linux-toradex.git/drivers/tty/serial/sunsab.c, branch v4.9.30 Linux kernel for Apalis and Colibri modules Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core 2014-12-15T00:10:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-12-15T00:10:09+00:00 e6b5be2be4e30037eb551e0ed09dd97bd00d85d3 Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ... 
Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
serial: sunsab: use container_of to resolve uart_sunsu_port from uart_port 2014-11-06T03:20:52+00:00 Fabian Frederick fabf@skynet.be 2014-10-05T17:01:10+00:00 726657653ff1400bd144b6f293b907d2a1fc9865 Use container_of instead of casting first structure member. Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: drop owner assignment from platform_drivers 2014-10-20T14:21:45+00:00 Wolfram Sang wsa@the-dreams.de 2014-10-20T14:21:45+00:00 9144b3cded04a05d4b4e18dc9dcfb5b8ada3f2fc A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
serial: sunsab: Don't enable tx if tx stopped 2014-09-08T23:22:42+00:00 Peter Hurley peter@hurleysoftware.com 2014-09-02T21:39:17+00:00 98f8b83d6a504615f52a095acf92a2bdad985ae0 The serial core may call the UART driver's start_tx() even if tx is stopped; the UART driver must verify tx should be enabled before transmitting. Reported-by: Sam Ravnborg <sam@ravnborg.org> cc: David S. Miller <davem@davemloft.net> cc: <sparclinux@vger.kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The serial core may call the UART driver's start_tx() even if
tx is stopped; the UART driver must verify tx should be enabled
before transmitting.

Reported-by: Sam Ravnborg <sam@ravnborg.org>
cc: David S. Miller <davem@davemloft.net>
cc: <sparclinux@vger.kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: Fix send_xchar() handlers 2014-09-08T23:22:42+00:00 Peter Hurley peter@hurleysoftware.com 2014-09-02T21:39:15+00:00 db106df32d679db151b48a09543b03ee41cb2580 START_CHAR() & STOP_CHAR() can be disabled if set to '\0' (__DISABLED_CHAR). UART drivers which define a send_xchar() handler must not transmit __DISABLED_CHAR. Document requirement. Affected drivers: sunsab sunhv cc: David S. Miller <davem@davemloft.net> cc: <sparclinux@vger.kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
START_CHAR() & STOP_CHAR() can be disabled if set to '\0'
(__DISABLED_CHAR).  UART drivers which define a send_xchar()
handler must not transmit __DISABLED_CHAR.

Document requirement.

Affected drivers:
sunsab
sunhv

cc: David S. Miller <davem@davemloft.net>
cc: <sparclinux@vger.kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next 2014-08-06T16:41:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-08-06T16:41:23+00:00 049711bf3cc59501ebeae621aa22acd3918ebd79 Pull sparc updates from David Miller: 1) Add sparc RAM output to /proc/iomem, from Bob Picco. 2) Allow seeks on /dev/mdesc, from Khalid Aziz. 3) Cleanup sparc64 I/O accessors, from Sam Ravnborg. 4) If update_mmu_cache{,_pmd}() is called with an not-valid mapping, do not insert it into the TLB miss hash tables otherwise we'll livelock. Based upon work by Christopher Alexander Tobias Schulze. 5) Fix BREAK detection in sunsab driver when no actual characters are pending, from Christopher Alexander Tobias Schulze. 6) Because we have modules --> openfirmware --> vmalloc ordering of virtual memory, the lazy VMAP TLB flusher can cons up an invocation of flush_tlb_kernel_range() that covers the openfirmware address range. Unfortunately this will flush out the firmware's locked TLB mapping which causes all kinds of trouble. Just split up the flush request if this happens, but in the long term the lazy VMAP flusher should probably be made a little bit smarter. Based upon work by Christopher Alexander Tobias Schulze. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: sparc64: Fix up merge thinko. sparc: Add "install" target arch/sparc/math-emu/math_32.c: drop stray break operator sparc64: ldc_connect() should not return EINVAL when handshake is in progress. sparc64: Guard against flushing openfirmware mappings. sunsab: Fix detection of BREAK on sunsab serial console bbc-i2c: Fix BBC I2C envctrl on SunBlade 2000 sparc64: Do not insert non-valid PTEs into the TSB hash table. sparc64: avoid code duplication in io_64.h sparc64: reorder functions in io_64.h sparc64: drop unused SLOW_DOWN_IO definitions sparc64: remove macro indirection in io_64.h sparc64: update IO access functions in PeeCeeI sparcspkr: use sbus_*() primitives for IO sparc: Add support for seek and shorter read to /dev/mdesc sparc: use %s for unaligned panic drivers/sbus/char: Micro-optimization in display7seg.c display7seg: Introduce the use of the managed version of kzalloc sparc64 - add mem to iomem resource 
Pull sparc updates from David Miller:

 1) Add sparc RAM output to /proc/iomem, from Bob Picco.

 2) Allow seeks on /dev/mdesc, from Khalid Aziz.

 3) Cleanup sparc64 I/O accessors, from Sam Ravnborg.

