PCI and platform buses have different defaults for runtime PM.
In particular PCI probe is assumed to be called when PM runtime
is enabled by the PCI core. In this case if we try enable it again
the PM runtime complaints with

    pxa2xx_spi_pci 0000:00:07.0: Unbalanced pm_runtime_enable!

Fix this by moving PM runtime handling from the SPI PXA2xx core
to the glue drivers.

Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly")
Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file")
Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240822113408.750831-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

The platform_data field may be supplied by legacy board code.
In other cases we override it, and module remove and probe cycle
will crash the kernel since it will carry a stale pointer.

Fix this by supplying a third argument to the pxa2xx_spi_probe()
and avoid overriding dev->platform_data.

Reported-by: Hao Ma <hao.ma@intel.com>
Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly")
Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file")
Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240822113408.750831-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Referring to the errata ERR051608 of I.MX93, LPSPI TCR[PRESCALE]
can only be configured to be 0 or 1, other values are not valid
and will cause LPSPI to not work.

Add the prescale limitation for LPSPI in I.MX93. Other platforms
are not affected.

Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20240820070658.672127-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Its necessary to call pm_runtime_force_*() hooks as part of system
suspend/resume calls so that the runtime_pm hooks get called. This
ensures latest state of the IP is cached and restored during system
sleep. This is especially true if runtime autosuspend is enabled as
runtime suspend hooks may not be called at all before system sleeps.

Without this patch, OSPI NOR enumeration (READ_ID) fails during resume
as context saved during suspend path is inconsistent.

Fixes: 078d62de433b ("spi: cadence-qspi: add system-wide suspend and resume callbacks")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://patch.msgid.link/20240814151237.3856184-1-vigneshr@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Large blocks of data time out when reading because we don't wait long
enough for the transfer to complete. Scale our timeouts based on the
amount of data we are tranferring, with a healthy dose of pessimism.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20240809201540.3363243-1-sean.anderson@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>

The effective SPI clock frequency should never exceed speed_hz
otherwise this might result in undefined behavior of the SPI device.

Currently the scldiv calculation could violate this constraint.
For the example parameters perclk_rate = 24 MHz and speed_hz = 7 MHz,
the function fsl_lpspi_set_bitrate will determine perscale = 0 and
scldiv = 1, which is a effective SPI clock of 8 MHz.

So fix this by rounding up the quotient of perclk_rate and speed_hz.
While this never change within the loop, we can pull this out.

Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240804113611.83613-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>

When the of_device_id entry for "rohm,bh2228fv" was added, the
corresponding spi_device_id was forgotten, causing a warning message
during boot-up:

    SPI driver spidev has no spi_device_id for rohm,bh2228fv

Fix module autoloading and shut up the warning by adding the missing
entry.

Fixes: fc28d1c1fe3b3e2f ("spi: spidev: add correct compatible for Rohm BH2228FV")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/cb571d4128f41175f31319cd9febc829417ea167.1722346539.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>

If the value of max_speed_hz is 0, it may cause a division by zero
error in hisi_calc_effective_speed().
The value of max_speed_hz is provided by firmware.
Firmware is generally considered as a trusted domain. However, as
division by zero errors can cause system failure, for defense measure,
the value of max_speed is validated here. So 0 is regarded as invalid
and an error code is returned.

Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Jay Fang <f.fangjian@huawei.com>
Link: https://patch.msgid.link/20240730032040.3156393-3-liudingyuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

The speed specified by the user is used to calculate the clk_div based
on the max_speed_hz in hisi_calc_effective_speed.  A very low speed
value can lead to a clk_div larger than the variable range. Avoid this
by setting the min_speed_hz so that such a small speed value is
rejected.  __spi_validate() in spi.c will return -EINVAL for the
specified speed_hz lower than min_speed_hz.

Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Jay Fang <f.fangjian@huawei.com>
Link: https://patch.msgid.link/20240730032040.3156393-2-liudingyuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Pull spi fixes from Mark Brown:
 "The bulk of this is a series of fixes for the microchip-core driver
  mostly originating from one of their customers, I also applied an
  additional patch adding support for controlling the word size which
  came along with it since it's still the merge window and clearly had a
  bunch of fairly thorough testing.

  We also have a fix for the compatible used to bind spidev to the
  BH2228FV"

* tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spidev: add correct compatible for Rohm BH2228FV
  dt-bindings: trivial-devices: fix Rohm BH2228FV compatible string
  spi: microchip-core: add support for word sizes of 1 to 32 bits
  spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer
  spi: microchip-core: fix init function not setting the master and motorola modes
  spi: microchip-core: only disable SPI controller when register value change requires it
  spi: microchip-core: defer asserting chip select until just before write to TX FIFO
  spi: microchip-core: fix the issues in the isr