linux-toradex.git/drivers/thermal, branch v4.9.16

thermal: hwmon: Properly report critical temperature in sysfs

2017-01-09T07:32:18+00:00

commit f37fabb8643eaf8e3b613333a72f683770c85eca upstream.

In the critical sysfs entry the thermal hwmon was returning wrong
temperature to the user-space.  It was reporting the temperature of the
first trip point instead of the temperature of critical trip point.

For example:
	/sys/class/hwmon/hwmon0/temp1_crit:50000
	/sys/class/thermal/thermal_zone0/trip_point_0_temp:50000
	/sys/class/thermal/thermal_zone0/trip_point_0_type:active
	/sys/class/thermal/thermal_zone0/trip_point_3_temp:120000
	/sys/class/thermal/thermal_zone0/trip_point_3_type:critical

Since commit e68b16abd91d ("thermal: add hwmon sysfs I/F") the driver
have been registering a sysfs entry if get_crit_temp() callback was
provided.  However when accessed, it was calling get_trip_temp() instead
of the get_crit_temp().

Fixes: e68b16abd91d ("thermal: add hwmon sysfs I/F")
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Zhang Rui 
Signed-off-by: Greg Kroah-Hartman

thermal/powerclamp: add back module device table

2016-11-21T12:54:40+00:00

Commit 3105f234e0aba43e44e277c20f9b32ee8add43d4 replaced module
cpu id table with a cpu feature check, which is logically correct.
But we need the module device table to allow module auto loading.

Cc: stable@vger.kernel.org # 4.8
Fixes:3105f234 thermal/powerclamp: correct cpu support check
Signed-off-by: Jacob Pan 
Signed-off-by: Zhang Rui

thermal/powerclamp: correct cpu support check

2016-10-20T06:15:44+00:00

Initial logic for checking CPU match resulted in OR of CPU features
rather than the intended AND.

Updated to use boot_cpu_has macro rather than x86_match_cpu.

In addition, MWAIT is the only required CPU feature for idle
injection to work.  Drop other feature requirements since they are
only needed for optimal efficiency.

CC: stable@vger.kernel.org #v4.7
Signed-off-by: Eric Ernst 
Acked-by: Jacob Pan 
Signed-off-by: Zhang Rui

thermal: intel_pch_thermal: Enable Haswell PCH

2016-10-20T06:15:44+00:00

Added missing support for Haswell PCH thermal sensor.

Signed-off-by: Srinivas Pandruvada 
Signed-off-by: Zhang Rui

thermal: intel_pch_thermal: Add an ACPI passive trip

2016-10-20T06:15:44+00:00

On the platforms which has an ACPI companion device associated with
PCH thermal device, read passive trip temperature via ACPI _PSV
control method.

Signed-off-by: Srinivas Pandruvada 
Signed-off-by: Zhang Rui

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

2016-10-12T18:05:23+00:00

Pull thermal managament updates from Zhang Rui:

 - Enhance thermal "userspace" governor to export the reason when a
   thermal event is triggered and delivered to user space. From Srinivas
   Pandruvada

 - Introduce a single TSENS thermal driver for the different versions of
   the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for
   msm8916, msm8960, msm8974 and msm8996 families is also added. From
   Rajendra Nayak

 - Introduce hardware-tracked trip points support to the device tree
   thermal sensor framework. The framework supports an arbitrary number
   of trip points. Whenever the current temperature is changed, the trip
   points immediately below and above the current temperature are found,
   driver callback is invoked to program the hardware to get notified
   when either of the two trip points are triggered. Hardware-tracked
   trip points support for rockchip thermal driver is also added at the
   same time. From Sascha Hauer, Caesar Wang

 - Introduce a new thermal driver, which enables TMU (Thermal Monitor
   Unit) on QorIQ platform. From Jia Hongtao

 - Introduce a new thermal driver for Maxim MAX77620. From Laxman
   Dewangan

 - Introduce a new thermal driver for Intel platforms using WhiskeyCove
   PMIC. From Bin Gao

 - Add mt2701 chip support to MTK thermal driver. From Dawei Chien

 - Enhance Tegra thermal driver to enable soctherm node and set
   "critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei
   Ni

 - Add resume support for tango thermal driver. From Marc Gonzalez

 - several small fixes and improvements for rockchip, qcom, imx, rcar,
   mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy,
   Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh
   Kang

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits)
  thermal: int3403: Process trip change notification
  thermal: int340x: New Interface to read trip and notify
  thermal: user_space gov: Add additional information in uevent
  thermal: Enhance thermal_zone_device_update for events
  arm64: tegra: set hot trips for Tegra210
  arm64: tegra: set critical trips for Tegra210
  arm64: tegra: add soctherm node for Tegra210
  arm64: tegra: set hot trips for Tegra132
  arm64: tegra: set critical trips for Tegra132
  arm64: tegra: use tegra132-soctherm for Tegra132
  arm: tegra: set hot trips for Tegra124
  arm: tegra: set critical trips for Tegra124
  thermal: tegra: add hw-throttle for Tegra132
  thermal: tegra: add hw-throttle function
  of: Add bindings of hw throttle for Tegra soctherm
  thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register
  thermal: Add Mediatek thermal driver for mt2701.
  dt-bindings: thermal: Add binding document for Mediatek thermal controller
  thermal: max77620: Add thermal driver for reporting junction temp
  thermal: max77620: Add DT binding doc for thermal driver
  ...

thermal: int3403: Process trip change notification

2016-09-27T06:37:17+00:00

When ACPI sends notification for trip point change re-read trips and
notify thermal core, so that this can be passed to user space thermal
controller.

Signed-off-by: Srinivas Pandruvada 
Signed-off-by: Zhang Rui

thermal: int340x: New Interface to read trip and notify

2016-09-27T06:37:14+00:00

Separated the code for reading trip points from int340x_thermal_zone_add to
a standalone function int340x_thermal_read_trips. This standlone
interface to read is exported so that int340x drivers can re-read trips
on ACPI notification for trip point change.
Also the appropriate notification events are sent by int340x driver based
on the acpi event using int340x_thermal_zone_device_update().

Signed-off-by: Srinivas Pandruvada 
Signed-off-by: Zhang Rui

thermal: user_space gov: Add additional information in uevent

2016-09-27T06:37:10+00:00

Add additional properties:
NAME= Thermal zone type
TEMP= Temperature sample value
TRIP= Violated trip index
EVENT= The notification event (new temperature sample, trip violation
trip changed)

This is the additional information to what kobject_uevent already
provides. So it will not impact existing user spaces.

Signed-off-by: Srinivas Pandruvada 
Signed-off-by: Zhang Rui

thermal: Enhance thermal_zone_device_update for events

2016-09-27T06:35:21+00:00

Added one additional parameter to thermal_zone_device_update() to provide
caller with an optional capability to specify reason.
Currently this event is used by user space governor to trigger different
processing based on event code. Also it saves an additional call to read
temperature when the event is received.
The following events are cuurently defined:
- Unspecified event
- New temperature sample
- Trip point violated
- Trip point changed
- thermal device up and down
- thermal device power capability changed

Signed-off-by: Srinivas Pandruvada 
Signed-off-by: Zhang Rui