linux-toradex.git/drivers/tty/serial/amba-pl010.c, branch v4.8-rc2

serial: Test/disable MSIs if switching from N_PPS

2014-11-06T22:57:27+00:00

Switching to the N_PPS line discipline may require enabling
modem status interrupts; conversely switching from N_PPS may
require disabling modem status interrupts.

Affected drivers:
8250
amba-pl010
atmel

Cc: Nicolas Ferre 
Cc: Russell King 
Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman

serial: Take uart port lock for direct *_enable_ms()

2014-11-06T22:57:27+00:00

Three UART drivers (8250, atmel & amba-pl010) directly call their
enable_ms() method; the uart port lock must be acquired before
any h/w programming.

Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman

serial: core: Pass termios to set_ldisc() notifications

2014-11-06T22:57:27+00:00

UART drivers which enable modem status interrupts when switching
to N_PPS line discipline need to determine if modem status
interrupts should be disabled when switching from N_PPS.
Specifically, the set_ldisc() notification needs to evaluate
UART_ENABLE_MS() which requires termios->c_cflag.

Convert in-tree UART drivers to new interface.

Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman

serial: amba-pl010: use container_of to resolve uart_amba_port from uart_port

2014-11-06T03:20:52+00:00

Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick 
Signed-off-by: Greg Kroah-Hartman

serial: amba-pl010: Use devres APIs

2014-07-10T00:13:54+00:00

Migrating to use devres managed APIs devm_kzalloc, devm_ioremap and
devm_clk_get.

Signed-off-by: Tushar Behera 
Reviewed-by: Daniel Thompson 
Signed-off-by: Greg Kroah-Hartman

serial: Fix IGNBRK handling

2014-06-19T20:04:52+00:00

If IGNBRK is set without either BRKINT or PARMRK set, some uart
drivers send a 0x00 byte for BREAK without the TTYBREAK flag to the
line discipline, when it should send either nothing or the TTYBREAK flag
set. This happens because the read_status_mask masks out the BI
condition, which uart_insert_char() then interprets as a normal 0x00 byte.

SUS v3 is clear regarding the meaning of IGNBRK; Section 11.2.2, General
Terminal Interface - Input Modes, states:
  "If IGNBRK is set, a break condition detected on input shall be ignored;
   that is, not put on the input queue and therefore not read by any
   process."

Fix read_status_mask to include the BI bit if IGNBRK is set; the
lsr status retains the BI bit if a BREAK is recv'd, which is
subsequently ignored in uart_insert_char() when masked with the
ignore_status_mask.

Affected drivers:
8250 - all
serial_txx9
mfd
amba-pl010
amba-pl011
atmel_serial
bfin_uart
dz
ip22zilog
max310x
mxs-auart
netx-serial
pnx8xxx_uart
pxa
sb1250-duart
sccnxp
serial_ks8695
sirfsoc_uart
st-asc
vr41xx_siu
zs
sunzilog
fsl_lpuart
sunsab
ucc_uart
bcm63xx_uart
sunsu
efm32-uart
pmac_zilog
mpsc
msm_serial
m32r_sio

Unaffected drivers:
omap-serial
rp2
sa1100
imx
icom

Annotated for fixes:
altera_uart
mcf

Drivers without break detection:
21285
xilinx-uartps
altera_jtaguart
apbuart
arc-uart
clps711x
max3100
uartlite
msm_serial_hs
nwpserial
lantiq
vt8500_serial

Unknown:
samsung
mpc52xx_uart
bfin_sport_uart
cpm_uart/core

Fixes: Bugzilla #71651, '8250_core.c incorrectly handles IGNBRK flag'
Reported-by: Ivan 
Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman

serial: pl010: Convert to modern PM ops

2013-12-09T01:09:07+00:00

Convert to modern PM ops and use the SIMPLE_DEV_PM_OPS macro to set up
the PM callbacks.

Cc: Greg Kroah-Hartman 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

serial: Remove unnecessary amba_set_drvdata()

2013-10-03T23:09:47+00:00

Driver core clears the driver data to NULL after device_release
or on probe failure, so just remove it from here.

Driver core change:
"device-core: Ensure drvdata = NULL when no driver is bound"
(sha1: 0998d0631001288a5974afc0b2a5f568bcdecb4d)

Signed-off-by: Michal Simek 
Signed-off-by: Greg Kroah-Hartman

serial: use dev_get_platdata()

2013-08-01T00:56:15+00:00

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han 
Signed-off-by: Greg Kroah-Hartman

TTY: switch tty_flip_buffer_push

2013-01-16T06:30:15+00:00

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

Now, the one where most of tty_port_tty_get gets removed:
tty_flip_buffer_push.

IOW we also closed all the races in drivers not using tty_port_tty_get
at all yet.

Also we move tty_flip_buffer_push declaration from include/linux/tty.h
to include/linux/tty_flip.h to all others while we are changing it
anyway.

Signed-off-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman