linux-toradex.git/drivers/thermal/qcom, branch v5.14

thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data()

2021-05-27T09:38:34+00:00

Return -EINVAL when args is invalid instead of 'ret' which is set to
zero by a previous successful call to a function.

Fixes: ca66dca5eda6 ("thermal: qcom: add support for adc-tm5 PMIC thermal monitor")
Reported-by: Hulk Robot 
Signed-off-by: Yang Yingliang 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20210527092640.2070555-1-yangyingliang@huawei.com

thermal/drivers/tsens: Add support for ipq8064-tsens

2021-04-22T12:10:17+00:00

Add support for tsens present in ipq806x SoCs based on generic msm8960
tsens driver.

Signed-off-by: Ansuel Smith 
Reviewed-by: Thara Gopinath 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20210420183343.2272-9-ansuelsmth@gmail.com

thermal/drivers/tsens: Drop unused define for msm8960

2021-04-22T12:10:08+00:00

Drop unused define for msm8960 replaced by generic api and reg_field.

Signed-off-by: Ansuel Smith 
Reviewed-by: Thara Gopinath 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20210420183343.2272-8-ansuelsmth@gmail.com

thermal/drivers/tsens: Replace custom 8960 apis with generic apis

2021-04-22T12:09:59+00:00

Rework calibrate function to use common function. Derive the offset from
a missing hardcoded slope table and the data from the nvmem calib
efuses.
Drop custom get_temp function and use generic api.

Signed-off-by: Ansuel Smith 
Acked-by: Thara Gopinath 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20210420183343.2272-7-ansuelsmth@gmail.com

thermal/drivers/tsens: Fix bug in sensor enable for msm8960

2021-04-22T12:09:32+00:00

Device based on tsens VER_0 contains a hardware bug that results in some
problem with sensor enablement. Sensor id 6-11 can't be enabled
selectively and all of them must be enabled in one step.

Signed-off-by: Ansuel Smith 
Acked-by: Thara Gopinath 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20210420183343.2272-6-ansuelsmth@gmail.com

thermal/drivers/tsens: Use init_common for msm8960

2021-04-22T12:09:23+00:00

Use init_common and drop custom init for msm8960.

Signed-off-by: Ansuel Smith 
Reviewed-by: Thara Gopinath 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20210420183343.2272-5-ansuelsmth@gmail.com

thermal/drivers/tsens: Add VER_0 tsens version

2021-04-22T12:09:14+00:00

VER_0 is used to describe device based on tsens version before v0.1.
These device are devices based on msm8960 for example apq8064 or
ipq806x. Add support for VER_0 in tsens.c and set the right tsens feat
in tsens-8960.c file.

Signed-off-by: Ansuel Smith 
Reviewed-by: Thara Gopinath 
Reported-by: kernel test robot 
Reported-by: Dan Carpenter 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20210420183343.2272-4-ansuelsmth@gmail.com

thermal/drivers/tsens: Convert msm8960 to reg_field

2021-04-22T12:09:05+00:00

Convert msm9860 driver to reg_field to use the init_common
function.

Signed-off-by: Ansuel Smith 
Acked-by: Thara Gopinath 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20210420183343.2272-3-ansuelsmth@gmail.com

thermal/drivers/tsens: Don't hardcode sensor slope

2021-04-22T12:08:50+00:00

Function compute_intercept_slope hardcode the sensor slope to
SLOPE_DEFAULT. Change this and use the default value only if a slope is
not defined. This is needed for tsens VER_0 that has a hardcoded slope
table.

Signed-off-by: Ansuel Smith 
Reviewed-by: Thara Gopinath 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20210420183343.2272-2-ansuelsmth@gmail.com

thermal/drivers/qcom/tsens-v0_1: Add support for MDM9607

2021-04-20T06:58:42+00:00

MDM9607 TSENS IP is very similar to the one of MSM8916, with
minor adjustments to various tuning values.

Signed-off-by: Konrad Dybcio 
Acked-by: Thara Gopinath 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20210319220802.198215-2-konrad.dybcio@somainline.org