linux-toradex.git/drivers/ssb, branch v2.6.31.3

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

2009-07-10T03:33:18+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits)
  cxgb3: Fix crash caused by stashing wrong netdev_queue
  ixgbe: Fix coexistence of FCoE and Flow Director in 82599
  memory barrier: adding smp_mb__after_lock
  net: adding memory barrier to the poll and receive callbacks
  netpoll: Fix carrier detection for drivers that are using phylib
  includecheck fix: include/linux, rfkill.h
  p54: tx refused but queue active
  Atheros Kconfig needs to be dependent on WLAN_80211
  mac80211: fix docbook
  mac80211_hwsim: avoid NULL access
  ssb: Add support for 4318E
  b43: Add support for 4318E
  zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b device
  zd1211rw: 07b8:6001 is a ZD1211B
  r6040: bump driver version to 0.24 and date to 08 July 2009
  r6040: restore MIER register correctly when IRQ line is shared
  ipv4: Fix fib_trie rebalancing, part 4 (root thresholds)
  davinci_emac: fix kernel oops when changing MAC address while interface is down
  igb: set lan id prior to configuring phy
  mac80211: minstrel: avoid accessing negative indices in rix_to_ndx()
  ...

ssb: Add support for 4318E

2009-07-08T19:24:25+00:00

Added support for the Broadcom 4318E chipset on PCMCIA/CF cards. The
4318E can do 802.11A/B/G, only B and G mode are supported in b43.

Signed-off-by: Clyde McPherson 
Signed-off-by: Larry Finger 
Signed-off-by: John W. Linville

Remove multiple KERN_ prefixes from printk formats

2009-07-08T17:30:03+00:00

Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up
handling of log-levels and newlines") changed printk semantics.  printk
lines with multiple KERN_ prefixes are no longer emitted as
before the patch.

 is now included in the output on each additional use.

Remove all uses of multiple KERN_s in formats.

Signed-off-by: Joe Perches 
Signed-off-by: Linus Torvalds

MIPS: BC47xx: Fix SSB irq setup

2009-07-03T14:45:27+00:00

The current ssb irq setup in ssb_mipscore_init has the problem that it
configures some device on some irq without checking that the irq is not
taken by an other device.

For example in my case PCI host is on irq 0 and IPSEC on irq 3.
The current code:
  - store in dev->irq that IPSEC irq is 3 + 2
  - do a set_irq 0->3 on PCI host

But now IPSEC irq is not routed anymore to the mips code and dev->irq is
wrong.  This causes a problem described in [1].

This patch tries to solve the problem by making set_irq configure the
device we want to take the irq on the shared irq0. The previous example
becomes:
  - store in dev->irq that IPSEC irq is 3 + 2
  - do a set_irq 0->3 on PCI host:
  - irq 3 is already taken by IPSEC. do a set_irq 3->0 on IPSEC

I also added some code to print the irq configuration after irq setup to
allow easier debugging. And I add extra checking in ssb_mips_irq to report
device without irq or device with not routed irq.

[1] http://www.danm.de/files/src/bcm5365p/REPORTED_DEVICES

Signed-off-by: Matthieu CASTET 
Acked-by : Michael Buesch 
Tested-by: Florian Fainelli 
Signed-off-by: Ralf Baechle

SSB: BCM47xx: Export ssb_watchdog_timer_set

2009-06-08T15:57:50+00:00

this patch export ssb_watchdog_timer_set to allow to use it in a Linux 
watchdog driver.

Signed-off-by: Matthieu CASTET 
Acked-by : Michael Buesch 
Signed-off-by: Ralf Baechle

b43: Add BCM4307 PCI-ID

2009-03-28T00:13:20+00:00

00:09.0 Network controller [0280]: Broadcom Corporation BCM4307 Ethernet Controller [14e4:4306] (rev 03)
    Subsystem: Broadcom Corporation BCM4307 Ethernet Controller [14e4:4306]
    Flags: bus master, fast devsel, latency 32, IRQ 10
    Memory at d7000000 (32-bit, non-prefetchable) [size=8K]
    Kernel driver in use: b43-pci-bridge
    Kernel modules: ssb

Reported-by: yoann 
Signed-off-by: Michael Buesch 
Signed-off-by: John W. Linville

ssb: remove EXPERIMENTAL dependencies.

2009-03-28T00:13:04+00:00

ssb is not experimental anymore.

Signed-off-by: Michael Buesch 
Signed-off-by: John W. Linville

ssb: Add SPROM fallback support

2009-03-05T19:39:32+00:00

This adds SSB functionality to register a fallback SPROM image from the
architecture setup code.

Weird architectures exist that have half-assed SSB devices without SPROM attached to
their PCI busses. The architecture can register a fallback SPROM image that is
used if no SPROM is found on the SSB device.

Signed-off-by: Michael Buesch 
Cc: Florian Fainelli 
Signed-off-by: John W. Linville

ssb: Add PMU support

2009-02-09T20:03:49+00:00

This adds support for the SSB PMU.
A PMU is found on Low-Power devices.

Signed-off-by: Michael Buesch 
Signed-off-by: John W. Linville

b43/ssb: Add SPROM8 extraction and LP-PHY detection

2009-01-29T20:59:38+00:00

This adds detection code for the LP-PHY and SPROM
extraction code for version 8, which is needed by the LP-PHY and
newer N-PHY.

Signed-off-by: Michael Buesch 
Signed-off-by: John W. Linville