linux-toradex.git/drivers/thunderbolt/icm.c, branch v6.18

thunderbolt: Notify userspace about firmware CM tunneling events

2025-04-24T05:24:39+00:00

In the same way we do for software connection manager, send
notifications about tunneling changes done by the firmware connection
manager as well. There are some limitations with this though, for
example we only get "DP Configuration Changed" message from the firmware
without any indication if DisplayPort tunnel was activated or
deactivated. Also we don't get information about the tunnel itself
either so the event then looks like:

  TUNNEL_EVENT=changed
  TUNNEL_DETAILS=(DP)

XDomain connections are similar to what the software connection manager
sends.

Signed-off-by: Alan Borzeszkowski 
Signed-off-by: Mika Westerberg

thunderbolt: Enable NVM upgrade support on Intel Maple Ridge

2024-04-08T04:47:38+00:00

Intel Maple Ridge supports NVM firmware upgrade with the same flows used
on previous discrete Thunderbolt contollers from Intel (such as Titan
Ridge). Advertise NVM upgrade support for Maple Ridge in icm_probe() to
expose the corresponding files in /sys/bus/thunderbolt. The NVM firmware
process was successfully tested on a system with a JHL8540 controller
(ASUS ProArt Z790-CREATOR).

Signed-off-by: Alex James 
Signed-off-by: Mika Westerberg

thunderbolt: Reset topology created by the boot firmware

2024-01-22T11:21:06+00:00

Boot firmware (typically BIOS) might have created tunnels of its own.
The tunnel configuration that it does might be sub-optimal. For instance
it may only support HBR2 monitors so the DisplayPort tunnels it created
may limit Linux graphics drivers. In addition there is an issue on some
AMD based systems where the BIOS does not allocate enough PCIe resources
for future topology extension. By resetting the USB4 topology the PCIe
links will be reset as well allowing Linux to re-allocate.

This aligns the behavior with Windows Connection Manager.

We already issued host router reset for USB4 v2 routers, now extend it
to USB4 v1 routers as well. For pre-USB4 (that's Apple systems) we leave
it as is and continue to discover the existing tunnels.

Suggested-by: Mario Limonciello 
Signed-off-by: Sanath S 
Signed-off-by: Mika Westerberg

thunderbolt: Reduce retry timeout to speed up boot for some devices

2023-12-22T11:00:26+00:00

This is a followup to "thunderbolt: Workaround an IOMMU fault on certain
systems with Intel Maple Ridge".

It seems like the timeout can be reduced to 250ms. This reduces the overall
delay caused by the retires to ~1s. This is about the time other things
being initialized in parallel need anyway*, so like this the effective boot
time is no longer compromised.

*I only had a single device available for my measurements: A Clevo X170KM-G
desktop replacement notebook.

Signed-off-by: Werner Sembach 
Signed-off-by: Mika Westerberg

thunderbolt: Workaround an IOMMU fault on certain systems with Intel Maple Ridge

2023-09-15T09:59:02+00:00

On some systems the IOMMU blocks the first couple of driver ready
messages to the connection manager firmware as can be seen in below
excerpts:

  thunderbolt 0000:06:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbb0e3400 flags=0x0020]

or

  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Write] Request device [04:00.0] PASID ffffffff fault addr 69974000 [fault reason 05] PTE Write access is not set

The reason is unknown and hard to debug because we were not able to
reproduce this locally. This only happens on certain systems with Intel
Maple Ridge Thunderbolt controller. If there is a device connected when
the driver is loaded the issue does not happen either. Only when there
is nothing connected (so typically when the system is booted up).

We can work this around by sending the driver ready several times. After
a couple of retries the message goes through and the controller works
just fine. For this reason make the number of retries a parameter for
icm_request() and then for Maple Ridge (and Titan Ridge as they us the
same function but this should not matter) increase number of retries
while shortening the timeout accordingly.

Reported-by: Werner Sembach 
Reported-by: Konrad J Hambrick 
Reported-by: Calvin Walton 
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=214259
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg

thunderbolt: Add support for USB4 v2 80 Gb/s link

2023-06-16T06:53:27+00:00

USB4 v2 bumps the per-lane speed up to 40 Gb/s. Also the lanes are
always bonded which gives 80 Gb/s symmetric link (and 120/40 Gb/s
asymmetric). This updates the speed and width of routers and XDomain
connections to support the Gen 4 link. For now we keep the link as is
even if it is already asymmetric.

While there make tb_port_set_link_width() static.

Signed-off-by: Gil Fine 
Signed-off-by: Mika Westerberg

thunderbolt: Introduce tb_switch_downstream_port()

2023-06-09T09:07:22+00:00

Introduce tb_switch_downstream_port() helper function that returns the
downstream port of a parent switch that is connected to the upstream
port of specified switch. From now on, we use it all across the driver
where applicable.

While there fix a whitespace in comment and rename 'downstream' to
'down' to be consistent with the rest of the driver.

Signed-off-by: Gil Fine 
Signed-off-by: Mika Westerberg

Merge tag 'thunderbolt-for-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next

2022-09-30T11:44:59+00:00

Mika writes:
  "thunderbolt: Changes for v6.1 merge window

   This includes following Thunderbolt/USB4 changes for the v6.1 merge
   window:
     - Support for Intel Meteor Lake integrated Thunderbolt/USB4 controller
     - Support for ASMedia USB4 controller NVM firmware upgrade
     - Receiver lane margining support
     - Few fixes and cleanups.

   All these have been in linux-next with no reported issues."

* tag 'thunderbolt-for-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
  thunderbolt: Explicitly enable lane adapter hotplug events at startup
  thunderbolt: Use dev_err_probe()
  thunderbolt: Convert to use sysfs_emit()/sysfs_emit_at() APIs
  thunderbolt: Fix spelling mistake "simultaneusly" -> "simultaneously"
  thunderbolt: debugfs: Fix spelling mistakes in seq_puts text
  thunderbolt: Add support for ASMedia NVM image format
  thunderbolt: Move vendor specific NVM handling into nvm.c
  thunderbolt: Provide tb_retimer_nvm_read() analogous to tb_switch_nvm_read()
  thunderbolt: Rename and make nvm_read() available for other files
  thunderbolt: Extend NVM version fields to 32-bits
  thunderbolt: Allow NVM upgrade of USB4 host routers
  thunderbolt: Add support for receiver lane margining
  thunderbolt: Add helper to check if CL states are enabled on port
  thunderbolt: Pass CL state bitmask to tb_port_clx_supported()
  thunderbolt: Move port CL state functions into correct place in switch.c
  thunderbolt: Move tb_xdomain_parent() to tb.h
  thunderbolt: Add support for Intel Meteor Lake
  thunderbolt: Add comment where Thunderbolt 4 PCI IDs start
  thunderbolt: Add DP OUT resource when DP tunnel is discovered

thunderbolt: Add support for Intel Maple Ridge single port controller

2022-09-09T05:45:57+00:00

Add support for Maple Ridge discrete USB4 host controller from Intel
which has a single USB4 port (versus the already supported dual port
Maple Ridge USB4 host controller).

Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine 
Signed-off-by: Mika Westerberg

thunderbolt: Add support for Intel Meteor Lake

2022-08-22T09:21:33+00:00

Intel Meteor Lake has the same integrated Thunderbolt/USB4 controller as
Intel Alder Lake. Add the Intel Meteor Lake PCI IDs to the driver list
of supported devices.

Signed-off-by: Mika Westerberg