linux-toradex.git/drivers/tty/serial/cpm_uart, branch v6.0-rc4

serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE

2022-05-19T16:31:58+00:00

drivers/tty/serial/cpm_uart/cpm_uart_core.c: In function ‘cpm_uart_init_port’:
drivers/tty/serial/cpm_uart/cpm_uart_core.c:1251:7: error: ‘udbg_port’ undeclared (first use in this function); did you mean ‘uart_port’?
  if (!udbg_port)
       ^~~~~~~~~
       uart_port

commit d142585bceb3 leave this corner, wrap it with #ifdef block

Fixes: d142585bceb3 ("serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE")
Signed-off-by: YueHaibing 
Link: https://lore.kernel.org/r/20220518135452.39480-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman

serial: allow COMPILE_TEST for some drivers

2022-04-22T14:21:53+00:00

Some more serial drivers can be compile-tested under certain
circumstances (when building a specific architecture). So allow for
that.

This reduces the need of zillion mach/subarch-specific configs. And
since the 0day bot has only allmodconfig's for some archs, this
increases build coverage there too.

Note that cpm needs a minor update in the header, so that it drags in
at least some defines (CPM2 ones).

Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20220421101708.5640-8-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

tty: serial: Prepare cleanup of powerpc's asm/prom.h

2022-04-15T06:42:29+00:00

powerpc's asm/prom.h brings some headers that it doesn't
need itself.

In order to clean it up, first add missing headers in
users of asm/prom.h

Reviewed-by: Jiri Slaby 
Signed-off-by: Christophe Leroy 
Link: https://lore.kernel.org/r/49fc0d4b6446da630b1e9f29c4bab38f8ed087bf.1648833419.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman

serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE

2021-10-30T09:01:48+00:00

If CONFIG_CONSOLE_POLL=y, and CONFIG_SERIAL_CPM=m (hence
CONFIG_SERIAL_CPM_CONSOLE=n):

    drivers/tty/serial/cpm_uart/cpm_uart_core.c:1109:12: warning: ‘udbg_cpm_getc’ defined but not used [-Wunused-function]
     1109 | static int udbg_cpm_getc(void)
	  |            ^~~~~~~~~~~~~
    drivers/tty/serial/cpm_uart/cpm_uart_core.c:1095:13: warning: ‘udbg_cpm_putc’ defined but not used [-Wunused-function]
     1095 | static void udbg_cpm_putc(char c)
	  |             ^~~~~~~~~~~~~

Fix this by making the udbg definitions depend on
CONFIG_SERIAL_CPM_CONSOLE, in addition to CONFIG_CONSOLE_POLL.

Fixes: a60526097f42eb98 ("tty: serial: cpm_uart: Add udbg support for enabling xmon")
Signed-off-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/20211027075326.3270785-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman

tty: make use of tty_get_{char,frame}_size

2021-06-15T12:03:27+00:00

In the previous patch, we introduced tty_get_char_size() and
tty_get_frame_size() for computing character and frame sizes,
respectively. Here, we make use of them in various tty drivers where
applicable.

The stats look nice: 12 insertions, 169 deletions.

Cc: Arnd Bergmann 
Cc: David Lin 
Cc: Johan Hovold 
Cc: Alex Elder 
Cc: Shawn Guo 
Cc: Sascha Hauer 
Cc: Andy Gross 
Cc: Bjorn Andersson 
Cc: Maxime Coquelin 
Cc: Alexandre Torgue 
Cc: Oliver Neukum 
Acked-by: Alex Elder 
Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20210610090247.2593-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

tty: cpm_uart, use port->flags instead of low_latency

2021-01-07T15:17:31+00:00

This is the only in-kernel user of tty_port::low_latency. Switch this
last one to test uport->flags directly as tty_port::low_latency is going
away in the next patch.

Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20210105120239.28031-10-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

tty: serial: cpm_uart: Add udbg support for enabling xmon

2020-12-28T15:12:34+00:00

In order to use xmon with powerpc 8xx, the serial driver
must provide udbg_putc() and udpb_getc().

Provide them via cpm_put_poll_char() and cpm_get_poll_char().

This requires CONFIG_CONSOLE_POLL.

Signed-off-by: Christophe Leroy 
Link: https://lore.kernel.org/r/e4471bf81089252470efb3eed735d71a5b32adbd.1608716197.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman

tty: serial: cpm_uart: Fix behaviour for non existing GPIOs

2020-06-27T11:50:51+00:00

devm_gpiod_get_index() doesn't return NULL but -ENOENT when the
requested GPIO doesn't exist,  leading to the following messages:

[    2.742468] gpiod_direction_input: invalid GPIO (errorpointer)
[    2.748147] can't set direction for gpio #2: -2
[    2.753081] gpiod_direction_input: invalid GPIO (errorpointer)
[    2.758724] can't set direction for gpio #3: -2
[    2.763666] gpiod_direction_output: invalid GPIO (errorpointer)
[    2.769394] can't set direction for gpio #4: -2
[    2.774341] gpiod_direction_input: invalid GPIO (errorpointer)
[    2.779981] can't set direction for gpio #5: -2
[    2.784545] ff000a20.serial: ttyCPM1 at MMIO 0xfff00a20 (irq = 39, base_baud = 8250000) is a CPM UART

Use devm_gpiod_get_index_optional() instead.

At the same time, handle the error case and properly exit
with an error.

Fixes: 97cbaf2c829b ("tty: serial: cpm_uart: Convert to use GPIO descriptors")
Cc: stable@vger.kernel.org
Cc: Linus Walleij 
Signed-off-by: Christophe Leroy 
Reviewed-by: Linus Walleij 
Link: https://lore.kernel.org/r/694a25fdce548c5ee8b060ef6a4b02746b8f25c0.1591986307.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman

tty: serial: Use the correct style for SPDX License Identifier

2020-03-07T08:52:01+00:00

This patch corrects the SPDX License Identifier style in
header files related to tty serial drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.

Suggested-by: Joe Perches 
Signed-off-by: Nishad Kamdar 
Link: https://lore.kernel.org/r/20200301204517.GA10368@nishad
Signed-off-by: Greg Kroah-Hartman

tty: serial: cpm_uart: Convert to use GPIO descriptors

2020-03-06T12:16:16+00:00

The CPM UART (PowerPC) has an open coded GPIO modem control
handling. Since I can't test this I can't just migrate it to
the serial mctrl GPIO helper library though I wish I could.
I do second best and convert it to GPIO descriptors at least.

Cc: Rasmus Villemoes 
Cc: Christophe Leroy 
Signed-off-by: Linus Walleij 
Link: https://lore.kernel.org/r/20200229231842.247563-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman