linux-toradex.git/drivers/target, branch v4.9.52

target: Fix node_acl demo-mode + uncached dynamic shutdown regression

2017-08-16T20:43:17+00:00

commit 6f48655facfd7f7ccfe6d252ac0fe319ab02e4dd upstream.

This patch fixes a generate_node_acls = 1 + cache_dynamic_acls = 0
regression, that was introduced by

  commit 01d4d673558985d9a118e1e05026633c3e2ade9b
  Author: Nicholas Bellinger 
  Date:   Wed Dec 7 12:55:54 2016 -0800

which originally had the proper list_del_init() usage, but was
dropped during list review as it was thought unnecessary by HCH.

However, list_del_init() usage is required during the special
generate_node_acls = 1 + cache_dynamic_acls = 0 case when
transport_free_session() does a list_del(&se_nacl->acl_list),
followed by target_complete_nacl() doing the same thing.

This was manifesting as a general protection fault as reported
by Justin:

kernel: general protection fault: 0000 [#1] SMP
kernel: Modules linked in:
kernel: CPU: 0 PID: 11047 Comm: iscsi_ttx Not tainted 4.13.0-rc2.x86_64.1+ #20
kernel: Hardware name: Intel Corporation S5500BC/S5500BC, BIOS S5500.86B.01.00.0064.050520141428 05/05/2014
kernel: task: ffff88026939e800 task.stack: ffffc90007884000
kernel: RIP: 0010:target_put_nacl+0x49/0xb0
kernel: RSP: 0018:ffffc90007887d70 EFLAGS: 00010246
kernel: RAX: dead000000000200 RBX: ffff8802556ca000 RCX: 0000000000000000
kernel: RDX: dead000000000100 RSI: 0000000000000246 RDI: ffff8802556ce028
kernel: RBP: ffffc90007887d88 R08: 0000000000000001 R09: 0000000000000000
kernel: R10: ffffc90007887df8 R11: ffffea0009986900 R12: ffff8802556ce020
kernel: R13: ffff8802556ce028 R14: ffff8802556ce028 R15: ffffffff88d85540
kernel: FS:  0000000000000000(0000) GS:ffff88027fc00000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00007fffe36f5f94 CR3: 0000000009209000 CR4: 00000000003406f0
kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
kernel: Call Trace:
kernel:  transport_free_session+0x67/0x140
kernel:  transport_deregister_session+0x7a/0xc0
kernel:  iscsit_close_session+0x92/0x210
kernel:  iscsit_close_connection+0x5f9/0x840
kernel:  iscsit_take_action_for_connection_exit+0xfe/0x110
kernel:  iscsi_target_tx_thread+0x140/0x1e0
kernel:  ? wait_woken+0x90/0x90
kernel:  kthread+0x124/0x160
kernel:  ? iscsit_thread_get_cpumask+0x90/0x90
kernel:  ? kthread_create_on_node+0x40/0x40
kernel:  ret_from_fork+0x22/0x30
kernel: Code: 00 48 89 fb 4c 8b a7 48 01 00 00 74 68 4d 8d 6c 24 08 4c
89 ef e8 e8 28 43 00 48 8b 93 20 04 00 00 48 8b 83 28 04 00 00 4c 89
ef <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 20
kernel: RIP: target_put_nacl+0x49/0xb0 RSP: ffffc90007887d70
kernel: ---[ end trace f12821adbfd46fed ]---

To address this, go ahead and use proper list_del_list() for all
cases of se_nacl->acl_list deletion.

Reported-by: Justin Maggard 
Tested-by: Justin Maggard 
Cc: Justin Maggard 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Fix iscsi_np reset hung task during parallel delete

2017-08-16T20:43:16+00:00

commit 978d13d60c34818a41fc35962602bdfa5c03f214 upstream.

This patch fixes a bug associated with iscsit_reset_np_thread()
that can occur during parallel configfs rmdir of a single iscsi_np
used across multiple iscsi-target instances, that would result in
hung task(s) similar to below where configfs rmdir process context
was blocked indefinately waiting for iscsi_np->np_restart_comp
to finish:

[ 6726.112076] INFO: task dcp_proxy_node_:15550 blocked for more than 120 seconds.
[ 6726.119440]       Tainted: G        W  O     4.1.26-3321 #2
[ 6726.125045] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 6726.132927] dcp_proxy_node_ D ffff8803f202bc88     0 15550      1 0x00000000
[ 6726.140058]  ffff8803f202bc88 ffff88085c64d960 ffff88083b3b1ad0 ffff88087fffeb08
[ 6726.147593]  ffff8803f202c000 7fffffffffffffff ffff88083f459c28 ffff88083b3b1ad0
[ 6726.155132]  ffff88035373c100 ffff8803f202bca8 ffffffff8168ced2 ffff8803f202bcb8
[ 6726.162667] Call Trace:
[ 6726.165150]  [] schedule+0x32/0x80
[ 6726.170156]  [] schedule_timeout+0x214/0x290
[ 6726.176030]  [] ? __send_signal+0x52/0x4a0
[ 6726.181728]  [] wait_for_completion+0x96/0x100
[ 6726.187774]  [] ? wake_up_state+0x10/0x10
[ 6726.193395]  [] iscsit_reset_np_thread+0x62/0xe0 [iscsi_target_mod]
[ 6726.201278]  [] iscsit_tpg_disable_portal_group+0x96/0x190 [iscsi_target_mod]
[ 6726.210033]  [] lio_target_tpg_store_enable+0x4f/0xc0 [iscsi_target_mod]
[ 6726.218351]  [] configfs_write_file+0xaa/0x110
[ 6726.224392]  [] vfs_write+0xa4/0x1b0
[ 6726.229576]  [] SyS_write+0x41/0xb0
[ 6726.234659]  [] system_call_fastpath+0x12/0x71

It would happen because each iscsit_reset_np_thread() sets state
to ISCSI_NP_THREAD_RESET, sends SIGINT, and then blocks waiting
for completion on iscsi_np->np_restart_comp.

However, if iscsi_np was active processing a login request and
more than a single iscsit_reset_np_thread() caller to the same
iscsi_np was blocked on iscsi_np->np_restart_comp, iscsi_np
kthread process context in __iscsi_target_login_thread() would
flush pending signals and only perform a single completion of
np->np_restart_comp before going back to sleep within transport
specific iscsit_transport->iscsi_accept_np code.

To address this bug, add a iscsi_np->np_reset_count and update
__iscsi_target_login_thread() to keep completing np->np_restart_comp
until ->np_reset_count has reached zero.

Reported-by: Gary Guo 
Tested-by: Gary Guo 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: fix memory leak in iscsit_setup_text_cmd()

2017-08-16T20:43:16+00:00

commit ea8dc5b4cd2195ee582cae28afa4164c6dea1738 upstream.

On receiving text request iscsi-target allocates buffer for
payload in iscsit_handle_text_cmd() and assigns buffer pointer
to cmd->text_in_ptr, this buffer is currently freed in
iscsit_release_cmd(), if iscsi-target sets 'C' bit in text
response then it will receive another text request from the
initiator with ttt != 0xffffffff in this case iscsi-target
will find cmd using itt and call iscsit_setup_text_cmd()
which will set cmd->text_in_ptr to NULL without freeing
previously allocated buffer.

This patch fixes this issue by calling kfree(cmd->text_in_ptr)
in iscsit_setup_text_cmd() before assigning NULL to it.

For the first text request cmd->text_in_ptr is NULL as
cmd is memset to 0 in iscsit_allocate_cmd().

Signed-off-by: Varun Prakash 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Fix initial login PDU asynchronous socket close OOPs

2017-08-11T15:49:31+00:00

commit 25cdda95fda78d22d44157da15aa7ea34be3c804 upstream.

This patch fixes a OOPs originally introduced by:

   commit bb048357dad6d604520c91586334c9c230366a14
   Author: Nicholas Bellinger 
   Date:   Thu Sep 5 14:54:04 2013 -0700

   iscsi-target: Add sk->sk_state_change to cleanup after TCP failure

which would trigger a NULL pointer dereference when a TCP connection
was closed asynchronously via iscsi_target_sk_state_change(), but only
when the initial PDU processing in iscsi_target_do_login() from iscsi_np
process context was blocked waiting for backend I/O to complete.

To address this issue, this patch makes the following changes.

First, it introduces some common helper functions used for checking
socket closing state, checking login_flags, and atomically checking
socket closing state + setting login_flags.

Second, it introduces a LOGIN_FLAGS_INITIAL_PDU bit to know when a TCP
connection has dropped via iscsi_target_sk_state_change(), but the
initial PDU processing within iscsi_target_do_login() in iscsi_np
context is still running.  For this case, it sets LOGIN_FLAGS_CLOSED,
but doesn't invoke schedule_delayed_work().

The original NULL pointer dereference case reported by MNC is now handled
by iscsi_target_do_login() doing a iscsi_target_sk_check_close() before
transitioning to FFP to determine when the socket has already closed,
or iscsi_target_start_negotiation() if the login needs to exchange
more PDUs (eg: iscsi_target_do_login returned 0) but the socket has
closed.  For both of these cases, the cleanup up of remaining connection
resources will occur in iscsi_target_start_negotiation() from iscsi_np
process context once the failure is detected.

Finally, to handle to case where iscsi_target_sk_state_change() is
called after the initial PDU procesing is complete, it now invokes
conn->login_work -> iscsi_target_do_login_rx() to perform cleanup once
existing iscsi_target_sk_check_close() checks detect connection failure.
For this case, the cleanup of remaining connection resources will occur
in iscsi_target_do_login_rx() from delayed workqueue process context
once the failure is detected.

Reported-by: Mike Christie 
Reviewed-by: Mike Christie 
Tested-by: Mike Christie 
Cc: Mike Christie 
Reported-by: Hannes Reinecke 
Cc: Hannes Reinecke 
Cc: Sagi Grimberg 
Cc: Varun Prakash 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target: Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce

2017-07-27T22:08:06+00:00

commit 1d6ef276594a781686058802996e09c8550fd767 upstream.

This patch addresses a COMPARE_AND_WRITE se_device->caw_sem leak,
that would be triggered during normal se_cmd shutdown or abort
via __transport_wait_for_tasks().

This would occur because target_complete_cmd() would catch this
early and do complete_all(&cmd->t_transport_stop_comp), but since
target_complete_ok_work() or target_complete_failure_work() are
never called to invoke se_cmd->transport_complete_callback(),
the COMPARE_AND_WRITE specific callbacks never release caw_sem.

To address this special case, go ahead and release caw_sem
directly from target_complete_cmd().

(Remove '&& success' from check, to release caw_sem regardless
 of scsi_status - nab)

Signed-off-by: Jiang Yi 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Add login_keys_workaround attribute for non RFC initiators

2017-07-27T22:07:59+00:00

commit 138d351eefb727ab9e41a3dc5f112ceb4f6e59f2 upstream.

This patch re-introduces part of a long standing login workaround that
was recently dropped by:

  commit 1c99de981f30b3e7868b8d20ce5479fa1c0fea46
  Author: Nicholas Bellinger 
  Date:   Sun Apr 2 13:36:44 2017 -0700

      iscsi-target: Drop work-around for legacy GlobalSAN initiator

Namely, the workaround for FirstBurstLength ended up being required by
Mellanox Flexboot PXE boot ROMs as reported by Robert.

So this patch re-adds the work-around for FirstBurstLength within
iscsi_check_proposer_for_optional_reply(), and makes the key optional
to respond when the initiator does not propose, nor respond to it.

Also as requested by Arun, this patch introduces a new TPG attribute
named 'login_keys_workaround' that controls the use of both the
FirstBurstLength workaround, as well as the two other existing
workarounds for gPXE iSCSI boot client.

By default, the workaround is enabled with login_keys_workaround=1,
since Mellanox FlexBoot requires it, and Arun has verified the Qlogic
MSFT initiator already proposes FirstBurstLength, so it's uneffected
by this re-adding this part of the original work-around.

Reported-by: Robert LeBlanc 
Cc: Robert LeBlanc 
Reviewed-by: Arun Easi 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Reject immediate data underflow larger than SCSI transfer length

2017-06-29T11:00:30+00:00

commit abb85a9b512e8ca7ad04a5a8a6db9664fe644974 upstream.

When iscsi WRITE underflow occurs there are two different scenarios
that can happen.

Normally in practice, when an EDTL vs. SCSI CDB TRANSFER LENGTH
underflow is detected, the iscsi immediate data payload is the
smaller SCSI CDB TRANSFER LENGTH.

That is, when a host fabric LLD is using a fixed size EDTL for
a specific control CDB, the SCSI CDB TRANSFER LENGTH and actual
SCSI payload ends up being smaller than EDTL.  In iscsi, this
means the received iscsi immediate data payload matches the
smaller SCSI CDB TRANSFER LENGTH, because there is no more
SCSI payload to accept beyond SCSI CDB TRANSFER LENGTH.

However, it's possible for a malicous host to send a WRITE
underflow where EDTL is larger than SCSI CDB TRANSFER LENGTH,
but incoming iscsi immediate data actually matches EDTL.

In the wild, we've never had a iscsi host environment actually
try to do this.

For this special case, it's wrong to truncate part of the
control CDB payload and continue to process the command during
underflow when immediate data payload received was larger than
SCSI CDB TRANSFER LENGTH, so go ahead and reject and drop the
bogus payload as a defensive action.

Note this potential bug was originally relaxed by the following
for allowing WRITE underflow in MSFT FCP host environments:

   commit c72c5250224d475614a00c1d7e54a67f77cd3410
   Author: Roland Dreier 
   Date:   Wed Jul 22 15:08:18 2015 -0700

      target: allow underflow/overflow for PR OUT etc. commands

Cc: Roland Dreier 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Cc: Martin K. Petersen 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP

2017-06-29T11:00:30+00:00

commit 105fa2f44e504c830697b0c794822112d79808dc upstream.

This patch fixes a BUG() in iscsit_close_session() that could be
triggered when iscsit_logout_post_handler() execution from within
tx thread context was not run for more than SECONDS_FOR_LOGOUT_COMP
(15 seconds), and the TCP connection didn't already close before
then forcing tx thread context to automatically exit.

This would manifest itself during explicit logout as:

[33206.974254] 1 connection(s) still exist for iSCSI session to iqn.1993-08.org.debian:01:3f5523242179
[33206.980184] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 2100.772 msecs
[33209.078643] ------------[ cut here ]------------
[33209.078646] kernel BUG at drivers/target/iscsi/iscsi_target.c:4346!

Normally when explicit logout attempt fails, the tx thread context
exits and iscsit_close_connection() from rx thread context does the
extra cleanup once it detects conn->conn_logout_remove has not been
cleared by the logout type specific post handlers.

To address this special case, if the logout post handler in tx thread
context detects conn->tx_thread_active has already been cleared, simply
return and exit in order for existing iscsit_close_connection()
logic from rx thread context do failed logout cleanup.

Reported-by: Bart Van Assche 
Tested-by: Bart Van Assche 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Cc: Sagi Grimberg 
Tested-by: Gary Guo 
Tested-by: Chu Yuan Lin 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target: Fix kref->refcount underflow in transport_cmd_finish_abort

2017-06-29T11:00:30+00:00

commit 73d4e580ccc5c3e05cea002f18111f66c9c07034 upstream.

This patch fixes a se_cmd->cmd_kref underflow during CMD_T_ABORTED
when a fabric driver drops it's second reference from below the
target_core_tmr.c based callers of transport_cmd_finish_abort().

Recently with the conversion of kref to refcount_t, this bug was
manifesting itself as:

[705519.601034] refcount_t: underflow; use-after-free.
[705519.604034] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 20116.512 msecs
[705539.719111] ------------[ cut here ]------------
[705539.719117] WARNING: CPU: 3 PID: 26510 at lib/refcount.c:184 refcount_sub_and_test+0x33/0x51

Since the original kref atomic_t based kref_put() didn't check for
underflow and only invoked the final callback when zero was reached,
this bug did not manifest in practice since all se_cmd memory is
using preallocated tags.

To address this, go ahead and propigate the existing return from
transport_put_cmd() up via transport_cmd_finish_abort(), and
change transport_cmd_finish_abort() + core_tmr_handle_tas_abort()
callers to only do their local target_put_sess_cmd() if necessary.

Reported-by: Bart Van Assche 
Tested-by: Bart Van Assche 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Cc: Christoph Hellwig 
Cc: Himanshu Madhani 
Cc: Sagi Grimberg 
Tested-by: Gary Guo 
Tested-by: Chu Yuan Lin 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target: Re-add check to reject control WRITEs with overflow data

2017-06-14T13:06:00+00:00

commit 4ff83daa0200affe1894bd33d17bac404e3d78d4 upstream.

During v4.3 when the overflow/underflow check was relaxed by
commit c72c525022:

  commit c72c5250224d475614a00c1d7e54a67f77cd3410
  Author: Roland Dreier 
  Date:   Wed Jul 22 15:08:18 2015 -0700

       target: allow underflow/overflow for PR OUT etc. commands

to allow underflow/overflow for Windows compliance + FCP, a
consequence was to allow control CDBs to process overflow
data for iscsi-target with immediate data as well.

As per Roland's original change, continue to allow underflow
cases for control CDBs to make Windows compliance + FCP happy,
but until overflow for control CDBs is supported tree-wide,
explicitly reject all control WRITEs with overflow following
pre v4.3.y logic.

Reported-by: Bart Van Assche 
Cc: Roland Dreier 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman