linux-toradex.git/drivers/tty/serial/8250, branch v4.4.73 Linux kernel for Apalis and Colibri modules serial: 8250_omap: Fix probe and remove for PM runtime 2017-05-14T11:32:57+00:00 Tony Lindgren tony@atomide.com 2017-01-20T20:22:31+00:00 cdbe65441d66c729073a64fdcd3d10142becf5f9 commit 4e0f5cc65098ea32a1e77baae74215b9bd5276b1 upstream. Otherwise the interconnect related code implementing PM runtime will produce these errors on a failed probe: omap_uart 48066000.serial: omap_device: omap_device_enable() called from invalid state 1 omap_uart 48066000.serial: use pm_runtime_put_sync_suspend() in driver? Note that we now also need to check for priv in omap8250_runtime_suspend() as it has not yet been registered if probe fails. And we need to use pm_runtime_put_sync() to properly idle the device like we already do in omap8250_remove(). Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4e0f5cc65098ea32a1e77baae74215b9bd5276b1 upstream.

Otherwise the interconnect related code implementing PM runtime will
produce these errors on a failed probe:

omap_uart 48066000.serial: omap_device: omap_device_enable() called from invalid state 1
omap_uart 48066000.serial: use pm_runtime_put_sync_suspend() in driver?

Note that we now also need to check for priv in omap8250_runtime_suspend()
as it has not yet been registered if probe fails. And we need to use
pm_runtime_put_sync() to properly idle the device like we already do
in omap8250_remove().

Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8250_pci: Fix potential use-after-free in error path 2017-05-08T05:46:02+00:00 Gabriel Krisman Bertazi krisman@linux.vnet.ibm.com 2016-12-28T18:42:00+00:00 35c9bfa51154cc3519e93970c69afe13f93757ac commit c130b666a9a711f985a0a44b58699ebe14bb7245 upstream. Commit f209fa03fc9d ("serial: 8250_pci: Detach low-level driver during PCI error recovery") introduces a potential use-after-free in case the pciserial_init_ports call in serial8250_io_resume fails, which may happen if a memory allocation fails or if the .init quirk failed for whatever reason). If this happen, further pci_get_drvdata will return a pointer to freed memory. This patch reworks the PCI recovery resume hook to restore the old priv structure in this case, which should be ok, since the ports were already detached. Such error during recovery causes us to give up on the recovery. Fixes: f209fa03fc9d ("serial: 8250_pci: Detach low-level driver during PCI error recovery") Reported-by: Michal Suchanek <msuchanek@suse.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c130b666a9a711f985a0a44b58699ebe14bb7245 upstream.

Commit f209fa03fc9d ("serial: 8250_pci: Detach low-level driver during
PCI error recovery") introduces a potential use-after-free in case the
pciserial_init_ports call in serial8250_io_resume fails, which may
happen if a memory allocation fails or if the .init quirk failed for
whatever reason).  If this happen, further pci_get_drvdata will return a
pointer to freed memory.

This patch reworks the PCI recovery resume hook to restore the old priv
structure in this case, which should be ok, since the ports were already
detached. Such error during recovery causes us to give up on the
recovery.

Fixes: f209fa03fc9d ("serial: 8250_pci: Detach low-level driver during PCI error recovery")
Reported-by: Michal Suchanek <msuchanek@suse.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_pci: Detach low-level driver during PCI error recovery 2017-03-30T07:35:20+00:00 Sumit Semwal sumit.semwal@linaro.org 2017-03-25T16:18:19+00:00 ac601978a2aad7fbb617f0187268011b577a127f From: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> [ Upstream commit f209fa03fc9d131b3108c2e4936181eabab87416 ] During a PCI error recovery, like the ones provoked by EEH in the ppc64 platform, all IO to the device must be blocked while the recovery is completed. Current 8250_pci implementation only suspends the port instead of detaching it, which doesn't prevent incoming accesses like TIOCMGET and TIOCMSET calls from reaching the device. Those end up racing with the EEH recovery, crashing it. Similar races were also observed when opening the device and when shutting it down during recovery. This patch implements a more robust IO blockage for the 8250_pci recovery by unregistering the port at the beginning of the procedure and re-adding it afterwards. Since the port is detached from the uart layer, we can be sure that no request will make through to the device during recovery. This is similar to the solution used by the JSM serial driver. I thank Peter Hurley <peter@hurleysoftware.com> for valuable input on this one over one year ago. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
From: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>

[ Upstream commit f209fa03fc9d131b3108c2e4936181eabab87416 ]

During a PCI error recovery, like the ones provoked by EEH in the ppc64
platform, all IO to the device must be blocked while the recovery is
completed.  Current 8250_pci implementation only suspends the port
instead of detaching it, which doesn't prevent incoming accesses like
TIOCMGET and TIOCMSET calls from reaching the device.  Those end up
racing with the EEH recovery, crashing it.  Similar races were also
observed when opening the device and when shutting it down during
recovery.

This patch implements a more robust IO blockage for the 8250_pci
recovery by unregistering the port at the beginning of the procedure and
re-adding it afterwards.  Since the port is detached from the uart
layer, we can be sure that no request will make through to the device
during recovery.  This is similar to the solution used by the JSM serial
driver.

I thank Peter Hurley <peter@hurleysoftware.com> for valuable input on
this one over one year ago.

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards 2017-03-15T01:57:11+00:00 Ian Abbott abbotti@mev.co.uk 2017-02-03T20:25:00+00:00 4b34572e98f1b0d0df4ea084347b89b5a20fbede commit 1c9c858e2ff8ae8024a3d75d2ed080063af43754 upstream. The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports, respectively. The first 4 ports are implemented by an OX16PCI954 chip, and the second 4 ports are implemented by an OX16C954 chip on a local bus, bridged by the second PCI function of the OX16PCI954. The ports are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a non-standard oscillator frequency of 20 MHz (base_baud = 1250000). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1c9c858e2ff8ae8024a3d75d2ed080063af43754 upstream.

The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta
Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports,
respectively.  The first 4 ports are implemented by an OX16PCI954 chip,
and the second 4 ports are implemented by an OX16C954 chip on a local
bus, bridged by the second PCI function of the OX16PCI954.  The ports
are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a
non-standard oscillator frequency of 20 MHz (base_baud = 1250000).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_dw: Check the data->pclk when get apb_pclk 2016-10-22T10:26:54+00:00 Kefeng Wang wangkefeng.wang@huawei.com 2016-08-24T08:33:33+00:00 42c947900f8d017ebfdca25fa214f87820734db7 commit e16b46f190a22587898b331f9d58583b0b166c9a upstream. It should check the data->pclk, not data->clk when get apb_pclk. Fixes: c8ed99d4f6a8("serial: 8250_dw: Add support for deferred probing") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e16b46f190a22587898b331f9d58583b0b166c9a upstream.

It should check the data->pclk, not data->clk when get apb_pclk.

Fixes: c8ed99d4f6a8("serial: 8250_dw: Add support for deferred probing")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250: added acces i/o products quad and octal serial cards 2016-09-24T08:07:38+00:00 Jimi Damon jdamon@accesio.com 2016-07-21T00:00:40+00:00 58559c6776bee647e48c0673d69af3b398a3d346 commit c8d192428f52f244130b84650ad616df09f2b1e1 upstream. Added devices ids for acces i/o products quad and octal serial cards that make use of existing Pericom PI7C9X7954 and PI7C9X7958 configurations . Signed-off-by: Jimi Damon <jdamon@accesio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c8d192428f52f244130b84650ad616df09f2b1e1 upstream.

Added devices ids for acces i/o products quad and octal serial cards
that make use of existing Pericom PI7C9X7954 and PI7C9X7958
configurations .

Signed-off-by: Jimi Damon <jdamon@accesio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_mid: fix divide error bug if baud rate is 0 2016-09-24T08:07:38+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2016-07-01T14:21:49+00:00 d5d1383049c8d4ed1b906850175be2f547ba574e commit 47b34d2ef266e2c283b514d65c8963c2ccd42474 upstream. Since the commit c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Reported-by: "Mendez Salinas, Fernando" <fernando.mendez.salinas@intel.com> Fixes: c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 47b34d2ef266e2c283b514d65c8963c2ccd42474 upstream.

Since the commit c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by
formula for Intel MID"), the 8250 driver crashes in the byt_set_termios()
function with a divide error. This is caused by the fact that a baud rate of 0
(B0) is not handled properly. Fix it by falling back to B9600 in this case.

Reported-by: "Mendez Salinas, Fernando" <fernando.mendez.salinas@intel.com>
Fixes: c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_mid: recognize interrupt source in handler 2016-06-01T19:15:53+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2016-04-04T14:35:10+00:00 430b4aab73830577eb22aa434b35947f87e7ea4b commit c42850f1ae7e70056f852e67bb9dddf927853b47 upstream. There is a special register that shows interrupt status by source. In particular case the source can be a combination of DMA Tx, DMA Rx, and UART. Read the register and call the handlers only for sources that request an interrupt. Fixes: 6ede6dcd87aa ("serial: 8250_mid: add support for DMA engine handling from UART MMIO") Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c42850f1ae7e70056f852e67bb9dddf927853b47 upstream.

There is a special register that shows interrupt status by source. In
particular case the source can be a combination of DMA Tx, DMA Rx, and UART.

Read the register and call the handlers only for sources that request an
interrupt.

Fixes: 6ede6dcd87aa ("serial: 8250_mid: add support for DMA engine handling from UART MMIO")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_mid: use proper bar for DNV platform 2016-06-01T19:15:53+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2016-04-04T14:35:09+00:00 3c5dafe43d1e36b70606d3baef8d7f24c0883343 commit 107e15fc1f8d6ef69eac5f175971252f76e82f0d upstream. Unlike Intel Medfield and Tangier platforms DNV uses PCI BAR0 for IO compatible resources and BAR1 for MMIO. We need latter in a way to support DMA. Introduce an additional field in the internal structure and pass PCI BAR based on device ID. Reported-by: "Lai, Poey Seng" <poey.seng.lai@intel.com> Fixes: 6ede6dcd87aa ("serial: 8250_mid: add support for DMA engine handling from UART MMIO") Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 107e15fc1f8d6ef69eac5f175971252f76e82f0d upstream.

Unlike Intel Medfield and Tangier platforms DNV uses PCI BAR0 for IO compatible
resources and BAR1 for MMIO. We need latter in a way to support DMA. Introduce
an additional field in the internal structure and pass PCI BAR based on device
ID.

Reported-by: "Lai, Poey Seng" <poey.seng.lai@intel.com>
Fixes: 6ede6dcd87aa ("serial: 8250_mid: add support for DMA engine handling from UART MMIO")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_pci: fix divide error bug if baud rate is 0 2016-06-01T19:15:52+00:00 David Müller d.mueller@elsoft.ch 2016-04-27T09:58:32+00:00 1401ebda89ebf3156984c175209f630e0844f6ce commit 6f210c18c1c0f016772c8cd51ae12a02bfb9e7ef upstream. Since commit 21947ba654a6 ("serial: 8250_pci: replace switch-case by formula"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Signed-off-by: David Müller <d.mueller@elsoft.ch> Fixes: 21947ba654a6 ("serial: 8250_pci: replace switch-case by formula") Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6f210c18c1c0f016772c8cd51ae12a02bfb9e7ef upstream.

Since commit 21947ba654a6 ("serial: 8250_pci: replace switch-case by
formula"), the 8250 driver crashes in the byt_set_termios() function
with a divide error. This is caused by the fact that a baud rate of 0 (B0)
is not handled properly. Fix it by falling back to B9600 in this case.

Signed-off-by: David Müller <d.mueller@elsoft.ch>
Fixes: 21947ba654a6 ("serial: 8250_pci: replace switch-case by formula")
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>