linux-toradex.git/drivers/staging, branch v3.2.48

drm/gma500/cdv: Unpin framebuffer on crtc disable

2013-06-19T01:16:57+00:00

commit 22e7c385a80d771aaf3a15ae7ccea3b0686bbe10 upstream.

The framebuffer needs to be unpinned in the crtc->disable callback
because of previous pinning in psb_intel_pipe_set_base(). This will fix
a memory leak where the framebuffer was released but not unpinned
properly. This patch only affects Cedarview.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113
Reviewed-by: Daniel Vetter 
Signed-off-by: Patrik Jakobsson 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

drm/gma500/psb: Unpin framebuffer on crtc disable

2013-06-19T01:16:57+00:00

commit 820de86a90089ee607d7864538c98a23b503c846 upstream.

The framebuffer needs to be unpinned in the crtc->disable callback
because of previous pinning in psb_intel_pipe_set_base(). This will fix
a memory leak where the framebuffer was released but not unpinned
properly. This patch only affects Poulsbo.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113
Reviewed-by: Daniel Vetter 
Signed-off-by: Patrik Jakobsson 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

drm/gma500: Increase max resolution for mode setting

2013-06-19T01:16:48+00:00

commit cbbd379aa43890f36da934f5af619d2fb8ec3d87 upstream.

By having a higher max resolution we can now set up a virtual
framebuffer that spans several monitors. 4096 should be ok since we're
gen 3 or higher and should be enough for most dual head setups.

Signed-off-by: Patrik Jakobsson 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

staging: comedi: prevent auto-unconfig of manually configured devices

2013-05-30T13:35:15+00:00

commit 7d3135af399e92cf4c9bbc5f86b6c140aab3b88c upstream.

When a low-level comedi driver auto-configures a device, a `struct
comedi_dev_file_info` is allocated (as well as a `struct
comedi_device`) by `comedi_alloc_board_minor()`.  A pointer to the
hardware `struct device` is stored as a cookie in the `struct
comedi_dev_file_info`.  When the low-level comedi driver
auto-unconfigures the device, `comedi_auto_unconfig()` uses the cookie
to find the `struct comedi_dev_file_info` so it can detach the comedi
device from the driver, clean it up and free it.

A problem arises if the user manually unconfigures and reconfigures the
comedi device using the `COMEDI_DEVCONFIG` ioctl so that is no longer
associated with the original hardware device.  The problem is that the
cookie is not cleared, so that a call to `comedi_auto_unconfig()` from
the low-level driver will still find it, detach it, clean it up and free
it.

Stop this problem occurring by always clearing the `hardware_device`
cookie in the `struct comedi_dev_file_info` whenever the
`COMEDI_DEVCONFIG` ioctl call is successful.

Signed-off-by: Ian Abbott 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

staging: vt6656: use free_netdev instead of kfree

2013-05-30T13:34:57+00:00

commit 0a438d5b381e2bdfd5e02d653bf46fcc878356e3 upstream.

use free_netdev() instead of kfree(pDevice->apdev)

Signed-off-by: Hema Prathaban 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

staging: comedi: s626: fix continuous acquisition

2013-04-10T02:20:02+00:00

commit e4317ce877a31dbb9d96375391c1c4ad2210d637 upstream.

For the s626 driver, there is a bug in the handling of asynchronous
commands on the AI subdevice when the stop source is `TRIG_NONE`.  The
command should run continuously until cancelled, but the interrupt
handler stops the command running after the first scan.

The command set-up function `s626_ai_cmd()` contains this code:

	switch (cmd->stop_src) {
	case TRIG_COUNT:
		/*  data arrives as one packet */
		devpriv->ai_sample_count = cmd->stop_arg;
		devpriv->ai_continous = 0;
		break;
	case TRIG_NONE:
		/*  continous acquisition */
		devpriv->ai_continous = 1;
		devpriv->ai_sample_count = 0;
		break;
	}

The interrupt handler `s626_irq_handler()` contains this code:

		if (!(devpriv->ai_continous))
			devpriv->ai_sample_count--;
		if (devpriv->ai_sample_count <= 0) {
			devpriv->ai_cmd_running = 0;
			/* ... */
		}

So `devpriv->ai_sample_count` is only decremented for the `TRIG_COUNT`
case, but `devpriv->ai_cmd_running` is set to 0 (and the command
stopped) regardless.

Fix this in `s626_ai_cmd()` by setting `devpriv->ai_sample_count = 1`
for the `TRIG_NONE` case.  The interrupt handler will not decrement it
so it will remain greater than 0 and the check for stopping the
acquisition will fail.

Signed-off-by: Ian Abbott 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

staging: vt6656: Fix oops on resume from suspend.

2013-03-20T15:03:32+00:00

commit 6987a6dabfc40222ef767f67b57212fe3a0225fb upstream.

Remove usb_put_dev from vt6656_suspend and usb_get_dev
from vt6566_resume.

These are not normally in suspend/resume functions.

Signed-off-by: Malcolm Priestley 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

storvsc: Initialize the sglist

2013-03-20T15:03:16+00:00

commit 9d2696e658ef4f209955ddaa987d43f1a1bd81a1 upstream.

Properly initialize scatterlist before using it.

Signed-off-by: K. Y. Srinivasan 
Signed-off-by: James Bottomley 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

speakup: lower default software speech rate

2013-03-06T03:24:26+00:00

commit cfd757010691eae4e17acc246f74e7622c3a2f05 upstream.

Speech synthesis beginners need a low speech rate, and trained people
want a high speech rate.  A medium speech rate is thus actually not a
good default for neither.  Since trained people will typically know how
to change the rate, better default for a low speech rate, which
beginners can grasp and learn how to increase it afterwards

This was agreed with users on the speakup mailing list.

Signed-off-by: Samuel Thibault 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

staging: comedi: ni_labpc: set up command4 register after command3

2013-03-06T03:24:21+00:00

commit 22056e2b46246d97ff0f7c6e21a77b8daa07f02c upstream.

Tuomas  reported problems getting
meaningful output from a Lab-PC+ in differential mode for AI cmds, but
AI insn reads gave correct readings.  He tracked it down to two
problems, one of which is addressed by this patch.

It seems that writing to the command3 register after writing to the
command4 register in `labpc_ai_cmd()` messes up the differential
reference bit setting in the command4 register.  Set up the command4
register after the command3 register (as in `labpc_ai_rinsn()`) to avoid
the problem.

Thanks to Tuomas for suggesting the fix.

Signed-off-by: Ian Abbott 
Signed-off-by: Ben Hutchings