linux-toradex.git/drivers/tty/serial/max310x.c, branch v6.6

serial: max310x: fix typos in comments

2023-08-04T13:08:09+00:00

cotroller -> controller.

Signed-off-by: Hugo Villeneuve 
Link: https://lore.kernel.org/r/20230803175931.981625-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman

serial: max310x: add comments for membase address workaround

2023-08-04T13:07:04+00:00

Add comments about workaround used to configure membase address. This
follows suggestions made during review of a sc16is7xx driver patch to
add the same workaround.

Link: https://lore.kernel.org/lkml/2936e18f-44ea-faed-9fa0-2ddefe7c3194@linux.intel.com
Link: https://lore.kernel.org/lkml/20230801131655.80bd8f97f018dda6155d65f6@hugovil.com/
Signed-off-by: Hugo Villeneuve 
Link: https://lore.kernel.org/r/20230803140551.970141-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman

serial: drivers: switch ch and flag to u8

2023-07-25T17:21:04+00:00

Now that the serial layer explicitly expects 'u8' for flags and
characters, propagate this type to drivers' (RX) routines.

Note that amba-pl011's, clps711x's and st-asc's 'ch' are left unchanged
because 'ch' contains not only a character, but whole status.

Signed-off-by: Jiri Slaby (SUSE) 
Cc: Tobias Klauser 
Cc: Russell King 
Cc: Vineet Gupta 
Cc: Richard Genoud 
Cc: Nicolas Ferre 
Cc: Alexandre Belloni 
Cc: Claudiu Beznea 
Cc: Alexander Shiyan 
Cc: Baruch Siach 
Cc: "Maciej W. Rozycki" 
Cc: Taichi Sugaya 
Cc: Takao Orito 
Cc: Shawn Guo 
Cc: Sascha Hauer 
Cc: Pengutronix Kernel Team 
Cc: Fabio Estevam 
Cc: NXP Linux Team 
Cc: Kevin Cernekee 
Cc: Krzysztof Kozlowski 
Cc: Alim Akhtar 
Cc: Laxman Dewangan 
Cc: Thierry Reding 
Cc: Jonathan Hunter 
Cc: Palmer Dabbelt 
Cc: Paul Walmsley 
Cc: Orson Zhai 
Cc: Baolin Wang 
Cc: Chunyan Zhang 
Cc: Patrice Chotard 
Cc: Maxime Coquelin 
Cc: Alexandre Torgue 
Cc: Hammer Hsieh 
Acked-by: Richard GENOUD 
Acked-by: Tobias Klauser 
Acked-by: Thierry Reding 
Acked-by: Maciej W. Rozycki 
Link: https://lore.kernel.org/r/20230712081811.29004-11-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman

serial: Switch i2c drivers back to use .probe()

2023-05-30T10:46:05+00:00

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20230525210147.734737-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman

serial: max310x: fix IO data corruption in batched operations

2023-04-20T11:46:13+00:00

After upgrading from 5.16 to 6.1, our board with a MAX14830 started
producing lots of garbage data over UART. Bisection pointed out commit
285e76fc049c as the culprit. That patch tried to replace hand-written
code which I added in 2b4bac48c1084 ("serial: max310x: Use batched reads
when reasonably safe") with the generic regmap infrastructure for
batched operations.

Unfortunately, the `regmap_raw_read` and `regmap_raw_write` which were
used are actually functions which perform IO over *multiple* registers.
That's not what is needed for accessing these Tx/Rx FIFOs; the
appropriate functions are the `_noinc_` versions, not the `_raw_` ones.

Fix this regression by using `regmap_noinc_read()` and
`regmap_noinc_write()` along with the necessary `regmap_config` setup;
with this patch in place, our board communicates happily again. Since
our board uses SPI for talking to this chip, the I2C part is completely
untested.

Fixes: 285e76fc049c ("serial: max310x: use regmap methods for SPI batch operations")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko 
Signed-off-by: Jan Kundrát 
Link: https://lore.kernel.org/r/79db8e82aadb0e174bc82b9996423c3503c8fb37.1680732084.git.jan.kundrat@cesnet.cz
Signed-off-by: Greg Kroah-Hartman

serial: Make uart_handle_cts_change() status param bool active

2023-01-19T15:04:35+00:00

Convert uart_handle_cts_change() to bool which is more appropriate
than unsigned int.

