linux-toradex.git/drivers/tty/serial/samsung_tty.c, branch v6.4-rc6 Linux kernel for Apalis and Colibri modules ARM: s3c: remove s3c24xx specific hacks 2023-01-16T08:26:05+00:00 Arnd Bergmann arnd@arndb.de 2022-09-29T13:43:53+00:00 1ea35b355722675b3b654475a37898742731d016 A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
similar symbols that are no longer available with the platform gone,
though the drivers themselves are still used on newer platforms,
so remove these hacks.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2022-12-16T11:31:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-12-16T11:31:56+00:00 dd6f9b17cd7af68b6a5090deedf1f5e84f66f4e6 Pull tty/serial driver updates from Greg KH: "Here is the "big" set of tty/serial driver changes for 6.2-rc1. As in previous kernel releases, nothing big here at all, just some small incremental serial/tty layer cleanups and some individual driver additions and fixes. Highlights are: - serial helper macros from Jiri Slaby to reduce the amount of duplicated code in serial drivers - api cleanups and consolidations from Ilpo Järvinen in lots of serial drivers - the usual set of n_gsm fixes from Daniel Starke as that code gets exercised more - TIOCSTI is finally able to be disabled if requested (security hardening feature from Kees Cook) - fsl_lpuart driver fixes and features added - other small serial driver additions and fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits) serial: atmel: don't stop the transmitter when doing PIO serial: atmel: cleanup atmel_start+stop_tx() tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API serial: sunsab: Fix error handling in sunsab_init() serial: altera_uart: fix locking in polling mode serial: pch: Fix PCI device refcount leak in pch_request_dma() tty: serial: fsl_lpuart: Use pm_ptr() to avoid need to make pm __maybe_unused tty: serial: fsl_lpuart: Add runtime pm support tty: serial: fsl_lpuart: enable wakeup source for lpuart serdev: Replace poll loop by readx_poll_timeout() macro tty: synclink_gt: unwind actions in error path of net device open serial: stm32: move dma_request_chan() before clk_prepare_enable() dt-bindings: serial: xlnx,opb-uartlite: Drop 'contains' from 'xlnx,use-parity' serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle. serial: amba-pl011: avoid SBSA UART accessing DMACR register tty: serial: altera_jtaguart: remove struct altera_jtaguart tty: serial: altera_jtaguart: use uart_port::read_status_mask tty: serial: altera_jtaguart: remove unused altera_jtaguart::sigs tty: serial: altera_jtaguart: remove flag from altera_jtaguart_rx_chars() n_tty: Rename tail to old_tail in n_tty_read() ... 
Pull tty/serial driver updates from Greg KH:
 "Here is the "big" set of tty/serial driver changes for 6.2-rc1.

  As in previous kernel releases, nothing big here at all, just some
  small incremental serial/tty layer cleanups and some individual driver
  additions and fixes. Highlights are:

   - serial helper macros from Jiri Slaby to reduce the amount of
     duplicated code in serial drivers

   - api cleanups and consolidations from Ilpo Järvinen in lots of
     serial drivers

   - the usual set of n_gsm fixes from Daniel Starke as that code gets
     exercised more

   - TIOCSTI is finally able to be disabled if requested (security
     hardening feature from Kees Cook)

