linux-toradex.git/drivers/thermal/qcom-spmi-temp-alarm.c, branch v4.19 Linux kernel for Apalis and Colibri modules thermal: qcom-spmi-temp-alarm: add support for GEN2 PMIC peripherals 2018-06-01T21:22:28+00:00 David Collins collinsd@codeaurora.org 2018-05-24T07:19:02+00:00 10c8251cce3380823c755a63f97cca432fcc4aec Add support for the TEMP_ALARM GEN2 PMIC peripheral subtype. The GEN2 subtype defines an over temperature state with hysteresis instead of stage in the status register. There are two GEN2 states corresponding to stages 1 and 2. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> 
Add support for the TEMP_ALARM GEN2 PMIC peripheral subtype.  The
GEN2 subtype defines an over temperature state with hysteresis
instead of stage in the status register.  There are two GEN2
states corresponding to stages 1 and 2.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
thermal/drivers/qcom-spmi: Use devm_iio_channel_get 2017-11-01T02:32:17+00:00 Daniel Lezcano daniel.lezcano@linaro.org 2017-10-19T17:06:00+00:00 7a4ca51b704038d1d7f5e31177a7fa4d9dcb839e The iio_channel_get() function has now its devm_ version. Use it and remove all the rollback code for iio_channel_release() as well as the .remove ops. [Compiled tested only] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> 
The iio_channel_get() function has now its devm_ version.

Use it and remove all the rollback code for iio_channel_release() as well
as the .remove ops.

[Compiled tested only]

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
thermal: qcom-spmi: Treat reg property as a single cell 2016-11-23T02:07:35+00:00 Stephen Boyd sboyd@codeaurora.org 2016-10-18T23:40:19+00:00 cd323b2b5aba0d9920b116866efc7ebfd2d2052c We only read the first element of the reg property to figure out the offset of the temperature sensor inside the PMIC. Furthermore, we want to remove the second element in DT, so just don't read the second element so that probe keeps working if we change the DT in the future. Cc: Ivan T. Ivanov <iivanov.xz@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> 
We only read the first element of the reg property to figure out
the offset of the temperature sensor inside the PMIC.
Furthermore, we want to remove the second element in DT, so just
don't read the second element so that probe keeps working if we
change the DT in the future.

Cc: Ivan T. Ivanov <iivanov.xz@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
thermal: Enhance thermal_zone_device_update for events 2016-09-27T06:35:21+00:00 Srinivas Pandruvada srinivas.pandruvada@linux.intel.com 2016-08-26T23:21:16+00:00 0e70f466fb910ae54c4c71243b99385129e93feb Added one additional parameter to thermal_zone_device_update() to provide caller with an optional capability to specify reason. Currently this event is used by user space governor to trigger different processing based on event code. Also it saves an additional call to read temperature when the event is received. The following events are cuurently defined: - Unspecified event - New temperature sample - Trip point violated - Trip point changed - thermal device up and down - thermal device power capability changed Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> 
Added one additional parameter to thermal_zone_device_update() to provide
caller with an optional capability to specify reason.
Currently this event is used by user space governor to trigger different
processing based on event code. Also it saves an additional call to read
temperature when the event is received.
The following events are cuurently defined:
- Unspecified event
- New temperature sample
- Trip point violated
- Trip point changed
- thermal device up and down
- thermal device power capability changed

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
thermal: convert qcom-spmi to use devm_thermal_zone_of_sensor_register 2016-05-17T14:28:26+00:00 Eduardo Valentin edubezval@gmail.com 2016-03-09T21:08:48+00:00 e936491e5c005620951fe5d67e441b936f583702 This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> 
This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
thermal: consistently use int for temperatures 2015-08-03T15:15:50+00:00 Sascha Hauer s.hauer@pengutronix.de 2015-07-24T06:12:54+00:00 17e8351a77397e8a83727eb17e3a3e9b8ab5257a The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com> 
The thermal code uses int, long and unsigned long for temperatures
in different places.

Using an unsigned type limits the thermal framework to positive
temperatures without need. Also several drivers currently will report
temperatures near UINT_MAX for temperatures below 0°C. This will probably
immediately shut the machine down due to overtemperature if started below
0°C.

'long' is 64bit on several architectures. This is not needed since INT_MAX °mC
is above the melting point of all known materials.

Consistently use a plain 'int' for temperatures throughout the thermal code and
the drivers. This only changes the places in the drivers where the temperature
is passed around as pointer, when drivers internally use another type this is
not changed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Peter Feuerer <peter@piie.net>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Peter Feuerer <peter@piie.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-acpi@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: lm-sensors@lm-sensors.org
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
thermal: Add QPNP PMIC temperature alarm driver 2015-05-05T04:27:51+00:00 Ivan T. Ivanov iivanov@mm-sol.com 2015-02-05T17:12:56+00:00 c610afaa21d3c6e7b02040c8563ffc01c7fc0570 Add support for the temperature alarm peripheral found inside Qualcomm plug-and-play (QPNP) PMIC chips. The temperature alarm peripheral outputs a pulse on an interrupt line whenever the thermal over temperature stage value changes. Register a thermal sensor. The temperature reported by this thermal sensor device should reflect the actual PMIC die temperature if an ADC is present on the given PMIC. If no ADC is present, then the reported temperature should be estimated from the over temperature stage value. Cc: David Collins <collinsd@codeaurora.org> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> 
Add support for the temperature alarm peripheral found inside
Qualcomm plug-and-play (QPNP) PMIC chips. The temperature alarm
peripheral outputs a pulse on an interrupt line whenever the
thermal over temperature stage value changes.

Register a thermal sensor. The temperature reported by this thermal
sensor device should reflect the actual PMIC die temperature if an
ADC is present on the given PMIC. If no ADC is present, then the
reported temperature should be estimated from the over temperature
stage value.

Cc: David Collins <collinsd@codeaurora.org>
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>