Rename status to active to better describe what the parameter means.
While at it, make the comment about the active parameter easier to
parse.

Cleanup callsites from operations that are not necessary with bool.

Reviewed-by: Jiri Slaby 
Signed-off-by: Ilpo Järvinen 
Link: https://lore.kernel.org/r/20230117090358.4796-10-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

serial: max310x: Use uart_xmit_advance()

2022-11-03T02:35:42+00:00

Take advantage of the new uart_xmit_advance() helper.

Reviewed-by: Andy Shevchenko 
Signed-off-by: Ilpo Järvinen 
Link: https://lore.kernel.org/r/20221019091151.6692-22-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-10-07T23:36:24+00:00

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of TTY and Serial driver updates for 6.1-rc1.

  Lots of cleanups in here, no real new functionality this time around,
  with the diffstat being that we removed more lines than we added!

  Included in here are:

   - termios unification cleanups from Al Viro, it's nice to finally get
     this work done

   - tty serial transmit cleanups in various drivers in preparation for
     more cleanup and unification in future releases (that work was not
     ready for this release)

   - n_gsm fixes and updates

   - ktermios cleanups and code reductions

   - dt bindings json conversions and updates for new devices

   - some serial driver updates for new devices

   - lots of other tiny cleanups and janitorial stuff. Full details in
     the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
  serial: cpm_uart: Don't request IRQ too early for console port
  tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
  tty: serial: unify TX space reads under altera_jtaguart_tx_space()
  tty: serial: use FIELD_GET() in lqasc_tx_ready()
  tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
  tty: serial: allow pxa.c to be COMPILE_TESTed
  serial: stm32: Fix unused-variable warning
  tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
  serial: 8250: Fix restoring termios speed after suspend
  serial: Deassert Transmit Enable on probe in driver-specific way
  serial: 8250_dma: Convert to use uart_xmit_advance()
  serial: 8250_omap: Convert to use uart_xmit_advance()
  MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
  serial: stm32: Deassert Transmit Enable on ->rs485_config()
  serial: ar933x: Deassert Transmit Enable on ->rs485_config()
  tty: serial: atmel: Use FIELD_PREP/FIELD_GET
  tty: serial: atmel: Make the driver aware of the existence of GCLK
  tty: serial: atmel: Only divide Clock Divisor if the IP is USART
  tty: serial: atmel: Separate mode clearing between UART and USART
  dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
  ...

serial: Make ->set_termios() old ktermios const

2022-08-30T12:22:35+00:00

There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko 
Signed-off-by: Ilpo Järvinen 
Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

i2c: Make remove callback return void

2022-08-16T10:46:26+00:00

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin 
Reviewed-by: Jeremy Kerr 
Reviewed-by: Benjamin Mugnier 
Reviewed-by: Javier Martinez Canillas 
Reviewed-by: Crt Mori 
Reviewed-by: Heikki Krogerus 
Acked-by: Greg Kroah-Hartman 
Acked-by: Marek Behún  # for leds-turris-omnia
Acked-by: Andy Shevchenko 
Reviewed-by: Petr Machata  # for mlxsw
Reviewed-by: Maximilian Luz  # for surface3_power
Acked-by: Srinivas Pandruvada  # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil  # for media/* + staging/media/*
Acked-by: Miguel Ojeda  # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli  # for versaclock5
Reviewed-by: Ajay Gupta  # for ucsi_ccg
Acked-by: Jonathan Cameron  # for iio
Acked-by: Peter Rosin  # for i2c-mux-*, max9860
Acked-by: Adrien Grassein  # for lontium-lt8912b
Reviewed-by: Jean Delvare  # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard  # for IPMI
Reviewed-by: Vladimir Oltean 
Acked-by: Dmitry Torokhov 
Acked-by: Sebastian Reichel  # for drivers/power
Acked-by: Krzysztof Hałasa 
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Wolfram Sang