linux-toradex.git/drivers/spi, branch v6.12-rc1

[tree-wide] finally take no_llseek out

2024-09-27T15:18:43+00:00

no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")

To quote that commit,

  At -rc1 we'll need do a mechanical removal of no_llseek -

  git grep -l -w no_llseek | grep -v porting.rst | while read i; do
	sed -i '/\/d' $i
  done

  would do it.

Unfortunately, that hadn't been done.  Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
	.llseek = no_llseek,
so it's obviously safe.

Signed-off-by: Al Viro 
Signed-off-by: Linus Torvalds

Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2024-09-26T19:00:25+00:00

Pull SoC update from Arnd Bergmann:
 "Convert ep93xx to devicetree

  This concludes a long journey towards replacing the old board files
  with devictree description on the Cirrus Logic EP93xx platform.

  Nikita Shubin has been working on this for a long time, for details
  see the last post on

    https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"

* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
  dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
  MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
  soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
  net: cirrus: use u8 for addr to calm down sparse
  dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
  dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
  pinctrl: ep93xx: Fix raster pins typo
  spi: ep93xx: update kerneldoc comments for ep93xx_spi
  clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
  clk: ep93xx: add module license
  dmaengine: cirrus: remove platform code
  ASoC: cirrus: edb93xx: Delete driver
  ARM: ep93xx: soc: drop defines
  ARM: ep93xx: delete all boardfiles
  ata: pata_ep93xx: remove legacy pinctrl use
  pwm: ep93xx: drop legacy pinctrl
  ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
  ARM: dts: ep93xx: Add EDB9302 DT
  ARM: dts: ep93xx: add ts7250 board
  ARM: dts: add Cirrus EP93XX SoC .dtsi
  ...

Merge tag 'spi-fix-v6.12-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2024-09-25T21:49:34+00:00

Pull spi fixes from Mark Brown:
 "Some driver specific fixes that came in during the merge window.

  Lorenzo Bianconi did some extra testing on the recently added arioha
  driver and found some issues, Alexander Dahl fixed some issues with
  signal delays in the Atmel QSPI driver and Jinjie Ruan has been fixing
  some nits with runtime PM cleanup"

* tag 'spi-fix-v6.12-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: atmel-quadspi: Avoid overwriting delay register settings
  spi: airoha: remove read cache in airoha_snand_dirmap_read()
  spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time
  spi: atmel-quadspi: Undo runtime PM changes at driver exit time
  spi: airoha: fix airoha_snand_{write,read}_data data_len estimation
  spi: airoha: fix dirmap_{read,write} operations

spi: atmel-quadspi: Avoid overwriting delay register settings

2024-09-20T09:41:19+00:00

Previously the MR and SCR registers were just set with the supposedly
required values, from cached register values (cached reg content
initialized to zero).

All parts fixed here did not consider the current register (cache)
content, which would make future support of cs_setup, cs_hold, and
cs_inactive impossible.

Setting SCBR in atmel_qspi_setup() erases a possible DLYBS setting from
atmel_qspi_set_cs_timing().  The DLYBS setting is applied by ORing over
the current setting, without resetting the bits first.  All writes to MR
did not consider possible settings of DLYCS and DLYBCT.

Signed-off-by: Alexander Dahl 
Fixes: f732646d0ccd ("spi: atmel-quadspi: Add support for configuring CS timing")
Link: https://patch.msgid.link/20240918082744.379610-2-ada@thorsis.com
Signed-off-by: Mark Brown

spi: airoha: remove read cache in airoha_snand_dirmap_read()

2024-09-20T08:08:05+00:00

Current upstream driver reports errors running mtd_oobtest kernel module
test:

root@OpenWrt:/# insmod mtd_test.ko
root@OpenWrt:/# insmod mtd_oobtest.ko dev=5
[ 7023.730584] =================================================
[ 7023.736399] mtd_oobtest: MTD device: 5
[ 7023.740160] mtd_oobtest: MTD device size 3670016, eraseblock size 131072, page size 2048, count of eraseblocks 28, pages per eraseblock 64, OOB size 128
[ 7023.753837] mtd_test: scanning for bad eraseblocks
[ 7023.758636] mtd_test: scanned 28 eraseblocks, 0 are bad
[ 7023.763861] mtd_oobtest: test 1 of 5
[ 7024.042076] mtd_oobtest: writing OOBs of whole device
[ 7024.682069] mtd_oobtest: written up to eraseblock 0
[ 7041.962077] mtd_oobtest: written 28 eraseblocks
[ 7041.966626] mtd_oobtest: verifying all eraseblocks
[ 7041.972276] mtd_oobtest: error @addr[0x0:0x0] 0xff -> 0xe diff 0xf1
[ 7041.978550] mtd_oobtest: error @addr[0x0:0x1] 0xff -> 0x10 diff 0xef
[ 7041.984932] mtd_oobtest: error @addr[0x0:0x2] 0xff -> 0x82 diff 0x7d
[ 7041.991293] mtd_oobtest: error @addr[0x0:0x3] 0xff -> 0x10 diff 0xef
[ 7041.997659] mtd_oobtest: error @addr[0x0:0x4] 0xff -> 0x0 diff 0xff
[ 7042.003942] mtd_oobtest: error @addr[0x0:0x5] 0xff -> 0x8a diff 0x75
[ 7042.010294] mtd_oobtest: error @addr[0x0:0x6] 0xff -> 0x20 diff 0xdf
[ 7042.016659] mtd_oobtest: error @addr[0x0:0x7] 0xff -> 0x1 diff 0xfe
[ 7042.022935] mtd_oobtest: error @addr[0x0:0x8] 0xff -> 0x2e diff 0xd1
[ 7042.029295] mtd_oobtest: error @addr[0x0:0x9] 0xff -> 0x40 diff 0xbf
[ 7042.035661] mtd_oobtest: error @addr[0x0:0xa] 0xff -> 0x0 diff 0xff
[ 7042.041935] mtd_oobtest: error @addr[0x0:0xb] 0xff -> 0x89 diff 0x76
[ 7042.048300] mtd_oobtest: error @addr[0x0:0xc] 0xff -> 0x82 diff 0x7d
[ 7042.054662] mtd_oobtest: error @addr[0x0:0xd] 0xff -> 0x15 diff 0xea
[ 7042.061014] mtd_oobtest: error @addr[0x0:0xe] 0xff -> 0x90 diff 0x6f
[ 7042.067380] mtd_oobtest: error @addr[0x0:0xf] 0xff -> 0x0 diff 0xff
....
[ 7432.421369] mtd_oobtest: error @addr[0x237800:0x36] 0xff -> 0x5f diff 0xa0
[ 7432.428242] mtd_oobtest: error @addr[0x237800:0x37] 0xff -> 0x21 diff 0xde
[ 7432.435118] mtd_oobtest: error: verify failed at 0x237800
[ 7432.440510] mtd_oobtest: error: too many errors
[ 7432.445053] mtd_oobtest: error -1 occurred

The above errors are due to the buggy logic in the 'read cache' available
in airoha_snand_dirmap_read() routine since there are some corner cases
where we are missing data updates. Since we do not get any read/write speed
improvement using the cache (according to the mtd_speedtest kernel
module test), in order to fix the mtd_oobtest test, remove the 'read cache'
in airoha_snand_dirmap_read routine. Now the driver is passing all the
tests available in mtd_test suite.

Fixes: a403997c1201 ("spi: airoha: add SPI-NAND Flash controller driver")
Tested-by: Christian Marangi 
Signed-off-by: Lorenzo Bianconi 
Link: https://patch.msgid.link/20240919-airoha-spi-fixes-v2-1-cb0f0ed9920a@kernel.org
Signed-off-by: Mark Brown

spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time

2024-09-19T10:51:20+00:00

It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).

Hence, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.

Fixes: 944c01a889d9 ("spi: lpspi: enable runtime pm for lpspi")
Signed-off-by: Jinjie Ruan 
Link: https://patch.msgid.link/20240906021251.610462-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown

spi: atmel-quadspi: Undo runtime PM changes at driver exit time

2024-09-19T10:51:19+00:00

It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).

Hence, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.

Fixes: 4a2f83b7f780 ("spi: atmel-quadspi: add runtime pm support")
Signed-off-by: Jinjie Ruan 
Link: https://patch.msgid.link/20240906023956.1004440-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown

spi: airoha: fix airoha_snand_{write,read}_data data_len estimation

2024-09-18T13:10:33+00:00

Fix data length written and read in airoha_snand_write_data and
airoha_snand_read_data routines respectively if it is bigger than
SPI_MAX_TRANSFER_SIZE.

Fixes: a403997c1201 ("spi: airoha: add SPI-NAND Flash controller driver")
Tested-by: Christian Marangi 
Signed-off-by: Lorenzo Bianconi 
Link: https://patch.msgid.link/20240913-airoha-spi-fixes-v1-2-de2e74ed4664@kernel.org
Signed-off-by: Mark Brown

spi: airoha: fix dirmap_{read,write} operations

2024-09-18T13:10:32+00:00

SPI_NFI_READ_FROM_CACHE_DONE bit must be written at the end of
dirmap_read operation even if it is already set.
In the same way, SPI_NFI_LOAD_TO_CACHE_DONE bit must be written at the
end of dirmap_write operation even if it is already set.
For this reason use regmap_write_bits() instead of regmap_set_bits().
This patch fixes mtd_pagetest kernel module test.

Fixes: a403997c1201 ("spi: airoha: add SPI-NAND Flash controller driver")
Tested-by: Christian Marangi 
Signed-off-by: Lorenzo Bianconi 
Link: https://patch.msgid.link/20240913-airoha-spi-fixes-v1-1-de2e74ed4664@kernel.org
Signed-off-by: Mark Brown

Merge tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2024-09-17T08:31:31+00:00

Pull spi updates from Mark Brown:
 "This is quite a quiet release for SPI. The one new core feature here
  is support for configuring the state of the MOSI pin when the bus is
  idle, there are some devices which are very fragile in this regard
  even when the chip select signal is not asserted. Otherwise we have
  some new driver support, a bunch of small fixes and some general
  cleanup work.

   - Support for configuring the state of the MOSI pin when the the bus
     is idle

   - Add the Elgin JG0309-01 in spidev

   - Support for Marvell xSPI, Mediatek MTK7981, Microchip PIC64GX, NXP
     i.MX8ULP, and Rockchip RK3576 controllers

  I also accidentally pulled in an IIO DT bindings update due to a typo
  when applying the MOSI idle state patches"

* tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (65 commits)
  spi: geni-qcom: Use devm functions to simplify code
  spi: remove spi_controller_is_slave() and spi_slave_abort()
  platform/olpc: olpc-xo175-ec: switch to use spi_target_abort().
  spi: slave-mt27xx: switch to use target_abort
  spi: spidev: switch to use spi_target_abort()
  spi: slave-system-control: switch to use spi_target_abort()
  spi: slave-time: switch to use spi_target_abort()
  spi: switch to use spi_controller_is_target()
  spi: fspi: add support for imx8ulp
  spi: fspi: involve lut_num for struct nxp_fspi_devtype_data
  dt-bindings: spi: nxp-fspi: add imx8ulp support
  spi: spidev_fdx: Fix the wrong format specifier
  spi: mxs: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
  spi: dt-bindings: Add rockchip,rk3576-spi compatible
  spi: Revert "spi: Insert the missing pci_dev_put()before return"
  spi: zynq-qspi: Replace kzalloc with kmalloc for buffer allocation
  spi: ppc4xx: Sort headers
  spi: ppc4xx: Revert "handle irq_of_parse_and_map() errors"
  spi: zynqmp-gqspi: Simplify with dev_err_probe()
  spi: zynqmp-gqspi: Use devm_spi_alloc_host()
  ...