Pull minor spi MXS fixes from Mark Brown:
 "These fixes are both pretty minor ones and are driver local."

* tag 'spi-mxs' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
  spi: mxs: Terminate DMA in case of DMA timeout
  spi: mxs: Assign message status after transfer finished

Pull spi fixes from Mark Brown:
 "A bunch of fixes here, mostly minor except for the pl022 which has
  just been a bit of a shambles all round, the recent runtime PM changes
  have as far as I can tell never worked so they're just getting thrown
  out."

* tag 'spi-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
  spi/pl022: Revert recent runtime PM changes
  spi: tsc2005: delete soon-obsolete e-mail address
  spi: spi-rspi: fix build error for the latest shdma driver

[Originally sent by Ulf as two changes, squashed down into one with a
redone changelog, thanks to Russell King for analysis. -- broonie]

This reverts commit 688723 (spi/pl022: enable runtime PM) and commit
2fb30d (spi/pl022: fix spi-pl022 pm enable at probe).

Commit "spi/pl022: enable runtime PM" introduced runtime PM issues as it
interacted badly with the work Russell King had done to move core
runtime PM handling into the bus.  Due to that commit, "spi/pl022: fix
spi-pl022 pm enable at probe" was merged to fix part of those issues.

Instead of adding another fix, let's clean up and revert everything
back to when it was already fine.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Revert "spi/pl022: enable runtime PM"

Conflicts:
	drivers/spi/spi-pl022.c

A collection of warning fixes on non-ARM code from Arnd Bergmann:

* 'testing/driver-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: s3c: mark s3c2440_clk_add as __init_refok
  spi/s3c64xx: use correct dma_transfer_direction type
  pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops
  USB: EHCI: mark ehci_orion_conf_mbus_windows __devinit
  mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN
  SCSI: ARM: make fas216_dumpinfo function conditional
  SCSI: ARM: ncr5380/oak uses no interrupts

There is a subtle difference between dma_transfer_direction and
dma_data_direction: the former is used by the dmaengine framework,
while the latter is used by the dma-mapping API. Although the
purpose is comparable, the actual values are different and must
not be mixed. In this case, the driver just wants to use
dma_transfer_direction.

Without this patch, building s3c6400_defconfig results in:

drivers/spi/spi-s3c64xx.c: In function 's3c64xx_spi_dmacb':
drivers/spi/spi-s3c64xx.c:239:21: warning: comparison between
	'enum dma_data_direction' and 'enum dma_transfer_direction' [-Wenum-compare]

As pointed out by Kukjin Kim, this also changes the use of constants
from DMA_FROM_DEVICE/DMA_TO_DEVICE to DMA_DEV_TO_MEM/DMA_MEM_TO_DEV.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: spi-devel-general@lists.sourceforge.net

Because the latest shdma driver changed, it caused build error in
the spi-rspi driver. This patch fixed the build error.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

In case the SPI DMA times out, the DMA might still be in some kind of
inconsistent state. Issue dmaengine_terminate_all() on the particular
channel to kill off all operations before continuing.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

In the current code implementing the MXS SPI driver, every transferred
message had assigned status = 0, which is not correct. Properly assign
status returned from the I/O functions.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Pull slave-dmaengine updates from Vinod Koul:
 "This time we have Andy updates on dw_dmac which is attempting to make
  this IP block available as PCI and platform device though not fully
  complete this time.

  We also have TI EDMA moving the dma driver to use dmaengine APIs, also
  have a new driver for mmp-tdma, along with bunch of small updates.

  Now for your excitement the merge is little unusual here, while
  merging the auto merge on linux-next picks wrong choice for pl330
  (drivers/dma/pl330.c) and this causes build failure.  The correct
  resolution is in linux-next.  (DMA: PL330: Fix build error) I didn't
  back merge your tree this time as you are better than me so no point
  in doing that for me :)"

Fixed the pl330 conflict as in linux-next, along with trivial header
file conflicts due to changed includes.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits)
  dma: tegra: fix interrupt name issue with apb dma.
  dw_dmac: fix a regression in dwc_prep_dma_memcpy
  dw_dmac: introduce software emulation of LLP transfers
  dw_dmac: autoconfigure data_width or get it via platform data
  dw_dmac: autoconfigure block_size or use platform data
  dw_dmac: get number of channels from hardware if possible
  dw_dmac: fill optional encoded parameters in register structure
  dw_dmac: mark dwc_dump_chan_regs as inline
  DMA: PL330: return ENOMEM instead of 0 from pl330_alloc_chan_resources
  DMA: PL330: Remove redundant runtime_suspend/resume functions
  DMA: PL330: Remove controller clock enable/disable
  dmaengine: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
  DMA: PL330: Set the capability of pdm0 and pdm1 as DMA_PRIVATE
  ARM: EXYNOS: Set the capability of pdm0 and pdm1 as DMA_PRIVATE
  dma: tegra: use list_move_tail instead of list_del/list_add_tail
  mxs/dma: Enlarge the CCW descriptor area to 4 pages
  dw_dmac: utilize slave_id to pass request line
  dmaengine: mmp_tdma: add dt support
  dmaengine: mmp-pdma support
  spi: davici - make davinci select edma
  ...

Pull MIPS update from Ralf Baechle:
 "This is the MIPS update for 3.7.

  A fair chunk of them are platform updates to the Cavium Octeon SOC
  (which involves machine generated header files of considerable size),
  Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx
  platforms.

  Support for the commercial MIPS simulator MIPSsim has been removed as
  MIPS Technologies is shifting away from this product and Qemu is
  offering various more powerful platforms.  The generic MIPS code can
  now also probe for no-execute / write-only TLB features implemented
  without the full SmartMIPS extension as permitted by the latest MIPS
  processor architecture.  Lots of small changes to generic code."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits)
  MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs
  MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
  MIPS: BCM63XX: Properly handle mac address octet overflow
  MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user.
  MIPS: Replace `-' in defconfig filename wth `_' for consistency.
  MIPS: Wire kcmp syscall.
  MIPS: MIPSsim: Remove the MIPSsim platform.
  MIPS: NOTIFY_RESUME is not needed in TIF masks
  MIPS: Merge the identical "return from syscall" per-ABI code
  MIPS: Unobfuscate _TIF..._MASK
  MIPS: Prevent hitting do_notify_resume() with !user_mode(regs).
  MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'.
  MIPS: Add base architecture support for RI and XI.
  MIPS: Optimise TLB handlers for MIPS32/64 R2 cores.
  MIPS: uasm: Add INS and EXT instructions.
  MIPS: Avoid pipeline stalls on some MIPS32R2 cores.
  MIPS: Make VPE count to be one-based.
  MIPS: Add new end of interrupt functionality for GIC.
  MIPS: Add EIC support for GIC.
  MIPS: Code clean-ups for the GIC.
  ...