linux-toradex.git/drivers/target, branch v3.18.13

iscsi target: fix oops when adding reject pdu

2015-04-24T21:14:07+00:00

[ Upstream commit b815fc12d4dd2b5586184fb4f867caff05a810d4 ]

This fixes a oops due to a double list add when adding a reject PDU for
iscsit_allocate_iovecs allocation failures. The cmd has already been
added to the conn_cmd_list in iscsit_setup_scsi_cmd, so this has us call
iscsit_reject_cmd.

Note that for ERL0 the reject PDU is not actually sent, so this patch
is not completely tested. Just verified we do not oops. The problem is the
add reject functions return -1 which is returned all the way up to
iscsi_target_rx_thread which for ERL0 will drop the connection.

Signed-off-by: Mike Christie 
Cc:  # v3.10+
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Sasha Levin

tcm_fc: missing curly braces in ft_invl_hw_context()

2015-04-17T00:11:30+00:00

[ Upstream commit d556546e7ecd9fca199df4698943024d40044f8e ]

This patch adds a missing set of conditional check braces in
ft_invl_hw_context() originally introduced by commit dcd998ccd
when handling DDP failures in ft_recv_write_data() code.

 commit dcd998ccdbf74a7d8fe0f0a44e85da1ed5975946
 Author: Kiran Patil 
 Date:   Wed Aug 3 09:20:01 2011 +0000

    tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data

Signed-off-by: Dan Carpenter 
Cc: Kiran Patil 
Cc:  # 3.1+
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Sasha Levin

target/pscsi: Fix NULL pointer dereference in get_device_type

2015-03-28T14:23:20+00:00

[ Upstream commit 215a8fe4198f607f34ecdbc9969dae783d8b5a61 ]

This patch fixes a NULL pointer dereference OOPs with pSCSI backends
within target_core_stat.c code.  The bug is caused by a configfs attr
read if no pscsi_dev_virt->pdv_sd has been configured.

Reported-by: Olaf Hering 
Cc: 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Sasha Levin

iscsi-target: Avoid early conn_logout_comp for iser connections

2015-03-28T14:23:13+00:00

[ Upstream commit f068fbc82e7696d67b1bb8189306865bedf368b6 ]

This patch fixes a iser specific logout bug where early complete()
of conn->conn_logout_comp in iscsit_close_connection() was causing
isert_wait4logout() to complete too soon, triggering a use after
free NULL pointer dereference of iscsi_conn memory.

The complete() was originally added for traditional iscsi-target
when a ISCSI_LOGOUT_OP failed in iscsi_target_rx_opcode(), but given
iser-target does not wait in logout failure, this special case needs
to be avoided.

Reported-by: Sagi Grimberg 
Cc: Sagi Grimberg 
Cc: Slava Shwartsman 
Cc:  # v3.10+
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Sasha Levin

target: Fix virtual LUN=0 target_configure_device failure OOPs

2015-03-28T14:23:05+00:00

[ Upstream commit 5f7da044f8bc1cfb21c962edf34bd5699a76e7ae ]

This patch fixes a NULL pointer dereference triggered by a late
target_configure_device() -> alloc_workqueue() failure that results
in target_free_device() being called with DF_CONFIGURED already set,
which subsequently OOPses in destroy_workqueue() code.

Currently this only happens at modprobe target_core_mod time when
core_dev_setup_virtual_lun0() -> target_configure_device() fails,
and the explicit target_free_device() gets called.

To address this bug originally introduced by commit 0fd97ccf45, go
ahead and move DF_CONFIGURED to end of target_configure_device()
code to handle this special failure case.

Reported-by: Claudio Fleiner 
Cc: Claudio Fleiner 
Cc: Christoph Hellwig 
Cc:  # v3.7+
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Sasha Levin

target: Fix reference leak in target_get_sess_cmd() error path

2015-03-28T14:22:58+00:00

[ Upstream commit 7544e597343e2166daba3f32e4708533aa53c233 ]

This patch fixes a se_cmd->cmd_kref leak buf when se_sess->sess_tearing_down
is true within target_get_sess_cmd() submission path code.

This se_cmd reference leak can occur during active session shutdown when
ack_kref=1 is passed by target_submit_cmd_[map_sgls,tmr]() callers.

Signed-off-by: Bart Van Assche 
Cc:  # 3.6+
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Sasha Levin

target: Check for LBA + sectors wrap-around in sbc_parse_cdb

2015-03-14T19:37:19+00:00

commit aa179935edea9a64dec4b757090c8106a3907ffa upstream.

This patch adds a check to sbc_parse_cdb() in order to detect when
an LBA + sector vs. end-of-device calculation wraps when the LBA is
sufficently large enough (eg: 0xFFFFFFFFFFFFFFFF).

Cc: Martin Petersen 
Cc: Christoph Hellwig 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Sasha Levin

target: Add missing WRITE_SAME end-of-device sanity check

2015-03-14T19:37:19+00:00

commit 8e575c50a171f2579e367a7f778f86477dfdaf49 upstream.

This patch adds a check to sbc_setup_write_same() to verify
the incoming WRITE_SAME LBA + number of blocks does not exceed
past the end-of-device.

Also check for potential LBA wrap-around as well.

Reported-by: Bart Van Assche 
Cc: Martin Petersen 
Cc: Christoph Hellwig 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Sasha Levin

target: Fix PR_APTPL_BUF_LEN buffer size limitation

2015-03-14T19:37:18+00:00

commit f161d4b44d7cc1dc66b53365215227db356378b1 upstream.

This patch addresses the original PR_APTPL_BUF_LEN = 8k limitiation
for write-out of PR APTPL metadata that Martin has recently been
running into.

It changes core_scsi3_update_and_write_aptpl() to use vzalloc'ed
memory instead of kzalloc, and increases the default hardcoded
length to 256k.

It also adds logic in core_scsi3_update_and_write_aptpl() to double
the original length upon core_scsi3_update_aptpl_buf() failure, and
retries until the vzalloc'ed buffer is large enough to accommodate
the outgoing APTPL metadata.

Reported-by: Martin Svec 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Sasha Levin

iscsi-target: Drop problematic active_ts_list usage

2015-03-06T22:52:59+00:00

commit 3fd7b60f2c7418239d586e359e0c6d8503e10646 upstream.

This patch drops legacy active_ts_list usage within iscsi_target_tq.c
code.  It was originally used to track the active thread sets during
iscsi-target shutdown, and is no longer used by modern upstream code.

Two people have reported list corruption using traditional iscsi-target
and iser-target with the following backtrace, that appears to be related
to iscsi_thread_set->ts_list being used across both active_ts_list and
inactive_ts_list.

[   60.782534] ------------[ cut here ]------------
[   60.782543] WARNING: CPU: 0 PID: 9430 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0()
[   60.782545] list_del corruption, ffff88045b00d180->next is LIST_POISON1 (dead000000100100)
[   60.782546] Modules linked in: ib_srpt tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc scsi_tgt ib_isert rdma_cm iw_cm ib_addr iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc autofs4 sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ib_ipoib ib_cm ib_uverbs ib_umad mlx4_en mlx4_ib ib_sa ib_mad ib_core mlx4_core dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan vhost tun kvm_intel kvm uinput iTCO_wdt iTCO_vendor_support microcode serio_raw pcspkr sb_edac edac_core sg i2c_i801 lpc_ich mfd_core mtip32xx igb i2c_algo_bit i2c_core ptp pps_core ioatdma dca wmi ext3(F) jbd(F) mbcache(F) sd_mod(F) crc_t10dif(F) crct10dif_common(F) ahci(F) libahci(F) isci(F) libsas(F) scsi_transport_sas(F) [last unloaded: speedstep_lib]
[   60.782597] CPU: 0 PID: 9430 Comm: iscsi_ttx Tainted: GF 3.12.19+ #2
[   60.782598] Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013
[   60.782599]  0000000000000035 ffff88044de31d08 ffffffff81553ae7 0000000000000035
[   60.782602]  ffff88044de31d58 ffff88044de31d48 ffffffff8104d1cc 0000000000000002
[   60.782605]  ffff88045b00d180 ffff88045b00d0c0 ffff88045b00d0c0 ffff88044de31e58
[   60.782607] Call Trace:
[   60.782611]  [] dump_stack+0x49/0x62
[   60.782615]  [] warn_slowpath_common+0x8c/0xc0
[   60.782618]  [] warn_slowpath_fmt+0x46/0x50
[   60.782620]  [] __list_del_entry+0x63/0xd0
[   60.782622]  [] list_del+0x11/0x40
[   60.782630]  [] iscsi_del_ts_from_active_list+0x29/0x50 [iscsi_target_mod]
[   60.782635]  [] iscsi_tx_thread_pre_handler+0xa1/0x180 [iscsi_target_mod]
[   60.782642]  [] iscsi_target_tx_thread+0x4e/0x220 [iscsi_target_mod]
[   60.782647]  [] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[   60.782652]  [] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[   60.782655]  [] kthread+0xce/0xe0
[   60.782657]  [] ? kthread_freezable_should_stop+0x70/0x70
[   60.782660]  [] ret_from_fork+0x7c/0xb0
[   60.782662]  [] ? kthread_freezable_should_stop+0x70/0x70
[   60.782663] ---[ end trace 9662f4a661d33965 ]---

Since this code is no longer used, go ahead and drop the problematic usage
all-together.

Reported-by: Gavin Guo 
Reported-by: Moussa Ba 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman