linux-toradex.git/drivers/target, branch v5.14-rc2

Merge tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block

2021-07-09T19:05:33+00:00

Pull more block updates from Jens Axboe:
 "A combination of changes that ended up depending on both the driver
  and core branch (and/or the IDE removal), and a few late arriving
  fixes. In detail:

   - Fix io ticks wrap-around issue (Chunguang)

   - nvme-tcp sock locking fix (Maurizio)

   - s390-dasd fixes (Kees, Christoph)

   - blk_execute_rq polling support (Keith)

   - blk-cgroup RCU iteration fix (Yu)

   - nbd backend ID addition (Prasanna)

   - Partition deletion fix (Yufen)

   - Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph)

   - Removal of now dead block request types due to IDE removal
     (Christoph)

   - Loop probing and control device cleanups (Christoph)

   - Device uevent fix (Christoph)

   - Misc cleanups/fixes (Tetsuo, Christoph)"

* tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits)
  blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs
  block: fix the problem of io_ticks becoming smaller
  nvme-tcp: can't set sk_user_data without write_lock
  loop: remove unused variable in loop_set_status()
  block: remove the bdgrab in blk_drop_partitions
  block: grab a device refcount in disk_uevent
  s390/dasd: Avoid field over-reading memcpy()
  dasd: unexport dasd_set_target_state
  block: check disk exist before trying to add partition
  ubd: remove dead code in ubd_setup_common
  nvme: use return value from blk_execute_rq()
  block: return errors from blk_execute_rq()
  nvme: use blk_execute_rq() for passthrough commands
  block: support polling through blk_execute_rq
  block: remove REQ_OP_SCSI_{IN,OUT}
  block: mark blk_mq_init_queue_data static
  loop: rewrite loop_exit using idr_for_each_entry
  loop: split loop_lookup
  loop: don't allow deleting an unspecified loop device
  loop: move loop_ctl_mutex locking into loop_add
  ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2021-07-02T22:14:36+00:00

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, ibmvfc,
  megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
  elx and mpi3mr being new drivers.

  The major core change is a rework to drop the status byte handling
  macros and the old bit shifted definitions and the rest of the updates
  are minor fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
  scsi: aha1740: Avoid over-read of sense buffer
  scsi: arcmsr: Avoid over-read of sense buffer
  scsi: ips: Avoid over-read of sense buffer
  scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
  scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
  scsi: elx: libefc: Fix less than zero comparison of a unsigned int
  scsi: elx: efct: Fix pointer error checking in debugfs init
  scsi: elx: efct: Fix is_originator return code type
  scsi: elx: efct: Fix link error for _bad_cmpxchg
  scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
  scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
  scsi: elx: efct: Fix error handling in efct_hw_init()
  scsi: elx: efct: Remove redundant initialization of variable lun
  scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
  scsi: lpfc: Fix build error in lpfc_scsi.c
  scsi: target: iscsi: Remove redundant continue statement
  scsi: qla4xxx: Remove redundant continue statement
  scsi: ppa: Switch to use module_parport_driver()
  scsi: imm: Switch to use module_parport_driver()
  scsi: mpt3sas: Fix error return value in _scsih_expander_add()
  ...

block: remove REQ_OP_SCSI_{IN,OUT}

2021-06-30T21:34:19+00:00

With the legacy IDE driver gone drivers now use either REQ_OP_DRV_*
or REQ_OP_SCSI_*, so unify the two concepts of passthrough requests
into a single one.

Reviewed-by: Chaitanya Kulkarni 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

scsi: target: iscsi: Remove redundant continue statement

2021-06-19T03:01:03+00:00

The continue statement at the end of a loop has no effect, remove it.

Link: https://lore.kernel.org/r/20210617114347.10247-1-colin.king@canonical.com
Signed-off-by: Colin Ian King 
Signed-off-by: Martin K. Petersen 
Addresses-Coverity: ("Continue has no effect")

scsi: core: Introduce enums for the SAM and host status codes

2021-06-03T03:09:39+00:00

Make it possible for the compiler to verify whether SAM and host
status codes are used correctly.

[mkp: resolve conflicts with Hannes' SCSI result series]

Link: https://lore.kernel.org/r/20210524025457.11299-3-bvanassche@acm.org
Cc: Hannes Reinecke 
Reviewed-by: John Garry 
Reviewed-by: Himanshu Madhani 
Signed-off-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen

scsi: target: core: Fix warning on realtime kernels

2021-06-01T02:59:13+00:00

On realtime kernels, spin_lock_irq*(spinlock_t) do not disable the
interrupts, a call to irqs_disabled() will return false thus firing a
warning in __transport_wait_for_tasks().

Remove the warning and also replace assert_spin_locked() with
lockdep_assert_held()

Link: https://lore.kernel.org/r/20210531121326.3649-1-mlombard@redhat.com
Reviewed-by: Bart Van Assche 
Signed-off-by: Maurizio Lombardi 
Signed-off-by: Martin K. Petersen

scsi: target: Use standard SAM status types

2021-06-01T02:48:24+00:00

target_complete_cmd() and friends requires a SAM status type, so passing
GOOD here is actually wrong.

Link: https://lore.kernel.org/r/20210427083046.31620-40-hare@suse.de
Reviewed-by: Bart Van Assche 
Signed-off-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen

scsi: core: Kill DRIVER_SENSE

2021-06-01T02:48:21+00:00

Replace the check for DRIVER_SENSE with a check for
scsi_status_is_check_condition().

Audit all callsites to ensure the SAM status is set correctly. For
backwards compability move the DRIVER_SENSE definition to sg.h, and update
sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever
SAM_STAT_CHECK_CONDITION is present.

[mkp: fix zeroday srp warning]

Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.de
Signed-off-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen 

fix

scsi: target: tcmu: Fix boolreturn.cocci warnings

2021-05-21T21:14:21+00:00

drivers/target/target_core_user.c:1424:9-10: WARNING: return of 0/1 in function 'tcmu_handle_completions' with return type bool

 Return statements in functions returning bool should use
 true/false instead of 1/0.

Generated by: scripts/coccinelle/misc/boolreturn.cocci

Link: https://lore.kernel.org/r/20210515230358.GA97544@60d1edce16e0
Fixes: 9814b55cde05 ("scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found")
CC: Bodo Stroesser 
Reported-by: kernel test robot 
Acked-by: Bodo Stroesser 
Signed-off-by: kernel test robot 
Signed-off-by: Martin K. Petersen

scsi: target: iblock: Fix smp_processor_id() BUG messages

2021-05-21T20:40:00+00:00

This has us use raw_smp_processor_id() in iblock's plug_device callout.
smp_processor_id() is not needed here, because we are running from a per
CPU work item that is also queued to run on a worker thread that is
normally bound to a specific CPU. If the worker thread did end up switching
CPUs then it's handled the same way we handle when the work got moved to a
different CPU's worker thread, where we will just end up sending I/O from
the new CPU.

Link: https://lore.kernel.org/r/20210519222640.5153-1-michael.christie@oracle.com
Fixes: 415ccd9811da ("scsi: target: iblock: Add backend plug/unplug callouts")
Signed-off-by: Mike Christie 
Signed-off-by: Martin K. Petersen