Pull thermal management updates from Zhang Rui:

 - fix a race condition issue in power allocator governor (Yi Zeng).

 - add support for AP806 and CP110 in armada thermal driver, together
   with several improvements (Baruch Siach, Miquel Raynal)

 - add support for r8z7743 in rcar thermal driver (Biju Das)

 - convert thermal core to use new hwmon API to avoid warning (Fabio
   Estevam)

 - small fixes and cleanups in thermal core and x86_pkg_thermal,
   int3400_thermal, hisi_thermal, mtk_thermal and imx_thermal drivers
   (Pravin Shedge, Geert Uytterhoeven, Alexey Khoroshilov, Brian Bian,
   Matthias Brugger, Nicolin Chen, Uwe Kleine-König)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits)
  thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()
  thermal/x86 pkg temp: Remove debugfs_create_u32() casts
  thermal: int3400_thermal: fix error handling in int3400_thermal_probe()
  thermal/drivers/hisi: Remove bogus const from function return type
  thermal: armada: Give meaningful names to the thermal zones
  thermal: armada: Wait sensors validity before exiting the init callback
  thermal: armada: Change sensors trim default value
  thermal: armada: Update Kconfig and module description
  thermal: armada: Add support for Armada CP110
  thermal: armada: Add support for Armada AP806
  thermal: armada: Use real status register name
  thermal: armada: Clarify control registers accesses
  thermal: armada: Simplify the check of the validity bit
  thermal: armada: Use msleep for long delays
  dt-bindings: thermal: Describe Armada AP806 and CP110
  dt-bindings: thermal: rcar: Add device tree support for r8a7743
  thermal: mtk: Cleanup unused defines
  thermal: imx: update to new formula according to NXP AN5215
  thermal: imx: use consistent style to write temperatures
  thermal: imx: improve comments describing algorithm for temp calculation
  ...

Pull driver core updates from Greg KH:
 "Here is the set of "big" driver core patches for 4.16-rc1.

  The majority of the work here is in the firmware subsystem, with
  reworks to try to attempt to make the code easier to handle in the
  long run, but no functional change. There's also some tree-wide sysfs
  attribute fixups with lots of acks from the various subsystem
  maintainers, as well as a handful of other normal fixes and changes.

  And finally, some license cleanups for the driver core and sysfs code.

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
  device property: Define type of PROPERTY_ENRTY_*() macros
  device property: Reuse property_entry_free_data()
  device property: Move property_entry_free_data() upper
  firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
  firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
  USB: serial: keyspan: Drop firmware Kconfig options
  sysfs: remove DEBUG defines
  sysfs: use SPDX identifiers
  drivers: base: add coredump driver ops
  sysfs: add attribute specification for /sysfs/devices/.../coredump
  test_firmware: fix missing unlock on error in config_num_requests_store()
  test_firmware: make local symbol test_fw_config static
  sysfs: turn WARN() into pr_warn()
  firmware: Fix a typo in fallback-mechanisms.rst
  treewide: Use DEVICE_ATTR_WO
  treewide: Use DEVICE_ATTR_RO
  treewide: Use DEVICE_ATTR_RW
  sysfs.h: Use octal permissions
  component: add debugfs support
  bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
  ...

Booting Linux on a mx6q based board leads to the following warning:

(NULL device *): hwmon_device_register() is deprecated. Please convert the
driver to use hwmon_device_register_with_info().

, so do the conversion as suggested.

Also, this results in the core taking care of creating the 'name'
attribute, so drop the code doing that from the thermal driver.

The initial attempt to convert this driver to
hwmon_device_register_with_info() caused issues on the N900 platform
in commit 7611fb68062f ("thermal: thermal_hwmon: Convert to
hwmon_device_register_with_info()"):

bq27xxx-battery 2-0055: failed to register battery
bq27xxx-battery: probe of 2-0055 failed with error -22
...
rx51-battery: probe of n900-battery failed with error -22

, leading to a revert in commit 3feb479cea37 ("Revert "thermal:
thermal_hwmon: Convert to hwmon_device_register_with_info()"").

The probe errors happened due to the '-' character being present in
the name of the power supply devices: bq27200-0 and rx51-battery.

Since commit 74d3b6419772 ("hwmon: Relax name attribute validation
for new APIs") hwmon will no longer treat these names as errors,
allowing the transition for hwmon_device_register_with_info() to
happen in a safely manner.

Cc: Pavel Machek <pavel@ucw.cz>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

When exposing data access through debugfs, the correct
debugfs_create_*() functions must be used, depending on data type.

Remove all casts from data pointers passed to debugfs_create_*()
functions, as such casts prevent the compiler from flagging bugs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

There are resources that are not dealocated on failure path
in int3400_thermal_probe().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Convert DEVICE_ATTR uses to DEVICE_ATTR_WO where possible.

Done with perl script:

$ git grep -w --name-only DEVICE_ATTR | \
  xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IWUSR\s*|\s*0200\s*)\)?\s*,\s*NULL\s*,\s*\s_store\s*\)/DEVICE_ATTR_WO(\1)/g; print;}'

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert DEVICE_ATTR uses to DEVICE_ATTR_RO where possible.

Done with perl script:

$ git grep -w --name-only DEVICE_ATTR | \
  xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IRUGO\s*|\s*0444\s*)\)?\s*,\s*\1_show\s*,\s*NULL\s*\)/DEVICE_ATTR_RO(\1)/g; print;}'

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert DEVICE_ATTR uses to DEVICE_ATTR_RW where possible.

Done with perl script:

$ git grep -w --name-only DEVICE_ATTR | \
  xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(\s*S_IRUGO\s*\|\s*S_IWUSR|\s*S_IWUSR\s*\|\s*S_IRUGO\s*|\s*0644\s*)\)?\s*,\s*\1_show\s*,\s*\1_store\s*\)/DEVICE_ATTR_RW(\1)/g; print;}'

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With gcc-4.1.2:

    drivers/thermal/hisi_thermal.c: In function ‘hisi_thermal_probe’:
    drivers/thermal/hisi_thermal.c:530: warning: type qualifiers ignored on function return type

Remove the "const" keyword to fix this.

Fixes: a160a465297362c5 ("thermal/drivers/hisi: Prepare to add support for other hisi platforms")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>