 4) If update_mmu_cache{,_pmd}() is called with an not-valid mapping, do
    not insert it into the TLB miss hash tables otherwise we'll
    livelock.  Based upon work by Christopher Alexander Tobias Schulze.

 5) Fix BREAK detection in sunsab driver when no actual characters are
    pending, from Christopher Alexander Tobias Schulze.

 6) Because we have modules --> openfirmware --> vmalloc ordering of
    virtual memory, the lazy VMAP TLB flusher can cons up an invocation
    of flush_tlb_kernel_range() that covers the openfirmware address
    range.  Unfortunately this will flush out the firmware's locked TLB
    mapping which causes all kinds of trouble.  Just split up the flush
    request if this happens, but in the long term the lazy VMAP flusher
    should probably be made a little bit smarter.

    Based upon work by Christopher Alexander Tobias Schulze.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
  sparc64: Fix up merge thinko.
  sparc: Add "install" target
  arch/sparc/math-emu/math_32.c: drop stray break operator
  sparc64: ldc_connect() should not return EINVAL when handshake is in progress.
  sparc64: Guard against flushing openfirmware mappings.
  sunsab: Fix detection of BREAK on sunsab serial console
  bbc-i2c: Fix BBC I2C envctrl on SunBlade 2000
  sparc64: Do not insert non-valid PTEs into the TSB hash table.
  sparc64: avoid code duplication in io_64.h
  sparc64: reorder functions in io_64.h
  sparc64: drop unused SLOW_DOWN_IO definitions
  sparc64: remove macro indirection in io_64.h
  sparc64: update IO access functions in PeeCeeI
  sparcspkr: use sbus_*() primitives for IO
  sparc: Add support for seek and shorter read to /dev/mdesc
  sparc: use %s for unaligned panic
  drivers/sbus/char: Micro-optimization in display7seg.c
  display7seg: Introduce the use of the managed version of kzalloc
  sparc64 - add mem to iomem resource
sunsab: Fix detection of BREAK on sunsab serial console 2014-08-05T00:01:49+00:00 Christopher Alexander Tobias Schulze cat.schulze@alice-dsl.net 2014-08-03T14:01:53+00:00 fe418231b195c205701c0cc550a03f6c9758fd9e Fix detection of BREAK on sunsab serial console: BREAK detection was only performed when there were also serial characters received simultaneously. To handle all BREAKs correctly, the check for BREAK and the corresponding call to uart_handle_break() must also be done if count == 0, therefore duplicate this code fragment and pull it out of the loop over the received characters. Patch applies to 3.16-rc6. Signed-off-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net> Signed-off-by: David S. Miller <davem@davemloft.net> 
Fix detection of BREAK on sunsab serial console: BREAK detection was only
performed when there were also serial characters received simultaneously.
To handle all BREAKs correctly, the check for BREAK and the corresponding
call to uart_handle_break() must also be done if count == 0, therefore
duplicate this code fragment and pull it out of the loop over the received
characters.

Patch applies to 3.16-rc6.

Signed-off-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge 3.16-rc5 into tty-next. 2014-07-13T22:52:12+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2014-07-13T22:52:12+00:00 ca17749259d26f7ddbb0678790d5d534018d0a6b We want those fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We want those fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: Test for no tx data on tx restart 2014-07-10T23:31:34+00:00 Peter Hurley peter@hurleysoftware.com 2014-07-06T15:29:52+00:00 c557d392fbf5badd693ea1946a4317c87a26a716 Commit 717f3bbab3c7628736ef738fdbf3d9a28578c26c, 'serial_core: Fix conditional start_tx on ring buffer not empty' exposes an incorrect assumption in several drivers' start_tx methods; the tx ring buffer can, in fact, be empty when restarting tx while performing flow control. Affected drivers: sunsab.c ip22zilog.c pmac_zilog.c sunzilog.c m32r_sio.c imx.c Other in-tree serial drivers either are not affected or already test for empty tx ring buffer before transmitting. Test for empty tx ring buffer in start_tx() method, after transmitting x_char (if applicable). Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Seth Bollinger <sethb@digi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Cc: stable <stable@vger.kernel.org> # 3.15 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Commit 717f3bbab3c7628736ef738fdbf3d9a28578c26c,
'serial_core: Fix conditional start_tx on ring buffer not empty'
exposes an incorrect assumption in several drivers' start_tx methods;
the tx ring buffer can, in fact, be empty when restarting tx while
performing flow control.

Affected drivers:
sunsab.c
ip22zilog.c
pmac_zilog.c
sunzilog.c
m32r_sio.c
imx.c

Other in-tree serial drivers either are not affected or already
test for empty tx ring buffer before transmitting.

Test for empty tx ring buffer in start_tx() method, after transmitting
x_char (if applicable).

Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Seth Bollinger <sethb@digi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Cc: stable <stable@vger.kernel.org> # 3.15
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: treewide: Remove empty implementations of enable_ms() 2014-07-10T00:29:38+00:00 Alexander Shiyan shc_work@mail.ru 2014-06-03T14:54:44+00:00 8b152f1096975d012f60387b899d407e4a93b46c Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>