   - fsl_lpuart driver fixes and features added

   - other small serial driver additions and fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits)
  serial: atmel: don't stop the transmitter when doing PIO
  serial: atmel: cleanup atmel_start+stop_tx()
  tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API
  serial: sunsab: Fix error handling in sunsab_init()
  serial: altera_uart: fix locking in polling mode
  serial: pch: Fix PCI device refcount leak in pch_request_dma()
  tty: serial: fsl_lpuart: Use pm_ptr() to avoid need to make pm __maybe_unused
  tty: serial: fsl_lpuart: Add runtime pm support
  tty: serial: fsl_lpuart: enable wakeup source for lpuart
  serdev: Replace poll loop by readx_poll_timeout() macro
  tty: synclink_gt: unwind actions in error path of net device open
  serial: stm32: move dma_request_chan() before clk_prepare_enable()
  dt-bindings: serial: xlnx,opb-uartlite: Drop 'contains' from 'xlnx,use-parity'
  serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
  serial: amba-pl011: avoid SBSA UART accessing DMACR register
  tty: serial: altera_jtaguart: remove struct altera_jtaguart
  tty: serial: altera_jtaguart: use uart_port::read_status_mask
  tty: serial: altera_jtaguart: remove unused altera_jtaguart::sigs
  tty: serial: altera_jtaguart: remove flag from altera_jtaguart_rx_chars()
  n_tty: Rename tail to old_tail in n_tty_read()
  ...
tty: serial: samsung_tty: use console_is_registered() 2022-12-02T10:25:01+00:00 John Ogness john.ogness@linutronix.de 2022-11-16T16:21:40+00:00 ad3b7f6141f8eeac275ca3f93c81596250125b4c It is not reliable to check for CON_ENABLED in order to identify if a console is registered. Use console_is_registered() instead. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20221116162152.193147-29-john.ogness@linutronix.de 
It is not reliable to check for CON_ENABLED in order to identify if a
console is registered. Use console_is_registered() instead.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-29-john.ogness@linutronix.de
serial: samsung_tty: Use uart_xmit_advance() 2022-11-03T02:35:42+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2022-10-19T09:11:35+00:00 ec04d75fe4386c7e5eafb72367e962f56694d490 Take advantage of the new uart_xmit_advance() helper. Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20221019091151.6692-29-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Take advantage of the new uart_xmit_advance() helper.

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20221019091151.6692-29-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: Make ->set_termios() old ktermios const 2022-08-30T12:22:35+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2022-08-16T11:57:37+00:00 bec5b814d46c2a704c3c8148752e62a33e9fa6dc There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2022-08-08T18:31:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-08-08T18:31:40+00:00 607ca0f742b7d990b6efb3c3e7a52830f7e96419 Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.0-rc1. It was delayed from last week as I wanted to make sure the last commit here got some good testing in linux-next and elsewhere as it seemed to show up only late in testing for some reason. Nothing major here, just lots of cleanups from Jiri and Ilpo to make the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also included in here is the obligatory n_gsm updates from Daniel Starke and lots of tiny driver updates and minor fixes and tweaks for other smaller serial drivers. All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements tty: amiserial: Fix comment typo tty: serial: document uart_get_console() tty: serial: serial_core, reformat kernel-doc for functions Documentation: serial: link uart_ops properly Documentation: serial: move GPIO kernel-doc to the functions Documentation: serial: dedup kernel-doc for uart functions Documentation: serial: move uart_ops documentation to the struct dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126 serial: mvebu-uart: uart2 error bits clearing tty: serial: fsl_lpuart: correct the count of break characters serial: stm32: make info structs static to avoid sparse warnings serial: fsl_lpuart: zero out parity bit in CS7 mode tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate. serial: 8250_bcm2835aux: Add missing clk_disable_unprepare() tty: vt: initialize unicode screen buffer serial: remove VR41XX serial driver serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags serial: 8250_dwlib: remove redundant sanity check for RS485 flags dt_bindings: rs485: Correct delay values ... 
Pull tty / serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.0-rc1.

  It was delayed from last week as I wanted to make sure the last commit
  here got some good testing in linux-next and elsewhere as it seemed to
  show up only late in testing for some reason.

  Nothing major here, just lots of cleanups from Jiri and Ilpo to make
  the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).

  Also included in here is the obligatory n_gsm updates from Daniel
  Starke and lots of tiny driver updates and minor fixes and tweaks for
  other smaller serial drivers.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
  tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
  tty: amiserial: Fix comment typo
  tty: serial: document uart_get_console()
  tty: serial: serial_core, reformat kernel-doc for functions
  Documentation: serial: link uart_ops properly
  Documentation: serial: move GPIO kernel-doc to the functions
  Documentation: serial: dedup kernel-doc for uart functions
  Documentation: serial: move uart_ops documentation to the struct
  dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
  serial: mvebu-uart: uart2 error bits clearing
  tty: serial: fsl_lpuart: correct the count of break characters
  serial: stm32: make info structs static to avoid sparse warnings
  serial: fsl_lpuart: zero out parity bit in CS7 mode
  tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
  tty: vt: initialize unicode screen buffer
  serial: remove VR41XX serial driver
  serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
  serial: 8250_dwlib: remove redundant sanity check for RS485 flags
  dt_bindings: rs485: Correct delay values
  ...
tty: serial: samsung_tty: fix s3c24xx_serial_set_mctrl() 2022-07-14T14:33:26+00:00 Marek Szyprowski m.szyprowski@samsung.com 2022-07-12T14:07:45+00:00 1d46c08d246e2e0a2d81985727392a5a8348d06a S3C2410_UCON is a 32bit register, so it must be read with rd_regl() instead of rd_reg(), otherwise the upper bits will be zeroed. Fix this. Fixes: 72a43046b61a ("tty: serial: samsung_tty: loopback mode support") Tested-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20220712140745.30362-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
S3C2410_UCON is a 32bit register, so it must be read with rd_regl()
instead of rd_reg(), otherwise the upper bits will be zeroed. Fix this.

