: - Mediatek MT8196 DVFS power management and mailbox support - Qualcomm SCM firmware and MDT loader refactoring, as part of the new Glymur platform support. - NXP i.MX9 System Manager firmware support for accessing the syslog - Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD SoCs" * tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits) bus: fsl-mc: fix an error handling in fsl_mc_device_add() reset: spacemit: Add SpacemiT K3 reset driver reset: spacemit: Extract common K1 reset code reset: Create subdirectory for SpacemiT drivers dt-bindings: soc: spacemit: Add K3 reset support and IDs reset: canaan: k230: drop OF dependency and enable by default reset: rzg2l-usbphy-ctrl: Add suspend/resume support reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits() reset: gpio: check the return value of gpiod_set_value_cansleep() reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV reset: imx8mp-audiomix: Extend the driver usage reset: imx8mp-audiomix: Switch to using regmap API reset: imx8mp-audiomix: Drop unneeded macros soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create() mailbox: mtk-cmdq: Add driver data to support for MT8196 mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction ... 
Pull SoC driver updates from Arnd Bergmann:
 "There are are a number of to firmware drivers, in particular the TEE
  subsystem:

   - a bus callback for TEE firmware that device drivers can register to

   - sysfs support for tee firmware information

   - minor updates to platform specific TEE drivers for AMD, NXP,
     Qualcomm and the generic optee driver

   - ARM SCMI firmware refactoring to improve the protocol discover
     among other fixes and cleanups

   - ARM FF-A firmware interoperability improvements

  The reset controller and memory controller subsystems gain support for
  additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
  SpacemiT.

  Most of the other changes are for random drivers/soc code. Among a
  number of cleanups and newly added hardware support, including:

   - Mediatek MT8196 DVFS power management and mailbox support

   - Qualcomm SCM firmware and MDT loader refactoring, as part of the
     new Glymur platform support.

   - NXP i.MX9 System Manager firmware support for accessing the syslog

   - Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
     SoCs"

* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
  bus: fsl-mc: fix an error handling in fsl_mc_device_add()
  reset: spacemit: Add SpacemiT K3 reset driver
  reset: spacemit: Extract common K1 reset code
  reset: Create subdirectory for SpacemiT drivers
  dt-bindings: soc: spacemit: Add K3 reset support and IDs
  reset: canaan: k230: drop OF dependency and enable by default
  reset: rzg2l-usbphy-ctrl: Add suspend/resume support
  reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
  reset: gpio: check the return value of gpiod_set_value_cansleep()
  reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
  reset: imx8mp-audiomix: Extend the driver usage
  reset: imx8mp-audiomix: Switch to using regmap API
  reset: imx8mp-audiomix: Drop unneeded macros
  soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
  soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
  soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
  soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
  soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
  mailbox: mtk-cmdq: Add driver data to support for MT8196
  mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
  ...
Merge tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2026-02-10T22:01:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-10T22:01:40+00:00 dc855b77719fe452d670cae2cf64da1eb51f16cc Pull irq chip driver updates from Thomas Gleixner: - Add support for the Renesas RZ/V2N SoC - Add a new driver for the Renesas RZ/[TN]2H SoCs - Preserve the register state of the RISCV APLIC interrupt controller accross suspend/resume - Reinitialize the RISCV IMSIC registers after suspend/resume - Make the various Loongson interrupt chip drivers 32/64-bit aware - Handle the number of hardware interrupts in the SIFIVE PLIC driver correctly The hardware interrupt 0 is reserved which resulted in inconsistent accounting. That went unnoticed as the off by one is only noticable when the number of device interrupts is a multiple of 32 - The usual device tree updates, cleanups and improvements all over the place * tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) irqchip/gic-v5: Fix spelling mistake "ouside" -> "outside" dt-bindings: interrupt-controller: sifive,plic: Clarify the riscv,ndev meaning in PLIC irqchip/sifive-plic: Handle number of hardware interrupts correctly irqchip/aspeed-scu-ic: Remove unused variable mask irqchip/ti-sci-intr: Allow parsing interrupt-types per-line dt-bindings: interrupt-controller: ti,sci-intr: Per-line interrupt-types irqchip/renesas-rzv2h: Add suspend/resume support irqchip/aslint-sswi: Fix error check of of_io_request_and_map() result irqchip: Allow LoongArch irqchip drivers on both 32BIT/64BIT irqchip/loongson-pch-pic: Adjust irqchip driver for 32BIT/64BIT irqchip/loongson-pch-msi: Adjust irqchip driver for 32BIT/64BIT irqchip/loongson-htvec: Adjust irqchip driver for 32BIT/64BIT irqchip/loongson-eiointc: Adjust irqchip driver for 32BIT/64BIT irqchip/loongson-liointc: Adjust irqchip driver for 32BIT/64BIT irqchip/loongarch-avec: Adjust irqchip driver for 32BIT/64BIT irqchip/riscv-aplic: Preserve APLIC states across suspend/resume irqchip/riscv-imsic: Add a CPU pm notifier to restore the IMSIC on exit arm64: dts: renesas: r9a09g087: Add ICU support arm64: dts: renesas: r9a09g077: Add ICU support irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver ... 
Pull irq chip driver updates from Thomas Gleixner:

 - Add support for the Renesas RZ/V2N SoC

 - Add a new driver for the Renesas RZ/[TN]2H SoCs

 - Preserve the register state of the RISCV APLIC interrupt controller
   accross suspend/resume

 - Reinitialize the RISCV IMSIC registers after suspend/resume

 - Make the various Loongson interrupt chip drivers 32/64-bit aware

 - Handle the number of hardware interrupts in the SIFIVE PLIC driver
   correctly

   The hardware interrupt 0 is reserved which resulted in inconsistent
   accounting. That went unnoticed as the off by one is only noticable
   when the number of device interrupts is a multiple of 32

 - The usual device tree updates, cleanups and improvements all over the
   place

* tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  irqchip/gic-v5: Fix spelling mistake "ouside" -> "outside"
  dt-bindings: interrupt-controller: sifive,plic: Clarify the riscv,ndev meaning in PLIC
  irqchip/sifive-plic: Handle number of hardware interrupts correctly
  irqchip/aspeed-scu-ic: Remove unused variable mask
  irqchip/ti-sci-intr: Allow parsing interrupt-types per-line
  dt-bindings: interrupt-controller: ti,sci-intr: Per-line interrupt-types
  irqchip/renesas-rzv2h: Add suspend/resume support
  irqchip/aslint-sswi: Fix error check of of_io_request_and_map() result
  irqchip: Allow LoongArch irqchip drivers on both 32BIT/64BIT
  irqchip/loongson-pch-pic: Adjust irqchip driver for 32BIT/64BIT
  irqchip/loongson-pch-msi: Adjust irqchip driver for 32BIT/64BIT
  irqchip/loongson-htvec: Adjust irqchip driver for 32BIT/64BIT
  irqchip/loongson-eiointc: Adjust irqchip driver for 32BIT/64BIT
  irqchip/loongson-liointc: Adjust irqchip driver for 32BIT/64BIT
  irqchip/loongarch-avec: Adjust irqchip driver for 32BIT/64BIT
  irqchip/riscv-aplic: Preserve APLIC states across suspend/resume
  irqchip/riscv-imsic: Add a CPU pm notifier to restore the IMSIC on exit
  arm64: dts: renesas: r9a09g087: Add ICU support
  arm64: dts: renesas: r9a09g077: Add ICU support
  irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver
  ...
Merge tag 'soc_fsl-6.20-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers 2026-02-04T07:41:49+00:00 Arnd Bergmann arnd@arndb.de 2026-02-04T07:41:48+00:00 cfd00b7e26c8331e3bb0f03ca770888866c15ff4 FSL SOC Changes for 6.20 Freescale Management Complex: - Convert fsl-mc bus to bus callbacks - Fix a use-after-free - Drop redundant error messages - Fix ressources release on some error path Freescale QUICC Engine: - Add an interrupt controller for IO Ports - Use scoped for-each OF child loop * tag 'soc_fsl-6.20-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux: bus: fsl-mc: fix an error handling in fsl_mc_device_add() soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove dt-bindings: soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports soc: fsl: qe: Simplify with scoped for each OF child loop bus: fsl-mc: fix use-after-free in driver_override_show() bus: fsl-mc: Convert to bus callbacks bus: fsl-mc: Drop error message in probe function Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
FSL SOC Changes for 6.20

Freescale Management Complex:
- Convert fsl-mc bus to bus callbacks
- Fix a use-after-free
- Drop redundant error messages
- Fix ressources release on some error path

Freescale QUICC Engine:
- Add an interrupt controller for IO Ports
- Use scoped for-each OF child loop

* tag 'soc_fsl-6.20-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux:
  bus: fsl-mc: fix an error handling in fsl_mc_device_add()
  soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
  dt-bindings: soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports
  soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports
  soc: fsl: qe: Simplify with scoped for each OF child loop
  bus: fsl-mc: fix use-after-free in driver_override_show()
  bus: fsl-mc: Convert to bus callbacks
  bus: fsl-mc: Drop error message in probe function

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'v6.20-rockchip-drivers1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers 2026-01-29T10:25:29+00:00 Arnd Bergmann arnd@arndb.de 2026-01-29T10:25:29+00:00 1b65492f45c2ecb4590ccdf0fce35967531db2bf Two fixes for the default-settings code for the General-Register-Files, which sets system defaults for some settings like disabling the automatic jtag/sdmmc switching. One is a corrected register-offset and the other makes the code actually look for all matched GRF instances, which it didn't do before. * tag 'v6.20-rockchip-drivers1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: grf: Support multiple grf to be handled soc: rockchip: grf: Fix wrong RK3576_IOCGRF_MISC_CON definition Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Two fixes for the default-settings code for the General-Register-Files,
which sets system defaults for some settings like disabling the automatic
jtag/sdmmc switching.

One is a corrected register-offset and the other makes the code actually
look for all matched GRF instances, which it didn't do before.

* tag 'v6.20-rockchip-drivers1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  soc: rockchip: grf: Support multiple grf to be handled
  soc: rockchip: grf: Fix wrong RK3576_IOCGRF_MISC_CON definition

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'mvebu-arm-6.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/drivers 2026-01-29T10:23:07+00:00 Arnd Bergmann arnd@arndb.de 2026-01-29T10:23:06+00:00 1918a0d5746ec003e8f59c2ed77fb4d1611b9390 mvebu arm for 6.20 (part 1) Simplify Dove PMU OF child node iteration with scoped loops * tag 'mvebu-arm-6.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: soc: dove: pmu: Simplify with scoped for each OF child loop Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
mvebu arm for 6.20 (part 1)

Simplify Dove PMU OF child node iteration with scoped loops

* tag 'mvebu-arm-6.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  soc: dove: pmu: Simplify with scoped for each OF child loop

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'amlogic-drivers-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers 2026-01-29T09:13:23+00:00 Arnd Bergmann arnd@arndb.de 2026-01-29T09:13:23+00:00 8536b26e607866430a23c56e304cbf4abf57d50d Amlogic Drivers for v6.20: - add new SoC id for S905Y4 * tag 'amlogic-drivers-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: soc: amlogic: meson-gx-socinfo: add new SoC id for S905Y4 Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Amlogic Drivers for v6.20:
- add new SoC id for S905Y4

* tag 'amlogic-drivers-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  soc: amlogic: meson-gx-socinfo: add new SoC id for S905Y4

Signed-off-by: Arnd Bergmann <arnd@arndb.de>