linux-toradex.git/drivers/target/target_core_spc.c, branch v4.2.2

target: Fix handling of small allocation lengths in REPORT LUNS

2015-08-19T04:51:54+00:00

REPORT LUNS should not fail just because the allocation length is less
than 16.  The relevant section of SPC-4 is:

  4.2.5.6 Allocation length

  The ALLOCATION LENGTH field specifies the maximum number of bytes or
  blocks that an application client has allocated in the Data-In
  Buffer. The ALLOCATION LENGTH field specifies bytes unless a
  different requirement is stated in the command definition.

  An allocation length of zero specifies that no data shall be
  transferred. This condition shall not be considered an error.

So we should just truncate our response rather than return an error.

Signed-off-by: Roland Dreier 
Signed-off-by: Spencer Baugh 
Signed-off-by: Nicholas Bellinger

target: REPORT LUNS should return LUN 0 even for dynamic ACLs

2015-08-03T05:12:18+00:00

If an initiator doesn't have any real LUNs assigned, we should report
LUN 0 and a LUN list length of 1.  Some versions of Solaris at least
go beserk if we report a LUN list length of 0.

Signed-off-by: Roland Dreier 
Cc:  # v3.1+
Signed-off-by: Nicholas Bellinger

target: Add extra TYPE_DISK + protection checks for INQUIRY SPT

2015-07-07T01:07:17+00:00

Cc: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger

target/spc: Set SPT correctly in Extended INQUIRY Data VPD page

2015-07-07T01:07:03+00:00

LIO supports protection types 1,3 so setting a hard-coded SPT=3
is fine for now.

Signed-off-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2015-07-04T21:13:43+00:00

Pull SCSI target updates from Nicholas Bellinger:
 "It's been a busy development cycle for target-core in a number of
  different areas.

  The fabric API usage for se_node_acl allocation is now within
  target-core code, dropping the external API callers for all fabric
  drivers tree-wide.

  There is a new conversion to RCU hlists for se_node_acl and
  se_portal_group LUN mappings, that turns fast-past LUN lookup into a
  completely lockless code-path.  It also removes the original
  hard-coded limitation of 256 LUNs per fabric endpoint.

  The configfs attributes for backends can now be shared between core
  and driver code, allowing existing drivers to use common code while
  still allowing flexibility for new backend provided attributes.

  The highlights include:

   - Merge sbc_verify_dif_* into common code (sagi)
   - Remove iscsi-target support for obsolete IFMarker/OFMarker
     (Christophe Vu-Brugier)
   - Add bidi support in target/user backend (ilias + vangelis + agover)
   - Move se_node_acl allocation into target-core code (hch)
   - Add crc_t10dif_update common helper (akinobu + mkp)
   - Handle target-core odd SGL mapping for data transfer memory
     (akinobu)
   - Move transport ID handling into target-core (hch)
   - Move task tag into struct se_cmd + support 64-bit tags (bart)
   - Convert se_node_acl->device_list[] to RCU hlist (nab + hch +
     paulmck)
   - Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch +
     paulmck)
   - Simplify target backend driver registration (hch)
   - Consolidate + simplify target backend attribute implementations
     (hch + nab)
   - Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch)
   - Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab)
   - Drop unnecessary core_tpg_register TFO parameter (nab)
   - Use 64-bit LUNs tree-wide (hannes)
   - Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits)
  target: Bump core version to v5.0
  target: remove target_core_configfs.h
  target: remove unused TARGET_CORE_CONFIG_ROOT define
  target: consolidate version defines
  target: implement WRITE_SAME with UNMAP bit using ->execute_unmap
  target: simplify UNMAP handling
  target: replace se_cmd->execute_rw with a protocol_data field
  target/user: Fix inconsistent kmap_atomic/kunmap_atomic
  target: Send UA when changing LUN inventory
  target: Send UA upon LUN RESET tmr completion
  target: Send UA on ALUA target port group change
  target: Convert se_lun->lun_deve_lock to normal spinlock
  target: use 'se_dev_entry' when allocating UAs
  target: Remove 'ua_nacl' pointer from se_ua structure
  target_core_alua: Correct UA handling when switching states
  xen-scsiback: Fix compile warning for 64-bit LUN
  target: Remove TARGET_MAX_LUNS_PER_TRANSPORT
  target: use 64-bit LUNs
  target: Drop duplicate + unused se_dev_check_wce
  target: Drop unnecessary core_tpg_register TFO parameter
  ...

target: Minimize SCSI header #include directives

2015-06-02T15:03:25+00:00

Only include SCSI initiator header files in target code that needs
these header files, namely the SCSI pass-through code and the tcm_loop
driver. Change SCSI_SENSE_BUFFERSIZE into TRANSPORT_SENSE_BUFFER in
target code because the former is intended for initiator code and the
latter for target code. With this patch the only initiator include
directives in target code that remain are as follows:

$ git grep -nHE 'include .scsi/(scsi.h|scsi_host.h|scsi_device.h|scsi_cmnd.h)' drivers/target drivers/infiniband/ulp/{isert,srpt} drivers/usb/gadget/legacy/tcm_*.[ch] drivers/{vhost,xen} include/{target,trace/events/target.h}
drivers/target/loopback/tcm_loop.c:29:#include 
drivers/target/loopback/tcm_loop.c:31:#include 
drivers/target/loopback/tcm_loop.c:32:#include 
drivers/target/loopback/tcm_loop.c:33:#include 
drivers/target/target_core_pscsi.c:39:#include 
drivers/target/target_core_pscsi.c:40:#include 
drivers/xen/xen-scsiback.c:52:#include  /* SG_ALL */

Signed-off-by: Bart Van Assche 
Reviewed-by: Christoph Hellwig 
Signed-off-by: James Bottomley

target: Drop lun_sep_lock for se_lun->lun_se_dev RCU usage

2015-06-01T07:27:38+00:00

With se_port and t10_alua_tg_pt_gp_member being absored into se_lun,
there is no need for an extra lock to protect se_lun->lun_se_dev
assignment.

This patch also converts backend drivers to use call_rcu() release
to allow any se_device readers to complete.  The call_rcu() instead
of kfree_rcu() is required here because se_device is embedded into
the backend driver specific structure.

Also, convert se_lun->lun_stats to use atomic_long_t within the
target_complete_ok_work() completion callback, and add FIXME for
transport_lookup_tmr_lun() with se_lun->lun_ref.

Finally, update sbp_update_unit_directory() special case usage with
proper rcu_dereference_raw() and configfs symlink comment.

Reported-by: Christoph Hellwig 
Reviewed-by: Hannes Reinecke 
Cc: Paul E. McKenney 
Cc: Chris Boot 
Signed-off-by: Nicholas Bellinger

target: Subsume se_port + t10_alua_tg_pt_gp_member into se_lun

2015-06-01T07:26:38+00:00

This patch eliminates all se_port + t10_alua_tg_pt_gp_member usage,
and converts current users to direct se_lun pointer dereference.

This includes the removal of core_export_port(), core_release_port()
core_dev_export() and core_dev_unexport().  Along with conversion
of special case se_lun pointer dereference within PR ALL_TG_PT=1
and ALUA access state transition UNIT_ATTENTION handling.

Also, update core_enable_device_list_for_node() to reference the
new per se_lun->lun_deve_list when creating a new entry, or
replacing an existing one via RCU.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Nicholas Bellinger

target: Convert se_node_acl->device_list[] to RCU hlist

2015-06-01T07:23:46+00:00

This patch converts se_node_acl->device_list[] table for mappedluns
to modern RCU hlist_head usage in order to support an arbitrary number
of node_acl lun mappings.

It converts transport_lookup_*_lun() fast-path code to use RCU read path
primitives when looking up se_dev_entry.  It adds a new hlist_head at
se_node_acl->lun_entry_hlist for this purpose.

For transport_lookup_cmd_lun() code, it works with existing per-cpu
se_lun->lun_ref when associating se_cmd with se_lun + se_device.
Also, go ahead and update core_create_device_list_for_node() +
core_free_device_list_for_node() to use ->lun_entry_hlist.

It also converts se_dev_entry->pr_ref_count access to use modern
struct kref counting, and updates core_disable_device_list_for_node()
to kref_put() and block on se_deve->pr_comp waiting for outstanding PR
special-case PR references to drop, then invoke kfree_rcu() to wait
for the RCU grace period to complete before releasing memory.

So now that se_node_acl->lun_entry_hlist fast path access uses RCU
protected pointers, go ahead and convert remaining non-fast path
RCU updater code using ->lun_entry_lock to struct mutex to allow
callers to block while walking se_node_acl->lun_entry_hlist.

Finally drop the left-over core_clear_initiator_node_from_tpg() that
originally cleared lun_access during se_node_acl shutdown, as post
RCU conversion it now becomes duplicated logic.

Reviewed-by: Hannes Reinecke 
Cc: Christoph Hellwig 
Cc: Sagi Grimberg 
Cc: Paul E. McKenney 
Signed-off-by: Nicholas Bellinger

target: remove the get_fabric_proto_ident method

2015-05-31T05:42:30+00:00

Now that we store the protocol identifier in the tpg structure we don't
need this method.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Nicholas Bellinger