Pull thermal fixes from Eduardo Valentin:
 "Minor fixes to OF thermal, qoriq, and rcar drivers"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: of-thermal: disable passive polling when thermal zone is disabled
  thermal: rcar_gen3_thermal: convert to SPDX identifiers
  thermal: rcar_thermal: convert to SPDX identifiers
  thermal: qoriq: Switch to SPDX identifier
  thermal: qoriq: Simplify the 'site' variable assignment
  thermal: qoriq: Use devm_thermal_zone_of_sensor_register()

Pull thermal management updates from Zhang Rui:

 - Add Daniel Lezcano as the reviewer of thermal framework and SoC
   driver changes (Daniel Lezcano).

 - Fix a bug in intel_dts_soc_thermal driver, which does not translate
   IO-APIC GSI (Global System Interrupt) into Linux irq number (Hans de
   Goede).

 - For device tree bindings, allow cooling devices sharing same trip
   point with same contribution value to share cooling map (Viresh
   Kumar).

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  dt-bindings: thermal: Allow multiple devices to share cooling map
  MAINTAINERS: Add Daniel Lezcano as designated reviewer for thermal
  Thermal: Intel SoC DTS: Translate IO-APIC GSI number to linux irq number

Also add these typos to spelling.txt so checkpatch.pl will look for them.

Link: http://lkml.kernel.org/r/88af06b9de34d870cb0afc46cfd24e0458be2575.1529471371.git.fthain@telegraphics.com.au
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When thermal zone is in passive mode, disabling its mode from
sysfs is NOT taking effect at all, it is still polling the
temperature of the disabled thermal zone and handling all thermal
trips, it makes user confused. The disabling operation should
disable the thermal zone behavior completely, for both active and
passive mode, this patch clears the passive_delay when thermal
zone is disabled and restores it when it is enabled.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

As original license mentioned, it is GPL-2.0 in SPDX.
Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL".
See ${LINUX}/include/linux/module.h

	"GPL"           [GNU Public License v2 or later]
	"GPL v2"        [GNU Public License v2]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

There is no need to assign zero to the variable 'site' and then
perform a compound bitwise OR operation afterwards.

Make it simpler by assigning the final 'site' value directly.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

By using the managed devm_thermal_zone_of_sensor_register() we can
drop the explicit call to thermal_zone_of_sensor_unregister() in the
qoriq_tmu_remove() function, which simplifies the code a bit.

So switch to devm_thermal_zone_of_sensor_register().

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Pull thermal management updates from Eduardo Valentin:

 - rework tsens driver to add support for tsens-v2 (Amit Kucheria)

 - rework armada thermal driver to use syscon and multichannel support
   (Miquel Raynal)

 - fixes to TI SoC, IMX, Exynos, RCar, and hwmon drivers

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (34 commits)
  thermal: armada: fix copy-paste error in armada_thermal_probe()
  thermal: rcar_thermal: avoid NULL dereference in absence of IRQ resources
  thermal: samsung: Remove Exynos5440 clock handling left-overs
  thermal: tsens: Fix negative temperature reporting
  thermal: tsens: switch from of_iomap() to devm_ioremap_resource()
  thermal: tsens: Rename variable
  thermal: tsens: Add generic support for TSENS v2 IP
  thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse
  thermal: tsens: Add support to split up register address space into two
  dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP
  thermal: tsens: Get rid of unused fields in structure
  thermal_hwmon: Pass the originating device down to hwmon_device_register_with_info
  thermal_hwmon: Sanitize attribute name passed to hwmon
  dt-bindings: thermal: armada: add reference to new bindings
  dt-bindings: cp110: add the thermal node in the syscon file
  dt-bindings: cp110: update documentation since DT de-duplication
  dt-bindings: ap806: add the thermal node in the syscon file
  dt-bindings: cp110: prepare the syscon file to list other syscons nodes
  dt-bindings: ap806: prepare the syscon file to list other syscons nodes
  dt-bindings: cp110: rename cp110 syscon file
  ...