linux-toradex.git/drivers/thermal/samsung, branch v3.14.2

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

2014-01-25T01:13:49+00:00

Pull thermal management updates from Zhang Rui:
 "This time, the biggest change is the work of representing hardware
  thermal properties in device tree infrastructure.

  This work includes the introduction of a device tree bindings for
  describing the hardware thermal behavior and limits, and also a parser
  to read and interpret the data, and build thermal zones and thermal
  binding parameters.  It also contains three examples on how to use the
  new representation on sensor devices, using three different drivers to
  accomplish it.  One driver is in thermal subsystem, the TI SoC
  thermal, and the other two drivers are in hwmon subsystem.

  Actually, this would be the first step of the complete work because we
  still need to check other potential drivers to be converted and then
  validate the proposed API.  But the reason why I include it in this
  pull request is that, first, this change does not hurt any others
  without using this approach, second, the principle and concept of this
  change would not break after converting the remaining drivers.  BTW,
  as you can see, there are several points in this change that do not
  belong to thermal subsystem.  Because it has been suggested by Guenter
  R that in such cases, it is recommended to send the complete series
  via one single subsystem.

  Specifics:

   - representing hardware thermal properties in device tree
     infrastructure

   - fix a regression that the imx thermal driver breaks system suspend.

   - introduce ACPI INT3403 thermal driver to retrieve temperature data
     from the INT3403 ACPI device object present on some systems.

   - introduce debug statement for thermal core and step_wise governor.

   - assorted fixes and cleanups for thermal core, cpu cooling, exynos
     thrmal, intel powerclamp and imx thermal driver"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (34 commits)
  thermal: remove const flag from .ops of imx thermal
  Thermal: update thermal zone device after setting emul_temp
  intel_powerclamp: Fix cstate counter detection.
  thermal: imx: add necessary clk operation
  Thermal cpu cooling: return error if no valid cpu frequency entry
  thermal: fix cpu_cooling max_level behavior
  thermal: rcar-thermal: Enable driver compilation with COMPILE_TEST
  thermal: debug: add debug statement for core and step_wise
  thermal: imx_thermal: add module device table
  drivers: thermal: Mark function as static in x86_pkg_temp_thermal.c
  thermal:samsung: fix compilation warning
  thermal: imx: correct suspend/resume flow
  thermal: exynos: fix error return code
  Thermal: ACPI INT3403 thermal driver
  MAINTAINERS: add thermal bindings entry in thermal domain
  arm: dts: make OMAP4460 bandgap node to belong to OCP
  arm: dts: make OMAP443x bandgap node to belong to OCP
  arm: dts: add cooling properties on omap5 cpu node
  arm: dts: add omap5 thermal data
  arm: dts: add omap5 CORE thermal data
  ...

thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)

2014-01-17T01:00:45+00:00

This patch provides auto disable/enable operation for boost. It uses already
present thermal infrastructure to provide BOOST hysteresis.
The TMU data is modified to work properly with or without BOOST.
Hence, the two first trip points with corresponding clip frequencies are
adjusted.

The first one is reduced from 85 to 70 degrees and the clip frequency is
increased to 1.4 GHz from 800 MHz. This trip point is in fact responsible
for providing BOOST hysteresis. When temperature exceeds 70 deg, the maximal
non BOOST frequency for Exynos4412 is imposed.

Since the first trigger level has been "stolen" for BOOST, the second one
needs to be a compromise for the previously used two for non BOOST
configuration. The 95 deg with modified clip freq (to 400 MHz) should provide
a good balance between cooling down the overheated device and throughput on
an acceptable level.

Two last trigger levels are not modified since, they cause platform shutdown
on emergency overheat to happen.

The third trip point passage results in SW managed shut down of the system.
If the last trip point is crossed, the PMU HW generates the power off
signal.

Signed-off-by: Lukasz Majewski 
Signed-off-by: Myungjoo Ham 
Acked-by: Eduardo Valentin 
Reviewed-by: Zhang Rui 
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki

thermal:samsung: fix compilation warning

2014-01-02T02:05:04+00:00

This patch fixes a compilation warning.

warning: passing argument 5 of 'thermal_zone_device_register' discards 'const'
qualifier from pointer target type [enabled by default]
include/linux/thermal.h:270:29: note: expected 'struct thermal_zone_device_ops *'
but argument is of type 'const struct thermal_zone_device_ops *'

Signed-off-by: Naveen Krishna Chatradhi 
Signed-off-by: Zhang Rui

thermal: exynos: fix error return code

2014-01-02T01:54:45+00:00

Set the return variable to an error code as done elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// 
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// 

Signed-off-by: Julia Lawall 
Reviewed-by: Jingoo Han 
Signed-off-by: Zhang Rui

thermal: exynos: Provide initial setting for TMU's test MUX address at Exynos4412

2013-10-15T14:10:42+00:00

The commit d0a0ce3e77c795258d47f9163e92d5031d0c5221 ("thermal: exynos: Add
missing definations and code cleanup") has removed setting of test MUX address
value at TMU configuration setting.

This field is not present on Exynos4210 and Exynos5 SoCs. However on Exynos4412
SoC it is required to set this field after reset because without it TMU shows
maximal available temperature, which causes immediate platform shutdown.

Signed-off-by: Lukasz Majewski 
Reviewed-by: Bartlomiej Zolnierkiewicz 
Reviewed-by: Tomasz Figa 
Signed-off-by: Eduardo Valentin

thermal: exynos: Provide separate TMU data for Exynos4412

2013-10-15T14:10:42+00:00

Up till now Exynos5250 and Exynos4412 had the same definitions for TMU
data. Following commit changes that, by introducing separate
exynos4412_default_tmu_data structure.

Since Exynos4412 was chronologically first, the corresponding name for
TMU registers and default data was renamed.

Additionally, new SOC_ARCH_EXYNOS4412 type has been defined.

Moreover, the SOC_ARCH_EXYNOS name has been changed to SOC_ARCH_EXYNOS5250.

Signed-off-by: Lukasz Majewski 
Reviewed-by: Bartlomiej Zolnierkiewicz 
Reviewed-by: Tomasz Figa 
Signed-off-by: Eduardo Valentin

thermal: exynos: Remove check for thermal device pointer at exynos_report_trigger()

2013-10-15T14:10:42+00:00

The commit 4de0bdaa9677d11406c9becb70c60887c957e1f0
("thermal: exynos: Add support for instance based register/unregister")
broke check for presence of therm_dev at global thermal zone in
exynos_report_trigger().

The resulting wrong test prevents thermal_zone_device_update() call, which
calls handlers for situation when trip points are passed.
Such behavior prevents thermal driver from proper reaction (when TMU interrupt
is raised) in a situation when overheating is detected at TMU hardware.

It turns out, that after exynos thermal subsystem redesign (at v3.12) this
check is not needed, since it is not possible to register thermal zone
without valid thermal device.

Signed-off-by: Lukasz Majewski 
Reviewed-by: Bartlomiej Zolnierkiewicz 
Reviewed-by: Tomasz Figa 
Signed-off-by: Eduardo Valentin

thermal: exynos: Clean up non-DT remnants

2013-08-29T13:37:31+00:00

Commit 1cd1ecb6 ("thermal: exynos: Remove non DT based support")
cleaned up some non-DT code. However, there were few more things
needed for complete cleanup to make this driver DT only.

Signed-off-by: Sachin Kamat 
Signed-off-by: Eduardo Valentin

thermal: exynos: Fix potential NULL pointer dereference

2013-08-29T13:37:28+00:00

NULL pointer was being dereferenced in its own error message.
Changed it to the correct device pointer.

Signed-off-by: Sachin Kamat 
Signed-off-by: Eduardo Valentin

thermal: exynos: Fix typos in Kconfig

2013-08-29T13:37:26+00:00

Fixes some trivial typos.

Signed-off-by: Sachin Kamat 
Signed-off-by: Eduardo Valentin