linux-toradex.git/drivers/target/target_core_rd.c, branch v4.0.2

target: Drop left-over fabric_max_sectors attribute

2015-01-09T23:22:05+00:00

Now that fabric_max_sectors is no longer used to enforce the maximum
I/O size, go ahead and drop it's left-over usage in target-core and
associated backend drivers.

Cc: Christoph Hellwig 
Cc: Martin K. Petersen 
Cc: Roland Dreier 
Signed-off-by: Nicholas Bellinger

target/rd: Convert to external rd_mcp_backend_dev_attrs

2014-12-02T05:36:02+00:00

This patch converts RAMDISK to use an external set of device attributes,
and utilizes target_core_backend_configfs.h macros to generate a default
set of configfs extended-attr handlers.

It calls target_core_setup_sub_cits() to setup the initial config_item_type
based on existing target_core_configfs.c defaults, and using configfs_attribute
generated by DEF_TB_DEFAULT_ATTRIBS(rc_mcp) populates rd_mcp_backend_dev_attrs[]

It introduces no functional change for existing RD_MCP device attributes.

Signed-off-by: Nicholas Bellinger

target/rd: T10-Dif: RAM disk is allocating more space than required.

2014-04-07T08:48:53+00:00

Ram disk is allocating 8x more space than required for diff data.
For large RAM disk test, there is small potential for memory
starvation.

(Use block_size when calculating total_sg_needed - sagi + nab)

Signed-off-by: Giridhar Malavali 
Signed-off-by: Quinn Tran 
Cc:  #3.14+
Signed-off-by: Nicholas Bellinger

target/rd: Add DIF protection into rd_execute_rw

2014-01-19T02:22:06+00:00

This patch adds support for DIF protection into rd_execute_rw() code
for WRITE/READ I/O using sbc_dif_verify_[write,read]() logic.

It also adds rd_get_prot_table() for locating protection SGLs
assoicated with the ramdisk backend device.

v2 changes:
  - Make rd_execute_rw() to u32 sectors count instead of sector_t
  - Drop SCF_PROT usage

Cc: Martin K. Petersen 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Sagi Grimberg 
Cc: Or Gerlitz 
Signed-off-by: Nicholas Bellinger

target/rd: Add support for protection SGL setup + release

2014-01-19T02:22:05+00:00

This patch adds rd_build_prot_space() + rd_release_prot_space() logic
to setup + release protection information scatterlists.

It also adds rd_init_prot() + rd_free_prot() se_subsystem_api
callbacks used by target core code for setup + release of
protection information.

v2 changes:
  - Drop unused sg_table from rd_release_prot_space (Wei)
  - Drop rd_release_prot_space call from rd_free_device

Cc: Martin K. Petersen 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Sagi Grimberg 
Cc: Or Gerlitz 
Signed-off-by: Nicholas Bellinger

target/rd: Refactor rd_build_device_space + rd_release_device_space

2014-01-19T02:22:05+00:00

This patch refactors rd_build_device_space() + rd_release_device_space()
into rd_allocate_sgl_table() + rd_release_device_space() so that they
may be used seperatly for setup + release of protection information
scatterlists.

Also add explicit memset of pages within rd_allocate_sgl_table() based
upon passed 'init_payload' value.

v2 changes:
  - Drop unused sg_table from rd_release_device_space (Wei)

Cc: Martin K. Petersen 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Sagi Grimberg 
Cc: Or Gerlitz 
Signed-off-by: Nicholas Bellinger

target: Core does not need blkdev.h

2013-11-12T21:45:24+00:00

Target core does not depend on the block layer, only backstores that
use the block layer do.

Signed-off-by: Andy Grover 
Signed-off-by: Nicholas Bellinger

2013-09-11T03:23:36+00:00

Update copyright ownership/year information for target-core,
loopback, iscsi-target, tcm_qla2xx, vhost and iser-target.

Signed-off-by: Nicholas Bellinger

target: Allow sbc_ops->execute_rw() to accept SGLs + data_direction

2013-09-09T21:29:28+00:00

COMPARE_AND_WRITE expects to be able to send down a DMA_FROM_DEVICE
to obtain the necessary READ payload for comparision against the
first half of the WRITE payload containing the verify user data.

Currently virtual backends expect to internally reference SGLs,
SGL nents, and data_direction, so change IBLOCK, FILEIO and RD
sbc_ops->execute_rw() to accept this values as function parameters.

Also add default sbc_execute_rw() handler for the typical case for
cmd->execute_rw() submission using cmd->t_data_sg, cmd->t_data_nents,
and cmd->data_direction).

v2 Changes:
  - Add SCF_COMPARE_AND_WRITE command flag
  - Use sbc_execute_rw() for normal cmd->execute_rw() submission
    with expected se_cmd members.

Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Martin Petersen 
Cc: Chris Mason 
Cc: James Bottomley 
Cc: Nicholas Bellinger 
Signed-off-by: Nicholas Bellinger

target: Don't allocate pages for NULLIO devices

2013-06-14T07:27:36+00:00

Signed-off-by: Andy Grover 
Signed-off-by: Nicholas Bellinger