linux-toradex.git/drivers/target/target_core_tmr.c, branch v4.9.95

target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK

2018-01-17T08:38:54+00:00

commit 1c21a48055a67ceb693e9c2587824a8de60a217c upstream.

This patch fixes bug where early se_cmd exceptions that occur
before backend execution can result in use-after-free if/when
a subsequent ABORT_TASK occurs for the same tag.

Since an early se_cmd exception will have had se_cmd added to
se_session->sess_cmd_list via target_get_sess_cmd(), it will
not have CMD_T_COMPLETE set by the usual target_complete_cmd()
backend completion path.

This causes a subsequent ABORT_TASK + __target_check_io_state()
to signal ABORT_TASK should proceed.  As core_tmr_abort_task()
executes, it will bring the outstanding se_cmd->cmd_kref count
down to zero releasing se_cmd, after se_cmd has already been
queued with error status into fabric driver response path code.

To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is
set at target_get_sess_cmd() time, and cleared immediately before
backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE
is set.

Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to
determine when an early exception has occured, and avoid aborting
this se_cmd since it will have already been queued into fabric
driver response path code.

Reported-by: Donald White 
Cc: Donald White 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target: Fix kref->refcount underflow in transport_cmd_finish_abort

2017-06-29T11:00:30+00:00

commit 73d4e580ccc5c3e05cea002f18111f66c9c07034 upstream.

This patch fixes a se_cmd->cmd_kref underflow during CMD_T_ABORTED
when a fabric driver drops it's second reference from below the
target_core_tmr.c based callers of transport_cmd_finish_abort().

Recently with the conversion of kref to refcount_t, this bug was
manifesting itself as:

[705519.601034] refcount_t: underflow; use-after-free.
[705519.604034] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 20116.512 msecs
[705539.719111] ------------[ cut here ]------------
[705539.719117] WARNING: CPU: 3 PID: 26510 at lib/refcount.c:184 refcount_sub_and_test+0x33/0x51

Since the original kref atomic_t based kref_put() didn't check for
underflow and only invoked the final callback when zero was reached,
this bug did not manifest in practice since all se_cmd memory is
using preallocated tags.

To address this, go ahead and propigate the existing return from
transport_put_cmd() up via transport_cmd_finish_abort(), and
change transport_cmd_finish_abort() + core_tmr_handle_tas_abort()
callers to only do their local target_put_sess_cmd() if necessary.

Reported-by: Bart Van Assche 
Tested-by: Bart Van Assche 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Cc: Christoph Hellwig 
Cc: Himanshu Madhani 
Cc: Sagi Grimberg 
Tested-by: Gary Guo 
Tested-by: Chu Yuan Lin 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target: Drop incorrect ABORT_TASK put for completed commands

2016-03-06T04:24:47+00:00

This patch fixes a recent ABORT_TASK regression associated
with commit febe562c, where a left-over target_put_sess_cmd()
would still be called when __target_check_io_state() detected
a command has already been completed, and explicit ABORT must
be avoided.

Note commit febe562c dropped the local kref_get_unless_zero()
check in core_tmr_abort_task(), but did not drop this extra
corresponding target_put_sess_cmd() in the failure path.

So go ahead and drop this now bogus target_put_sess_cmd(),
and avoid this potential use-after-free.

Reported-by: Dan Lane 
Cc: Quinn Tran 
Cc: Himanshu Madhani 
Cc: Sagi Grimberg 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Andy Grover 
Cc: Mike Christie 
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Nicholas Bellinger

target: Fix remote-port TMR ABORT + se_cmd fabric stop

2016-02-05T23:40:34+00:00

To address the bug where fabric driver level shutdown
of se_cmd occurs at the same time when TMR CMD_T_ABORTED
is happening resulting in a -1 ->cmd_kref, this patch
adds a CMD_T_FABRIC_STOP bit that is used to determine
when TMR + driver I_T nexus shutdown is happening
concurrently.

It changes target_sess_cmd_list_set_waiting() to obtain
se_cmd->cmd_kref + set CMD_T_FABRIC_STOP, and drop local
reference in target_wait_for_sess_cmds() and invoke extra
target_put_sess_cmd() during Task Aborted Status (TAS)
when necessary.

Also, it adds a new target_wait_free_cmd() wrapper around
transport_wait_for_tasks() for the special case within
transport_generic_free_cmd() to set CMD_T_FABRIC_STOP,
and is now aware of CMD_T_ABORTED + CMD_T_TAS status
bits to know when an extra transport_put_cmd() during
TAS is required.

Note transport_generic_free_cmd() is expected to block on
cmd->cmd_wait_comp in order to follow what iscsi-target
expects during iscsi_conn context se_cmd shutdown.

Cc: Quinn Tran 
Cc: Himanshu Madhani 
Cc: Sagi Grimberg 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Andy Grover 
Cc: Mike Christie 
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger

target: Fix TAS handling for multi-session se_node_acls

2016-02-03T22:10:04+00:00

This patch fixes a bug in TMR task aborted status (TAS)
handling when multiple sessions are connected to the
same target WWPN endpoint and se_node_acl descriptor,
resulting in TASK_ABORTED status to not be generated
for aborted se_cmds on the remote port.

This is due to core_tmr_handle_tas_abort() incorrectly
comparing se_node_acl instead of se_session, for which
the multi-session case is expected to be sharing the
same se_node_acl.

Instead, go ahead and update core_tmr_handle_tas_abort()
to compare tmr_sess + cmd->se_sess in order to determine
if the LUN_RESET was received on a different I_T nexus,
and TASK_ABORTED status response needs to be generated.

Reviewed-by: Christoph Hellwig 
Cc: Quinn Tran 
Cc: Himanshu Madhani 
Cc: Sagi Grimberg 
Cc: Hannes Reinecke 
Cc: Andy Grover 
Cc: Mike Christie 
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger

target: Fix LUN_RESET active TMR descriptor handling

2016-02-03T22:09:47+00:00

This patch fixes a NULL pointer se_cmd->cmd_kref < 0
refcount bug during TMR LUN_RESET with active TMRs,
triggered during se_cmd + se_tmr_req descriptor
shutdown + release via core_tmr_drain_tmr_list().

To address this bug, go ahead and obtain a local
kref_get_unless_zero(&se_cmd->cmd_kref) for active I/O
to set CMD_T_ABORTED, and transport_wait_for_tasks()
followed by the final target_put_sess_cmd() to drop
the local ->cmd_kref.

Also add two new checks within target_tmr_work() to
avoid CMD_T_ABORTED -> TFO->queue_tm_rsp() callbacks
ahead of invoking the backend -> fabric put in
transport_cmd_check_stop_to_fabric().

For good measure, also change core_tmr_release_req()
to use list_del_init() ahead of se_tmr_req memory
free.

Reviewed-by: Quinn Tran 
Cc: Himanshu Madhani 
Cc: Sagi Grimberg 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Andy Grover 
Cc: Mike Christie 
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger

target: Fix LUN_RESET active I/O handling for ACK_KREF

2016-02-03T22:09:07+00:00

This patch fixes a NULL pointer se_cmd->cmd_kref < 0
refcount bug during TMR LUN_RESET with active se_cmd
I/O, that can be triggered during se_cmd descriptor
shutdown + release via core_tmr_drain_state_list() code.

To address this bug, add common __target_check_io_state()
helper for ABORT_TASK + LUN_RESET w/ CMD_T_COMPLETE
checking, and set CMD_T_ABORTED + obtain ->cmd_kref for
both cases ahead of last target_put_sess_cmd() after
TFO->aborted_task() -> transport_cmd_finish_abort()
callback has completed.

It also introduces SCF_ACK_KREF to determine when
transport_cmd_finish_abort() needs to drop the second
extra reference, ahead of calling target_put_sess_cmd()
for the final kref_put(&se_cmd->cmd_kref).

It also updates transport_cmd_check_stop() to avoid
holding se_cmd->t_state_lock while dropping se_cmd
device state via target_remove_from_state_list(), now
that core_tmr_drain_state_list() is holding the
se_device lock while checking se_cmd state from
within TMR logic.

Finally, move transport_put_cmd() release of SGL +
TMR + extended CDB memory into target_free_cmd_mem()
in order to avoid potential resource leaks in TMR
ABORT_TASK + LUN_RESET code-paths.  Also update
target_release_cmd_kref() accordingly.

Reviewed-by: Quinn Tran 
Cc: Himanshu Madhani 
Cc: Sagi Grimberg 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Andy Grover 
Cc: Mike Christie 
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2016-01-21T01:20:53+00:00

Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

   - Introduce configfs support for unlocked configfs_depend_item()
     (krzysztof + andrezej)
   - Conversion of usb-gadget target driver to new function registration
     interface (andrzej + sebastian)
   - Enable qla2xxx FC target mode support for Extended Logins (himansu +
     giridhar)
   - Enable qla2xxx FC target mode support for Exchange Offload (himansu +
     giridhar)
   - Add qla2xxx FC target mode irq affinity notification + selective
     command queuing.  (quinn + himanshu)
   - Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi +
     nab)
   - Convert se_node_acl configfs deletion + se_node_acl->queue_depth to
     proper se_session->sess_kref + target_get_session() usage.  (hch +
     sagi + nab)
   - Fix long-standing race between se_node_acl->acl_kref get and
     get_initiator_node_acl() lookup.  (hch + nab)
   - Fix target/user block-size handling, and make sure netlink reaches
     all network namespaces (sheng + andy)

  Note there is an outstanding bug-fix series for remote I_T nexus port
  TMR LUN_RESET has been posted and still being tested, and will likely
  become post -rc1 material at this point"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits)
  scsi: qla2xxxx: avoid type mismatch in comparison
  target/user: Make sure netlink would reach all network namespaces
  target: Obtain se_node_acl->acl_kref during get_initiator_node_acl
  target: Convert ACL change queue_depth se_session reference usage
  iscsi-target: Fix potential dead-lock during node acl delete
  ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage
  tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage
  tcm_fc: Wait for command completion before freeing a session
  target: Fix a memory leak in target_dev_lba_map_store()
  target: Support aborting tasks with a 64-bit tag
  usb/gadget: Remove set-but-not-used variables
  target: Remove an unused variable
  target: Fix indentation in target_core_configfs.c
  target/user: Allow user to set block size before enabling device
  iser-target: Fix non negative ERR_PTR isert_device_get usage
  target/fcoe: Add tag support to tcm_fc
  qla2xxx: Check for online flag instead of active reset when transmitting responses
  qla2xxx: Set all queues to 4k
  qla2xxx: Disable ZIO at start time.
  qla2xxx: Move atioq to a different lock to reduce lock contention
  ...

target: Fix spelling + remove set-but-not-used variables

2016-01-06T21:38:37+00:00

Signed-off-by: Bart Van Assche 
Reviewed-by: Sagi Grimberg 
Reviewed-by: Andy Grover 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Nicholas Bellinger

target: Invoke release_cmd() callback without holding a spinlock

2015-11-29T03:33:23+00:00

This patch fixes the following kernel warning because it avoids that
IRQs are disabled while ft_release_cmd() is invoked (fc_seq_set_resp()
invokes spin_unlock_bh()):

WARNING: CPU: 3 PID: 117 at kernel/softirq.c:150 __local_bh_enable_ip+0xaa/0x110()
Call Trace:
 [] dump_stack+0x4f/0x7b
 [] warn_slowpath_common+0x8a/0xc0
 [] warn_slowpath_null+0x1a/0x20
 [] __local_bh_enable_ip+0xaa/0x110
 [] _raw_spin_unlock_bh+0x39/0x40
 [] fc_seq_set_resp+0xe4/0x100 [libfc]
 [] ft_free_cmd+0x4a/0x90 [tcm_fc]
 [] ft_release_cmd+0x12/0x20 [tcm_fc]
 [] target_release_cmd_kref+0x56/0x90 [target_core_mod]
 [] target_put_sess_cmd+0xc0/0x110 [target_core_mod]
 [] transport_release_cmd+0x41/0x70 [target_core_mod]
 [] transport_generic_free_cmd+0x35/0x420 [target_core_mod]

Signed-off-by: Bart Van Assche 
Acked-by: Joern Engel 
Reviewed-by: Andy Grover 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger