linux-toradex.git/drivers/staging, branch v4.9.9

staging: greybus: timesync: validate platform state callback

2017-02-09T07:08:30+00:00

commit b17c1bba9cec1727451b906d9a0c209774624873 upstream.

When tearingdown timesync, and not in arche platform, the state platform
callback is not initialized. That will trigger the following NULL
dereferencing.
CallTrace:

 ? gb_timesync_platform_unlock_bus+0x11/0x20 [greybus]
 gb_timesync_teardown+0x85/0xc0 [greybus]
 gb_timesync_svc_remove+0xab/0x190 [greybus]
 gb_svc_del+0x29/0x110 [greybus]
 gb_hd_del+0x14/0x20 [greybus]
 ap_disconnect+0x24/0x60 [gb_es2]
 usb_unbind_interface+0x7a/0x2c0
 __device_release_driver+0x96/0x150
 device_release_driver+0x1e/0x30
 bus_remove_device+0xe7/0x130
 device_del+0x116/0x230
 usb_disable_device+0x97/0x1f0
 usb_disconnect+0x80/0x260
 hub_event+0x5ca/0x10e0
 process_one_work+0x126/0x3b0
 worker_thread+0x55/0x4c0
 ? process_one_work+0x3b0/0x3b0
 kthread+0xc4/0xe0
 ? kthread_park+0xb0/0xb0
 ret_from_fork+0x22/0x30

So, fix that by adding checks before use the callback.

Fixes: 970dc85bd95d ("greybus: timesync: Add timesync core driver")
Signed-off-by: Rui Miguel Silva 
Reviewed-by: Viresh Kumar 
Reviewed-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

s5p-cec: mark PM functions as __maybe_unused again

2017-01-26T07:24:45+00:00

commit eadf081146ec327d6fbbb6aff28e3d9aac329dc6 upstream.

A bugfix removed the two callers of s5p_cec_runtime_suspend
and s5p_cec_runtime_resume, leading to the return of a harmless
warning that I had previously fixed in commit aee8937089b1
("[media] s5p_cec: mark suspend/resume as __maybe_unused"):

staging/media/s5p-cec/s5p_cec.c:234:12: error: ‘s5p_cec_runtime_suspend’ defined but not used [-Werror=unused-function]
staging/media/s5p-cec/s5p_cec.c:242:12: error: ‘s5p_cec_runtime_resume’ defined but not used [-Werror=unused-function]

This adds the __maybe_unused annotations to the function that
were not removed and that are now unused when CONFIG_PM
is disabled.

Fixes: 57b978ada073 ("[media] s5p-cec: fix system and runtime PM integration")

Signed-off-by: Arnd Bergmann 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

staging: media: davinci_vpfe: unlock on error in vpfe_reqbufs()

2017-01-12T10:39:35+00:00

commit c4a407b91f4b644145492e28723f9f880efb1da0 upstream.

We should unlock before returning this error code in vpfe_reqbufs().

Fixes: 622897da67b3 ("[media] davinci: vpfe: add v4l2 video driver support")

Signed-off-by: Dan Carpenter 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

staging: iio: ad7606: fix improper setting of oversampling pins

2017-01-12T10:39:21+00:00

commit b321a38d2407c7e425c54bc09be909a34e49f740 upstream.

The oversampling ratio is controlled using the oversampling pins,
OS [2:0] with OS2 being the MSB control bit, and OS0 the LSB control
bit.

The gpio connected to the OS2 pin is not being set correctly, only OS0
and OS1 pins are being set. Fix the typo to allow proper control of the
oversampling pins.

Signed-off-by: Eva Rachel Retuya 
Fixes: b9618c0 ("staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4")
Acked-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

staging: octeon: Call SET_NETDEV_DEV()

2017-01-12T10:39:05+00:00

commit e7c9a3d9e432200fd4c17855c2c23ac784d6e833 upstream.

The Octeon driver calls into PHYLIB which now checks for
net_device->dev.parent, so make sure we do set it before calling into
any MDIO/PHYLIB related function.

Fixes: ec988ad78ed6 ("phy: Don't increment MDIO bus refcount unless it's a different owner")
Reported-by: Aaro Koskinen 
Signed-off-by: Florian Fainelli 
Signed-off-by: Greg Kroah-Hartman

staging: comedi: ni_mio_common: fix E series ni_ai_insn_read() data

2017-01-09T07:32:18+00:00

commit 857a661020a2de3a0304edf33ad656abee100891 upstream.

Commit 0557344e2149 ("staging: comedi: ni_mio_common: fix local var for
32-bit read") changed the type of local variable `d` from `unsigned
short` to `unsigned int` to fix a bug introduced in
commit 9c340ac934db ("staging: comedi: ni_stc.h: add read/write
callbacks to struct ni_private") when reading AI data for NI PCI-6110
and PCI-6111 cards.  Unfortunately, other parts of the function rely on
the variable being `unsigned short` when an offset value in local
variable `signbits` is added to `d` before writing the value to the
`data` array:

			d += signbits;
		  	data[n] = d;

The `signbits` variable will be non-zero in bipolar mode, and is used to
convert the hardware's 2's complement, 16-bit numbers to Comedi's
straight binary sample format (with 0 representing the most negative
voltage).  This breaks because `d` is now 32 bits wide instead of 16
bits wide, so after the addition of `signbits`, `data[n]` ends up being
set to values above 65536 for negative voltages.  This affects all
supported "E series" cards except PCI-6143 (and PXI-6143). Fix it by
ANDing the value written to the `data[n]` with the mask 0xffff.

Fixes: 0557344e2149 ("staging: comedi: ni_mio_common: fix local var for 32-bit read")
Signed-off-by: Ian Abbott 
Signed-off-by: Greg Kroah-Hartman

staging: comedi: ni_mio_common: fix M Series ni_ai_insn_read() data mask

2017-01-09T07:32:18+00:00

commit 655c4d442d1213b617926cc6d54e2a9a793fb46b upstream.

For NI M Series cards, the Comedi `insn_read` handler for the AI
subdevice is broken due to ANDing the value read from the AI FIFO data
register with an incorrect mask.  The incorrect mask clears all but the
most significant bit of the sample data.  It should preserve all the
sample data bits.  Correct it.

Fixes: 817144ae7fda ("staging: comedi: ni_mio_common: remove unnecessary use of 'board->adbits'")
Signed-off-by: Ian Abbott 
Signed-off-by: Greg Kroah-Hartman

staging: lustre: ldlm: pl_recalc time handling is wrong

2017-01-09T07:32:18+00:00

commit b8cb86fd95bb461c3496e1f4b4083b198c963a9c upstream.

James Simmons reports:
> The ldlm_pool field pl_recalc_time is set to the current
> monotonic clock value but the interval period is calculated
> with the wall clock. This means the interval period will
> always be far larger than the pl_recalc_period, which is
> just a small interval time period. The correct thing to
> do is to use monotomic clock current value instead of the
> wall clocks value when calculating recalc_interval_sec.

This broke when I converted the 32-bit get_seconds() into
ktime_get_{real_,}seconds() inconsistently. Either
one of those two would have worked, but mixing them
does not.

Staying with the original intention of the patch, this
changes the ktime_get_seconds() calls into ktime_get_real_seconds(),
using real time instead of mononic time.

Fixes: 8f83409cf238 ("staging/lustre: use 64-bit time for pl_recalc")
Reported-by: James Simmons 
Signed-off-by: Arnd Bergmann 
Reviewed-by: James Simmons 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

staging/lustre/osc: Revert erroneous list_for_each_entry_safe use

2017-01-09T07:32:18+00:00

commit cd15dd6ef4ea11df87f717b8b1b83aaa738ec8af upstream.

I have been having a lot of unexplainable crashes in osc_lru_shrink
lately that I could not see a good explanation for and then I found
this patch that slip under the radar somehow that incorrectly
converted while loop for lru list iteration into
list_for_each_entry_safe totally ignoring that in the body of
the loop we drop spinlocks guarding this list and move list entries
around.
Not sure why it was not showing up right away, perhaps some of the
more recent LRU changes committed caused some extra pressure on this
code that finally highlighted the breakage.

Reverts: 8adddc36b1fc ("staging: lustre: osc: Use list_for_each_entry_safe")
CC: Bhaktipriya Shridhar 
Signed-off-by: Oleg Drokin 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2016-11-13T18:13:33+00:00

Pull staging/IIO fixes from Grek KH:
 "Here are a few small staging and iio driver fixes for reported issues.

  The last one was cherry-picked from my -next branch to resolve a build
  warning that Arnd fixed, in his quest to be able to turn
  -Wmaybe-uninitialized back on again. That patch, and all of the
  others, have been in linux-next for a while with no reported issues"

* tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: maxim_thermocouple: detect invalid storage size in read()
  staging: nvec: remove managed resource from PS2 driver
  Revert "staging: nvec: ps2: change serio type to passthrough"
  drivers: staging: nvec: remove bogus reset command for PS/2 interface
  staging: greybus: arche-platform: fix device reference leak
  staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value
  staging: sm750fb: Fix bugs introduced by early commits
  iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation.
  iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
  iio: st_sensors: fix scale configuration for h3lis331dl
  staging: iio: ad5933: avoid uninitialized variable in error case