Fixes: 72a43046b61a ("tty: serial: samsung_tty: loopback mode support")
Tested-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220712140745.30362-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: samsung_tty: loopback mode support 2022-06-30T15:09:08+00:00 Chanho Park chanho61.park@samsung.com 2022-06-29T00:41:41+00:00 72a43046b61a3fe7164a622224bcdfc3cf6b795d Internal loopback mode can be supported by setting UCON register's Loopback Mode bit. The mode & bit can be supported since s3c2410 and later SoCs. The prefix of LOOPBACK / BIT(5) naming should be also changed to S3C2410_ in order to avoid confusion. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220629004141.51484-1-chanho61.park@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Internal loopback mode can be supported by setting
UCON register's Loopback Mode bit. The mode & bit can be supported
since s3c2410 and later SoCs. The prefix of LOOPBACK / BIT(5) naming
should be also changed to S3C2410_ in order to avoid confusion.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220629004141.51484-1-chanho61.park@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: samsung_tty: support more than 4 uart ports 2022-06-30T15:08:46+00:00 Chanho Park chanho61.park@samsung.com 2022-06-29T00:55:38+00:00 9636047ffafcf5988946c05f0ebd7e0b2114aa74 Regarding Exynos Auto v9 SoC, it supports uarts up to 12. However, the maximum number of the ports has been derived from CONFIG_SERIAL_SAMSUNG_UARTS and tightly coupled with the config for previous Samsung SoCs such as s3c24xx and s3c64xx. To overcome this limitation, this changes the usage of the definition to UART_NR which is widely used from other serial drivers. This also defines the value to 12 only for ARM64 SoCs to not affect the change to previous arm32 SoCs. Instead of enumerating all the ports as predefined arrays, this introduces s3c24xx_serial_init_port_default that is initializing the structure as the default value. Reviewed-by: Hector Martin <marcan@marcan.st> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220629005538.60132-1-chanho61.park@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Regarding Exynos Auto v9 SoC, it supports uarts up to 12. However, the
maximum number of the ports has been derived from
CONFIG_SERIAL_SAMSUNG_UARTS and tightly coupled with the config for
previous Samsung SoCs such as s3c24xx and s3c64xx. To overcome this
limitation, this changes the usage of the definition to UART_NR which is
widely used from other serial drivers. This also defines the value to 12
only for ARM64 SoCs to not affect the change to previous arm32 SoCs.

Instead of enumerating all the ports as predefined arrays, this
introduces s3c24xx_serial_init_port_default that is initializing the
structure as the default value.

Reviewed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220629005538.60132-1-chanho61.park@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: samsung_tty: set dma burst_size to 1 2022-06-27T12:46:39+00:00 Chanho Park chanho61.park@samsung.com 2022-06-27T06:51:13+00:00 f7e35e4bf1e8dc2c8cbd5e0955dc1bd58558dae0 The src_maxburst and dst_maxburst have been changed to 1 but the settings of the UCON register aren't changed yet. They should be changed as well according to the dmaengine slave config. Fixes: aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions") Cc: stable <stable@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220627065113.139520-1-chanho61.park@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The src_maxburst and dst_maxburst have been changed to 1 but the settings
of the UCON register aren't changed yet. They should be changed as well
according to the dmaengine slave config.

Fixes: aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions")
Cc: stable <stable@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220627065113.139520-1-chanho61.park@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>